... that exhibited the issue with elf2flt configuration. Original reported
did not provide the config, and did not respond.
Signed-off-by: Alexey Neyman <stilor@att.net>
For that, make CT_BUILD_TOP_DIR a non-settable config option (so that it is
recursively expanded with CT_HOST/CT_TARGET). Use a common prefix, with
same default as for regular sample build.
Use showConfig.sh to determine host toolchain path (for canadian crosses)
and build directory to be removed.
Remove LIBC_SYSROOT_ARG (unused).
Signed-off-by: Alexey Neyman <stilor@att.net>
So that 'ct-ng saveconfig' works properly.
Also, run it through 'ct-ng saveconfig' so that default options are removed.
Signed-off-by: Alexey Neyman <stilor@att.net>
This follows the trend set by 1*.sh scripts that configure ISL, GMP,
MPFR, CLooG, etc. Building with shared libraries presents all kinds
of problems:
- The shared libraries need to be installed into ${CT_PREFIX_DIR}.
- The binaries linked against companion libs need to have proper
RPATH, or they're looking for shared libs in
.build/${CT_PREFIX}/buildtools/lib.
- All libraries must agree as to whether they're built shared,
static, or both. Otherwise, gettext tries to link in static libncurses.a
into a shared library and fails (since libncurses was compiled without
the -fPIC switch and hence contains relocations that cannot be handled
in a shared library).
So this fixes the current mess. If we decide to re-enable building
the companion libs shared, we should probably make this dependent on
a separate suboption of CT_STATIC_TOOLCHAIN.
Add a config loosely based on one reported in the issue 274.
Signed-off-by: Alexey Neyman <stilor@att.net>
This enables the resulting toolchaing to be used to build a canadian
cross to x86_64-pc-linux-gnu target. Unmark that sample as broken,
it now builds successfully.
It is likely that it is affected by issue #483, too - I see the
resulting gcc executable has a DLL dependency on libiconv-2.dll,
which is only installed into .build/.../buildtools. This will be
investigated/fixed separately.
Signed-off-by: Alexey Neyman <stilor@att.net>
Put xtensa core name to the tuple vendor string (without any overlay the
default core is 'fsf') and rename sample directory accordingly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add -mlongcalls and -mtext-section-literals to target CFLAGS. Target
libraries built with these flags have great call range, useful for linux
applications.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
To build uClibc correctly we need correct endianness selected in the
crosstool-NG. Xtensa cores may be little- or big-endian, but this
property is static. The toolchain knows the core endianness and doesn't
need options to select it.
Enable ARCH_SUPPORTS_BOTH_ENDIAN and select LE by default. Specify empty
CT_ARCH_ENDIAN_CFLAG so that -m{big,little}-endian don't get added to
the TARGET_CFLAGS, as it's not supported by gcc. Specify empty
CT_ARCH_ENDIAN_LDFLAG so that -EB/-EL don't get added to the
TARGET_LDFLAGS as they are ignored. Select big-endian in the example
xtensa-unknown-linux-uclibc configuration.
This fixes uClibc toolchain build for little-endian cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
No threads (uclibc/libpthread does not compile on ARMv8); no C++ (libitm
depends on pthreads), no GDB/DUMA (depend on threads).
Signed-off-by: Alexey Neyman <stilor@att.net>
Based on the following samples:
- x86_64-unknown-linux-gnu (-m64/-m32/-mx32)
- powerpc64-unknown-linux-gnu (-m64/-m32)
- mipsel-unknown-linux-gnu (-mabi={32,n32,64})
- sh4-unknown-linux-gnu (-m4/-m4a)
- x86_64-unknown-linux-uclibc (-m64/-m32)
- mips64el-unknown-linux-uclibc (-mabi={32,n32,64})
New samples:
- sparc64-multilib-linux-gnu (-m64/-m32)
- sh4-multilib-linux-uclibc (-m4/-m4a/-m3)
- x86_64-multilib-linux-musl (-m64/-m32)
Notably missing is arm-unknown-linux-gnu (aprofile): GLIBC does not
compile in one of the variants in its multilib set (-march=armv4t
-mthumb) due to missing atomic ops implementation.
Signed-off-by: Alexey Neyman <stilor@att.net>
This change adds a powerpc64le-unknown-linux-gnu sample that can be used
to quickly create a little-endian tool-chain for powerpc64
architecture. This sample is based on the earlier work done by "Yann
E. MORIN" to add support for powerpc64 tool chain and implementing the
power64-unknown-linux-gnu sample. The existing sample however generates
a big-endian tool chain by default.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
With avr-libc 2.0.0 released, we no longer need to force gcc 4.9.x for
the avr toolchain. So, remove the gcc version constraint and allow it to
follow the default gcc version. There is also no need to force companion
libraries' versions anymore.
