Alexey Neyman
7186e39f32
Run all configure scripts using ${CONFIG_SHELL}
...
... as its help message says in menuconfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-25 00:06:28 -08:00
Alexey Neyman
fb426ac912
Replace strace workaround with a patch.
...
The correct solution was checked in to strace GIT; will be part of the
next release. Backport patch to 4.10..4.15, and remove the workaround
from 500-strace.sh. Versions 4.9 and older should build fine even
without the workaround (they would be picking up wrong definitions,
but they need different patch and I don't feel like spending any time
on these versions).
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-16 09:07:59 -08:00
Alexey Neyman
c1612e9295
Use ${CT_CC} instead of gcc ...
...
... when refering to target's compiler.
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-13 21:47:07 -08:00
Alexey Neyman
c69e593a92
Pick up <linux/ioctl.h> and friends from TARGET.
...
Otherwise, cross-compiling fails on non-Linux build machines.
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-10 10:39:37 -08:00
Alexey Neyman
7989e5d743
${LD_TARGET} -> ${CT_TARGET}.
...
Obvious typo, worked by some miracle.
Signed-off-by: Alexey Neyman <stilor@att.net>
2017-01-10 10:39:37 -08:00
Alexey Neyman
488b27f58b
Partially revert 6f8e89cb5c
.
...
The referenced commit replaced 'make' with '${make}' everywhere. This is
wrong for at least the utilities that we may build as companion tools
(make, libtool): this will always invoke the version detected by configure
by supplying the absolute path. In other words, the wrappers in
.build/tools/bin are not fallbacks - they are either temporary (in case
a respective companion tool is built) or permanent redirectors.
This is the reason why the PATH= has .build/*/buildtools/bin at higher
precedence than .build/tools/bin; the latter has the versions detected by
configure and the former has the versions built as companion tools.
Revert the rest of the gang (grep/sed/...) for consistency. After all,
we may decide to supply some of them as well (awk, for instance).
Signed-off-by: Alexey Neyman <stilor@att.net>
2016-11-20 23:50:17 -08:00
Bryan Hundven
6f8e89cb5c
consistency: Use exported variables of required tools
...
We check for apps:
* make
* sed
* grep
* awk
* libtool/libtoolize
* install
* patch
* and more
...during configure. Our scripts should be consistent about using the
variables that define where the found tool was found.
Of course, we do hard-link these tools in buildtools, but that should be
a backup for the components we are building. Our scripts should always
use the tools we find.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
2015-11-17 02:48:09 -08:00
Samuel Martin"
96b2e3c3f6
debug/strace: enforce cross-compilation
...
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Message-Id: <24b6540a08cbca7ee1fa.1363446263@laptop>
Patchwork-Id: 228220
2013-03-16 15:47:56 +01:00
Bryan Hundven
6e65a05261
scripts: use generic urls for sourceforge
...
For expat, duma, and strace, use the generic url and 302 to the mirror
instead of trying to download a file from a downed mirror and
failing.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Message-Id: <b69ebeb72fef93c04c84.1345364051@flambe.is-a-geek.org>
2012-08-19 01:09:40 -07:00
Yann E. MORIN"
c427fcce6b
debug/strace: fix download URL
...
strace upstream location has slightly changed.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
2012-03-12 21:19:26 +01:00
Yann E. MORIN"
b02975d5e8
scripts: fix download from sourceforge
...
It seems sourceforge changed yet again the way to download files.
This time, no longer use their 'mesh' thingy, and hard-code the
server to use in the URL... Sigh... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
2012-02-05 23:26:55 +01:00
Anthony Foiani
92898249bd
scripts: add "FILE" and "CFG" debug levels.
...
I ran into some minor difficulties looking through the build log for a
particular file: I wasn't interested in seeing it unpacked, but only
when it is built or installed. Adding these two levels allows me to
differentiate between those cases.
[Yann E. MORIN: Those are blind log levels, and are used only to search
in the build-log afterward.]
Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
2010-10-22 22:02:57 +02:00
Yann E. MORIN"
bf86627982
scripts/functions: make CT_Patch dumber
...
It is the responsibility of the caller to split the package name from
its version. It already knows that.
2010-04-11 23:18:10 +02:00
Yann E. MORIN"
6822fae02e
Allow user to add a directory component in the sys-root path.
...
Rename CT_DEBUG_INSTALL_DIR to CT_DEBUGROOT_DIR (to match CT_SYSROOT_DIR).
