When saving a sample, use savedefconfig instead of copying
the full .config file.
This reduces the saved .config, and reduces clutter when it
is later upgraded.
Also use defconfig when retrieving a sample.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The real sources for a few files are the lex/yacc/gperf
files, and the C files are only generated...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The kconfig frontends are currently instaleld as source files. This is
a remnant of the early times, when I wanted a single installation of
crosstool-NG to be shared across multiple machines, potentially of
different architectures.
This does not really make sense, and it's been a long time since it
was las tpossible in practice.
So, just build the kconfig frontends at make-time, and install them
as we do for all other crosstool-NG dependent files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Having the crosstool-NG version in the .config helps in case we
want to reproduce the toolchain with the exact same version of
crosstool-NG.
This also reverts #bb73e7632b54.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case a set of options are conditional to two different paths,
the forward dependencies in these options is wrong, but in the
first path.
Fix by Arnaud Lacombe on linux-kbuild ML:
http://www.spinics.net/lists/linux-kbuild/msg04832.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Unlinke the Linux kernel, crosstool-NG does not (directly) use make
as a frontend, so remove any occurence of reference to running make
after the configuration.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case a choices has different combinations, it can be displayed
more than once.
See the discussion thread on the linux-kbuild ML:
http://www.spinics.net/lists/linux-kbuild/msg04709.html
The fix applied here was proposed by Arnaud LACOMBE.
That fix, or a similar one, will probably be pushed upstream soon.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In crosstool-NG, we use env variables for the backend mode.
So it is perfectly legit that these variables are not set.
So do not warn about it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
check-lxdialog.sh breaks on 64-bit distributions which are lacking
the lib -> lib64 symlinks (eg. some Fedora).
The script from the 2.6.35 Linux kernel is reportedly functional
on the systems that were requiring the current hack. See:
http://sourceware.org/ml/crossgcc/2010-09/msg00113.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Allow stdin/stdout redirection for the CLI conf (not mconf).
This allows to recall a sample and automatically apply the defaults
to new configuration option, with something like the following:
yes "" |ct-ng "sample_name"
- cleanup conf.exe and mconf.exe as well as their non-.exe counterparts.
/trunk/kconfig/kconfig.mk | 2 1 1 0 +-
1 file changed, 1 insertion(+), 1 deletion(-)
- better allocate CFLAGS/LDFLAGS to object and dependency files
- only include the needed dependency files
- cleanly handle the kconfig/ check and creation
- use HOST_LD to link, not HOST_CC (even if both are set to 'gcc' for now)
- get rid of defoldconfig, it does not make much sense using it.
/trunk/kconfig/kconfig.mk | 110 66 44 0 ++++++++++++++++++++++++++++++++---------------------
1 file changed, 66 insertions(+), 44 deletions(-)
- create config/config.mk, with all the config.gen/ rules
- the only common points between config files and configurators:
- the top-level config file to include, stored in KCONFIG_TOP
- the config_file rules, which makes config files available to configurators
- dependency-files are renamed from %.d to %.dep (.d is reserved for directories)
- a few eye-candy here and there
/trunk/kconfig/kconfig.mk | 184 12 172 0 +++--------------------------------------------------
/trunk/config/config.mk | 118 9 109 0 +++-------------------------------
/trunk/ct-ng.in | 1 1 0 0 +
3 files changed, 22 insertions(+), 281 deletions(-)
- silent/quiet/verbose build:
- ct-ng by default only prints quit messages, such as "CC xxx",
- if using V=0, nothing is printed,
- if using V=1, the full command lines are printed,
- other values are indeterminate,
- should help in debugging the kconfig stuff;
- complete kconfig/{,m}conf generation:
- fully dynamic dependencies on source files,
- compilation of .c into .o, then linking (instead of direct linking),
- VPATH usage when not --local;
Typo + a coment moved.
/trunk/kconfig/kconfig.mk | 140 87 53 0 +++++++++++++++++++++++++++++++++--------------------
/trunk/tools/tools.mk | 12 6 6 0 ++--
/trunk/steps.mk | 6 3 3 0 +-
/trunk/samples/samples.mk | 30 15 15 0 +++++-----
/trunk/ct-ng.in | 40 28 12 0 +++++++++++----
5 files changed, 139 insertions(+), 89 deletions(-)
- better handle config file generation dependencies
- get rid of CT_TOP_DIR where useless
- rearrange code to be cleaner, and add adequate '#----' comments to split the different parts
- a few eye-candy here and there
/trunk/kconfig/kconfig.mk | 158 99 59 0 +++++++++++++++++++++++++++++++++--------------------
1 file changed, 99 insertions(+), 59 deletions(-)
- change the menu label from 'Target OS' to 'Operating System',
- bare-metal is a kind of kernel (OS), rename to 'bare-metal' from 'none',
- update the kconfig.mk to generate the kernel choice entries,
- update glibc&eglibc kernel version option accordingly.
Update the debug & tools confiog file generation to match with arch & kernel.
Print terse command lines when building in kconfig/ (a-la Linux kernel).
Fix the makefile rules in kconfig/kconfig.mk to be /simple/ rules.
/trunk/kconfig/kconfig.mk | 117 81 36 0 +++++++++++++++++++++----------
/trunk/config/kernel/linux.in | 4 4 0 0 +
/trunk/config/kernel/bare-metal.experimental.in | 15 15 0 0 ++++
/trunk/config/kernel.in | 33 5 28 0 +--------
/trunk/config/libc/glibc-eglibc-common.in | 4 2 2 0
5 files changed, 107 insertions(+), 66 deletions(-)