The 'experimental' flag was also removed from the description as it
seems to be following upstream development now.
This sample has been build tested on Arch Linux and Ubuntu 14.04 hosts.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
I couldn't get this sample to build. I tried rolling ct-ng back to 1.22
and back to the commit that introduced it, to no avail. Not sure if it
ever built on my machine.
The first problem is the failure to build binutils/gold because of the
missing <pthread.h> in mingw. However, even if CT_BINUTILS_GOLD_THREADS
option is unset, the build dies in configure of the pass-1 of the core CC.
The config.log states that it failed to link with libmpfr.a, which has
a lot of undefined references to symbols like '__imp___iob_func'.
Googling shows that these symbols are some dark Cygwin/MinGW magic and I
do not have the knowledge of these arcana. Let some other MinGWizard fix
it another day.
Signed-off-by: Alexey Neyman <stilor@att.net>
There is invalid assembly in dmalloc for PowerPC. The issue is that
'stw' expects a memory operand, and =g constraint allows both registers
and memory. Newer GCC tends to choose register even at -O0, resulting in
invalid assembly. Instead, force a register constraint in 'mflr' and let
GCC decide if it wants to store it into memory at all.
Reported this upstream.
Signed-off-by: Alexey Neyman <stilor@att.net>
With the upcoming release of 1.22.0, mingw-w64 is still in an
experimental state, and is not considered to be fully supported yet.
This change should be reverted after the release.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As per 4be766254d, mips64 is not longer
experimental, and as such, the samples should not need it enabled.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Drop ARCH_ARCH/ARCH_TUNE where it is overridden by ARCH_CPU. Also, same
updates as in the previous batch for architectures with
!ARCH_EXCLUSIVE_WITH_CPU (i.e. where there is no need to drop
ARCH_CPU/ARCH_TUNE).
Signed-off-by: Alexey Neyman <stilor@att.net>
I was going to start doing some autoconf work, and noticed that
configure.in was executable. Then I noticed Makefile.in was executable.
o.O
So, I ran ```find . -type f -executable``` and found a bunch of files
that shouldn't be set executable.
This commit makes them normal files again.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes per-sample configuration files for uClibc and falls
back to using the default config file in contrib/uClibc-defconfigs.
Only one sample is broken:
* powerpc-unknown-linux-uclibc
* breaks on dmalloc
I will come back and work on the dmalloc failure later, but I don't want it to
hold up getting uClibc-ng out in ct-ng.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes blackfin support.
I'm open to re-adding blackfin after crosstool-1.23.0 is released, but
it is currently too difficult to port forward to newer versions of gcc
and uclibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change, as per #222, reduces the number of supported releases of
gcc to the latest branch releases.
I noticed while doing this work that gcc-4.5.4 was never added, so I
moved patches for gcc-4.5.3 to 4.5.4 and updated the
bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed
upstream in the 4.5.4 release, so this patch is omitted.
I also bumped the avr sample to 4.9.3 from 4.9.2.
With the addition of gcc-5.x, the gcc release team now releases the
major.minor.0 versions, while updates to the branch are available in
svn/git. We'll address that when we get to issue #219. This change just
removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes
CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later.
This is the first of two part changes, as mentioned in #222.
This change is slated for release in 1.22.0. The next change will be
slated for 1.23.0, and will limit gcc versions to what is on
https://gcc.gnu.org under "Release Series and Status", which is
currently 4.9.3 and 5.2.0, although I will also support the previous
supported version. In this example that would be 4.8.5.
Last, but not least, this change also retires AVR32 support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Some older versions of configure (including the one in GMP 4.3.2)
interpret the $ECHO environment variable as the `echo' utility to
use. CT-NG sets the variable to `:' and exports it if V=0 or V=1
is supplied, breaking the samples using such configure. This currently
includes bfin-unknown-linux-uclibc and powerpc-unknown-linux-uclibc.
Also, correct the description of the V= variable - V=0 is *not* the
default; in fact, default does not correspond to any of the V=[012]
values.
Signed-off-by: Alexey Neyman <stilor@att.net>
Instead, continue until the end and provide a summary (PASS/XFAIL/FAIL)
at the end. If there are any FAILs, exit with code 1.
Signed-off-by: Alexey Neyman <stilor@att.net>
First, build cross samples (indicated by lack of comma in their names);
then, build canadian cross samples (and, when they are supported,
cross-native). While building canadian cross, set up the path to the
build-to-host cross if it was built previously.