As a side effect, fix creating lib64->lib symlinks.
/trunk/scripts/build/debug/100-dmalloc.sh | 2 1 1 0 +-
/trunk/scripts/build/debug/400-ltrace.sh | 2 1 1 0 +-
/trunk/scripts/build/debug/300-gdb.sh | 6 3 3 0 +++---
/trunk/scripts/build/debug/500-strace.sh | 2 1 1 0 +-
/trunk/scripts/build/debug/200-duma.sh | 6 3 3 0 +++---
/trunk/scripts/crosstool-NG.sh.in | 16 7 9 0 +++++++---------
/trunk/scripts/functions | 2 1 1 0 +-
/trunk/config/toolchain.in | 17 17 0 0 +++++++++++++++++
8 files changed, 34 insertions(+), 19 deletions(-)
2009-03-03 17:41:59 +00:00
Yann E. MORIN"
ebf01acb41
Split CT_ExtractAndPatch in two: CT_Extract and CT_Patch:
...
- it is unworkable to have CT_ExtactAndPAtch cope with all those silly glibc addons:
- they can have 'short' (as 'ports') or 'long' (as glibc-ports-2.7) names
- patches are against eithe the short or long name, but non-uniformly use one or the other
- it is the reposibility of the component (glibc in this case) to handle corner cases such as those
- update all components to use the new functions
/trunk/scripts/build/tools/000-template.sh | 3 2 1 0 +-
/trunk/scripts/build/tools/100-libelf.sh | 3 2 1 0 +-
/trunk/scripts/build/tools/200-sstrip.sh | 3 2 1 0 +-
/trunk/scripts/build/kernel/linux.sh | 3 2 1 0 +-
/trunk/scripts/build/binutils.sh | 3 2 1 0 +-
/trunk/scripts/build/cc/gcc.sh | 3 2 1 0 +-
/trunk/scripts/build/debug/000-template.sh | 3 2 1 0 +-
/trunk/scripts/build/debug/100-dmalloc.sh | 3 2 1 0 +-
/trunk/scripts/build/debug/400-ltrace.sh | 3 2 1 0 +-
/trunk/scripts/build/debug/300-gdb.sh | 9 6 3 0 +++--
/trunk/scripts/build/debug/500-strace.sh | 7 3 4 0 ++--
/trunk/scripts/build/debug/200-duma.sh | 19 8 11 0 ++++------
/trunk/scripts/build/libc/glibc.sh | 14 12 2 0 ++++++-
/trunk/scripts/build/libc/uClibc.sh | 13 9 4 0 +++++--
/trunk/scripts/build/libc/eglibc.sh | 14 12 2 0 ++++++-
/trunk/scripts/build/gmp.sh | 3 2 1 0 +-
/trunk/scripts/build/mpfr.sh | 3 2 1 0 +-
/trunk/scripts/functions | 68 36 32 0 +++++++++++++++++++-----------------
18 files changed, 108 insertions(+), 69 deletions(-)
2009-01-05 23:02:43 +00:00
Yann E. MORIN"
b8b7843bea
Get rid of all stuff related to building a /delivery' traball:
...
- building a delivery tarball has long been broken (since crostool-Ng is installable)
- get rid of implied do_print_filename, that can be mis-leading now tarballs can not be built
/trunk/scripts/build/kernel/bare-metal.sh | 4 0 4 0 ----
/trunk/scripts/build/kernel/linux.sh | 4 0 4 0 ----
/trunk/scripts/build/tools/000-template.sh | 11 0 11 0 -----------
/trunk/scripts/build/tools/100-libelf.sh | 4 0 4 0 ----
/trunk/scripts/build/tools/200-sstrip.sh | 11 1 10 0 +----------
/trunk/scripts/build/binutils.sh | 4 0 4 0 ----
/trunk/scripts/build/cc/gcc.sh | 5 0 5 0 -----
/trunk/scripts/build/debug/000-template.sh | 11 0 11 0 -----------
/trunk/scripts/build/debug/100-dmalloc.sh | 4 0 4 0 ----
/trunk/scripts/build/debug/400-ltrace.sh | 4 0 4 0 ----
/trunk/scripts/build/debug/300-gdb.sh | 7 0 7 0 -------
/trunk/scripts/build/debug/500-strace.sh | 4 0 4 0 ----
/trunk/scripts/build/debug/200-duma.sh | 4 0 4 0 ----
/trunk/scripts/build/libc/none.sh | 5 0 5 0 -----
/trunk/scripts/build/libc/glibc.sh | 10 0 10 0 ----------
/trunk/scripts/build/libc/uClibc.sh | 6 0 6 0 ------
/trunk/scripts/build/libc/eglibc.sh | 10 0 10 0 ----------
/trunk/scripts/build/gmp.sh | 6 0 6 0 ------
/trunk/scripts/build/mpfr.sh | 6 0 6 0 ------
/trunk/docs/overview.txt | 9 0 9 0 ---------
20 files changed, 1 insertion(+), 128 deletions(-)
2009-01-03 21:11:41 +00:00
Yann E. MORIN"
82c9d1aceb
Simplify the Tools and Debug facilities menu entries:
...
