Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.
Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"
Hence, expat should be considered mandatory.
On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.
This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, check_for() can only test one of prog, inc or lib at once. This patch
removes this limitation.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Currently, error messages just state the obvious: a required
component is required. While in some cases, there is not much
else to say, in some other cases we could tell much more.
For example, a missing libstdc++ means no static toolchain.
Also, format error and warning messages in a similar fashion,
with a {error,warning} intro, followed by the message specified
by the caller.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The latest autocompletion calls 'make -qp' to get all the possible
targets. This currently fails, as our makefile is calling itself
again and again ad-libitum.
Fix it by detecting that the recursion level is not 0, and bail out
if so. It works so well that it has the side effect of showing only
the 'public' target, and hide our internal ones! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The NPTL add-on has always been internal, so there is no
reason to try downloading it, it will never succeed.
Add provision to skip other add-ons as well.
For consistency, do the same test in both glibc and eglibc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"crosstool-NG-${CT_VERSION}" is currently the default for TOOLCHAIN_PKGVERSION,
and this options is passed as is to --with-pkgversion.
This patch prepends "crosstool-NG ${CT_VERSION}" to TOOLCHAIN_PKGVERSION before
passing it to --with-pkgversion.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Hide the staticaly linked libstdc++ option if the static libstdc++ is not
present, detected at configure time.
Add a blind option that says whether static linking is possible at all.
It defaults to 'y', but depends on the needed CONFIGURE_* options. For
now, it only depends on static libtdc++, but new dependencies can be
easily added.
Hide the global static toolchain option behind this new option.
Original patch by Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's probably a good thing to check for at least one instance of
libstdc++.{so,dylib,a} at configure time. At least one is needed
by the companion libraries and gcc.
Original patch by Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some addons are bundled with glibc/eglibc, so we should not try to
download and extract them.
This is done as thus:
- at download time:
- if the add-on download fails, keep going;
- at extract time:
- if the addon is present in the source tree, ignore it;
- if the addon is missing in the source tree:
- if the archive is present, extract it;
- if the archive is missing, bail out.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
eglibc is only available from SVN. The script currently calls svn
in its own tortuous and convoluted way.
Use the egeneric SVN extract functions, and sinplify the eglibc
download function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to retrieve the add-on
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For glibc/eglibc, if the add-on can not be extracted, we want to catch
the error to print a meaningful error message.
So:
- try to extract the tarball
- if it fails, print a waring instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing extract procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of glibc/eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on tarball can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to download the tarball
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch makes gdb benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes eglibc benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch makes binutils benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch promotes the PKGVERSION and BUGURL options to toolchain level so that
all toolchain components supporting them can benefit from them.
These options are passed to configure through --with-pkgversion and
--with-bugurl.
They are supported by binutils 2.18+, gcc 4.3+, eglibc 2.9+ and gdb 7.0+.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a blind option CC_GCC_HAS_PKGVERSION_BUGURL to test the support
of --with-pkgversion and --with-bugurl by GCC's configure.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a function to extract major, minor, revision, etc. from version
numbers.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
kconfig bools are disabled by default, so specifying 'default n' is useless and
noisy. This patch removes all occurrences of 'default n'.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
glibc and eglibc have a very similar extraction process, so it
makes sense to commonalise it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Fixes the issue with {e,}glibc addons having short and long names (such as
eglibc-ports-2_13 and ports), which caused configure scripts to run
through them twice and thus configuring incorrectly.
For instance, the mips64el-n32-linux-gnu toolchain would be recognized
correctly first, but then the second pass would change it to mips32,
building a mixed MIPS-III N32 and MIPS-I libc.
Signed-off-by: Nicolás Reynolds <fauno@kiwwwi.com.ar>
[yann.morin.1992@anciens.enib.fr: remove spurious trailing spaces]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If check_for is able to find the required prog/inc/lib, allow it to
set an arbitrary variable to 'y'. This variable is then pushed down
to the kconfig definition.