Signed-off-by: Alexey Neyman <stilor@att.net>
'make oldconfig' results in asking the user about options not explicitly
set in the defconfig. Instead of copying, run 'conf --defconfig', as in
the normal sample's build sequence. Also, invoke 'conf --oldconfig'
directly, with a -s option, to avoid spamming with useless
"configuration written to .config" messages.
Signed-off-by: Alexey Neyman <stilor@att.net>
With current name, 'make saveconfig' is broken for this sample. Also, it
is confusing to have a sample named 'nios2-elf-mingw32' while show-tuple
refers to it as 'nios2-spico-elf' and saveconfig attempts to save it
into 'i686-w64-mingw32,nios2-spico-elf'.
Signed-off-by: Alexey Neyman <stilor@att.net>
Building cross-gdb in canadian cross requires expat/ncurses for the
host. Currently, 300-gdb.sh only builds expat/ncurses for the target
(for native-gdb). For cross-gdb on regular cross (build==host), expat
and ncurses are expected to be provided by the host.
There are two approaches possible:
- If building for canadian cross, build expat/ncurses for cross-gdb
just as the native-gdb does.
- Promote expat/ncurses to first class citizens and build them as
companion libs during the build of the build-to-host toolchain.
I am leaning towards the latter approach - it would also allow to
specify the versions for expat/ncurses rather than have them hardcoded
in 300-gdb.sh - but would appreciate feedback.
Signed-off-by: Alexey Neyman <stilor@att.net>
Error message:
[EXTRA] Preparing working directories
[ERROR] Missing: 'i586-mingw32msvc-ar' or 'i586-mingw32msvc-ar' or 'ar': either needed!
Signed-off-by: Alexey Neyman <stilor@att.net>
The issue with this sample is that the sh4-* targets in GCC do not
implement __builtin_trap() function. Starting with release 5.1,
GCC inserts abort() calls where NULL pointers are dereferenced. The
elf/dl-conflict.c in glibc is one such place: it calls elf_machine_rela
with NULL `sym' pointer. This causes an undefined `abort' symbol to
appear in the object file and as a result, pulls in some files during
the linking of the dynamic loader that are not supposed to. Eventually,
it results in link error due to multiple definitions of _itoa and some
other symbols.
The right fix would be to implement __builtin_trap() for sh4 in GCC.
A workaround would be adding -fno-delete-null-pointer-checks to
CFLAGS-dl-conflict.c in elf/Makefile. Until either of these happens,
though, pin the GCC version to 4.9.3 - the last that did not generate
`abort' calls. Note that the version where GCC started to generate
`abort' calls is apparently different for different architectures;
the issue in [1] was reported against GCC 4.9.
References:
[1] https://www.sourceware.org/ml/libc-alpha/2014-10/msg00807.html
(similar issue on HP-PA which was resolved by implementing
__builtin_trap)
Options were renamed. However, matching current option names result
in a compile error for strfmon_l.o in glibc: GCC 4.6 detects an
unitialized variable in its own va_arg() implementation. Likely,
an older GLIBC was used when this sample was submitted - which did
not provide -Werror in CFLAGS.
Thus, use most recent GCC (5.2.0) and revert GLIBC_FORCE_UNWIND to
its default value, 'y' (as forced unwind is required with this version).
- Incompatible ISL/CLooG were requested by config after newer releases
of both were brought in.
- Consistency with other samples: save tarballs (which will avoid
downloading them each time from Travis), extra logging.
This should ideally be upstreamed to uclibc maintainers, but with the
last release more than 3 years ago, I wouldn't hold my breath for a
fix being released any time soon.
As of right now, ltrace fails to build. To get CI happy, lets just
disable it!
When we fix ltrace, just revert this change.
This is also in reference to bug #115
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
.. and set CT_TARGET_VENDOR to w64. Otherwise config.gcc doesn't
pickup the right files for include_next (and probably many other
things go wrong too).
w64 has been the correct vendor for absolutely ages now on all
distributions that provide MinGW-w64 cross compilers.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
C++ support is enabled in most samples existing in crosstool-ng and is also
supported by AVR.
As pointed out in pull request #124 in the crosstool-ng github, Arduino based
projects willing to use this toolchain will require C++ support.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
The avr-libc manual and most distributions build the AVR 8-bit gcc
toolchain with the "avr" (non-canonical) target.
Some experimentation also led to the conclusion that other (canonical)
targets are not very well supported, so we force the "avr" target for
crosstool-ng as well.
Some patches are required in avr-libc for a toolchain with gcc 5.x to
work. These patches are still not part of any avr-libc release version,
so the config sample currently forces 4.9.x to avoid requiring to clone
avr-libc trunk.
References:
https://savannah.nongnu.org/bugs/?44574https://gcc.gnu.org/gcc-5/changes.html
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
As posted on http://www.eglibc.org/
====================
EGLIBC is no longer developed and such goals are now being addressed
directly in GLIBC.