- each config file no longer have to define their own 'menuconfig foo - if FOO - endif' gym
- each build script no longer has to say wether they are enabled
- generation of the 'menuconfig' entries for the Tools and Debug facilities now uses the same code
Some re-ordering of the code to be consistent with the steps ordering (tools, then debug).
/trunk/kconfig/kconfig.mk | 66 43 23 0 +++++++++++++++++++++++-------------
/trunk/scripts/build/debug.sh | 14 9 5 0 +++++---
/trunk/scripts/build/tools/000-template.sh | 7 0 7 0 ----
/trunk/scripts/build/tools/100-libelf.sh | 3 0 3 0 --
/trunk/scripts/build/tools/200-sstrip.sh | 2 0 2 0 -
/trunk/scripts/build/debug/000-template.sh | 7 0 7 0 ----
/trunk/scripts/build/debug/100-dmalloc.sh | 3 0 3 0 --
/trunk/scripts/build/debug/400-ltrace.sh | 3 0 3 0 --
/trunk/scripts/build/debug/300-gdb.sh | 3 0 3 0 --
/trunk/scripts/build/debug/500-strace.sh | 3 0 3 0 --
/trunk/scripts/build/debug/200-duma.sh | 3 0 3 0 --
/trunk/scripts/build/tools.sh | 14 9 5 0 +++++---
/trunk/scripts/crosstool.sh | 2 1 1 0
/trunk/config/debug/ltrace.in | 14 3 11 0 ++------
/trunk/config/debug/dmalloc.in | 9 1 8 0 +----
/trunk/config/debug/gdb.in | 9 1 8 0 +----
/trunk/config/debug/strace.in | 10 1 9 0 -----
/trunk/config/debug/duma.in | 10 1 9 0 -----
/trunk/config/tools/libelf.in | 12 2 10 0 +------
/trunk/config/tools/sstrip.in | 10 1 9 0 -----
/trunk/config/config.in | 4 2 2 0 +-
21 files changed, 74 insertions(+), 134 deletions(-)
2008-10-10 14:30:44 +00:00
Yann E. MORIN"
f4f3f526b8
Remove garbage files left behind by downloads from sourceforge.net.
...
/trunk/scripts/build/debug/500-strace.sh | 4 4 0 0 ++++
/trunk/scripts/build/debug/200-duma.sh | 5 4 1 0 ++++-
2 files changed, 8 insertions(+), 1 deletion(-)
2008-07-22 14:17:10 +00:00
Yann E. MORIN"
6e1b1ccb7d
Use CT_DoExecLog when building tools and debug utilities.
...
/trunk/scripts/build/tools/200-sstrip.sh | 12 6 6 0 ++++++------
/trunk/scripts/build/debug/100-dmalloc.sh | 10 5 5 0 +++++-----
/trunk/scripts/build/debug/400-ltrace.sh | 5 3 2 0 +++--
/trunk/scripts/build/debug/300-gdb.sh | 30 17 13 0 +++++++++++++++++-------------
/trunk/scripts/build/debug/500-strace.sh | 7 4 3 0 ++++---
/trunk/scripts/build/debug/200-duma.sh | 5 3 2 0 +++--
6 files changed, 38 insertions(+), 31 deletions(-)
2008-07-14 21:57:57 +00:00
Yann E. MORIN"
ff1d30c4a3
For tools/ and debug/ build scripts, annd a numeric prefix, so that they always get built in the same order, in case of library dependencies.
...
/trunk/scripts/build/debug.sh | 2 1 1 0 +-
/trunk/scripts/build/tools.sh | 2 1 1 0 +-
2 files changed, 2 insertions(+), 2 deletions(-)
2008-05-02 21:59:14 +00:00