For example:
has_or_abort prog=foobar kconfig=has_foobar
If foobar is available, it yields a kconfig variable defaulting to y:
config CONFIGURE_has_foobar
bool
default y
If foobar is missing, it yields a kconfig variable defaulting to n:
config CONFIGURE_has_foobar
bool
Thus it is possible to depends on that variabel to show/hide options:
config SOME_FEATURE
bool
prompt "Some feature"
depends on CONFIGURE_has_foobar
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When has_or_warn will come, we do want to print the error message
only in has_or_abort, so move it down there.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch sets the runtime sysroot to fix the following GDB warning:
"Unable to find dynamic linker breakpoint function.
GDB will be unable to debug shared library initializers
and track explicitly loaded dynamic code."
The sysroot can later be changed within gdb with the `set sysroot`
command if necessary.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
In case a set of options are conditional to two different paths,
the forward dependencies in these options is wrong, but in the
first path.
Fix by Arnaud Lacombe on linux-kbuild ML:
http://www.spinics.net/lists/linux-kbuild/msg04832.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Update help entries for thos variables that accept multiple
arguments with spaces (aka. array-capable variables).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Transfrom array variables from pure strings (in the kconfig output)
into proper bash arrays declarations, for feeding to the build scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Make it explicit that a variable is an array bu the name of the variable.
It will be used later when .config gets munged to allow both multiple
arguments and arguments with spaces at the same time to be passed from the
configuration down to the build scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
By default, PPL wants to build interfaces for any of a variety of
langauges it finds on the local host (python, java, possibly perl, also
more esoteric languages such as ocaml and prolog).
These extra interfaces can double the compile time for the library. For
single-process builds, I found a savings of more than 40%:
default / j1: 716s total, 143.2s avg, 0.52s stdev
just_c / j1: 406s total, 81.2s avg, 0.33s stdev
just_c_cpp / j1: 413s total, 82.6s avg, 0.22s stdev
And for multi-process builds, it approached 50%:
default / j4: 625s total, 125.0s avg, 0.57s stdev
just_c / j4: 338s total, 67.6s avg, 1.25s stdev
just_c_cpp / j4: 327s total, 65.4s avg, 0.36s stdev
Since the PPL we build within ct-ng is only used by GCC, we only need to
build the C and C++ interfaces.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
PPL does not use the "--enable-cxx" configure switch at all; it's
possibly a cut-and-paste leftover from 'gmp.sh'. (PPL is written in C++
natively, so it doesn't make much sense to have to enable C++; GMP, on
the other hand, is written in C with an optional C++ wrapper.)
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
'configure' for PPL 0.11 (and later) needs "--with-gmp-prefix" to
provide the location of the GMP toolkit; the previous switches were
"--with-libgmp-prefix" and "--with-libgmpxx-prefix".
The upstream log message is:
commit 08dfb6fea094f8c5a533575a3ea2095edce99a6d
Author: Roberto Bagnara <bagnara@cs.unipr.it>
Date: Sun Jul 12 21:39:46 2009 +0200
New configure option --with-gmp-prefix supersedes the (now removed)
options --with-libgmp-prefix and --with-libgmpxx-prefix.
Link: http://www.cs.unipr.it/git/gitweb.cgi?p=ppl/ppl.git;a=commit;h=08dfb6fea094f8c5a533575a3ea2095edce99a6d
Since PPL's 'configure' ignores unknown switches, we use all three so we
don't have to conditionalize the ppl.sh build script itself.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
Now that kconfig can include a file multiple times, link the glibc/eglibc
common stuff to two .in.2 files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Unlinke the Linux kernel, crosstool-NG does not (directly) use make
as a frontend, so remove any occurence of reference to running make
after the configuration.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case a choices has different combinations, it can be displayed
more than once.
See the discussion thread on the linux-kbuild ML:
http://www.spinics.net/lists/linux-kbuild/msg04709.html
The fix applied here was proposed by Arnaud LACOMBE.
That fix, or a similar one, will probably be pushed upstream soon.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