====================
I'm not interested in maintaining build support for unsupported
software.
Older branches of crosstool-ng continue to have eglibc support.
If you find issues with older branches, I'm always open to pull
requests.
Removing eglibc also frees up glibc cleanup and build optimization.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Fixing this sample proved to be, well, challenging.
Mark it broken so it does not stop the release.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bryan Hundven <bryanhundven@gmail.com>
Removed the arm-davinci sample, it does not bring much more
that the other samples.
Add an ARM uClibc EABIhf sample.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Use a more coherent naming for the options. This will help commonalise
the native case (e.g. NPTL on Linux, win32 on Windows), and add alternate
implementations (e.g. musl.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bryan Hundven <bryanhundven@gmail.com>
This configuration has been tested on an Atmel sama5d3 board. It is a Cortex-A5
without neon and the floating point unit is a vfpv4-d16.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This commit updates the arm-unknown-linux-uclibcgnueabi sample to the
modern age:
- gcc is bumped from 4.4.3 to 4.8.2
- binutils is bumped from 2.19 to 2.24
- gdb is bumped from 7.1 to 7.7
- uclibc is bumped from 0.9.30 to 0.9.33
- kernel headers are bumped to 3.10
- strace is bumped to 4.8
- all companion libraries are also updated
In addition, the ARCH_CPU/ARCH_TUNE configuration options are changed
from xscale to arm926ej-s, with the reasoning that in the ARMv5
ecosystem, ARM926EJ-S cores are much, much more widely used than
Xscale cores.
The resulting toolchain was tested by building a Busybox-only system
with Buildroot, and testing it under an ARMv5 Qemu emulation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In make-3.8x, the $(wildacrd) function would sort the entries,
while in make-4.x, it would just return the entries in any
unpredictable order [*]
Use the $(sort) function to get reproducible behaviour.
[*] Well, most probably the roder the entries appear when read
from readdir()
Reported-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
This patch fixes the download of the avr32 headers in crosstool-ng by
fetching them directly from Atmel's web site instead of the now-broken URL
given by the original author of the avr32-header-fetching modification,
who fetched them from a copy on his own, now-defunct server.
It also adds the necessary logic to extract from a zip file, as that is
how the headers are packaged.
To configure it for avr32 after launching ct-ng menuconfig in an empty
directory:
Paths and misc options ->
Shell to use as CONFIG_SHELL = sh
Target options ->
Target Architecture = avr32
Toolchain options ->
Tuple's alias = avr32
Binary utilities ->
binutils version = 2.18a
C compiler
gcc version = 4.2.2
C-library
newlib version = 1.17.0
Enable IOs on long long = yes
Enable IOs on floats and doubles = yes
Disable the syscalls supplied with newlib = yes
CONFIG_SHELL is necessary to get round the "fragment: command not
found" bug when binutils-2.18 is configured using bash.
Prepared against crosstool-ng mercurial trunk on 31 March 2012.
Signed-off-by: Martin Guy <martinwguy@gmail.com>
[yann.morin.1998@free.fr: update bundles sample accordingly]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <CAL4-wQrg_NQ7jm-NCADqeyQr9twyhtx42OUGNThP6gWeqZc=kw@mail.gmail.com>
Patchwork-Id: 232612
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@free.fr: make it a defconfig with pinned versions]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <bdf1fde968aee8d0cd95.1360063830@advdt005-ubuntu>
Patchwork-Id: 218239
Now we use defconfig files to store the samples, we have to be a bit more
conservatives in the symbols names, so as to avoid gigantic version bumps
when updating sub-level versions from a package.
Update samples accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add a ct-ng action to check if samples needs being updated.
This will be usefull when the config options change.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's been a while we've had those versions, time to unmark them being
experimental. It does not mean everything is perfect, but may gather
some more testing on those versions.
Update samples accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Replace the 32-bit-only mingw32 with mingw-w64 that is capable
of building toolchains for both 32-bit and 64-bit Windows.
kernel/mingw: replace mingw32 with generic Windows
kernel/windows: New windows kernel supporting 32 and 64 bit arch
libc/mingw: Remove old options
patches: Remove old mingw libc options' patches
Signed-off-by: "Yann Diorcet" <diorcet.yann@gmail.com>
[yann.morin.1998@free.fr: array var in libc/mingw.sh, typos]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <b045ac08fc9eac2e5ee3.1352898499@blackmint>
Patchwork-Id: 198901
Refresh all samples against the new set of options, to be
sure they all build OK, before we can do the release.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since we use defconfigs to save the samples, listing all the
samples can no longer be done by passing all the sample names
at one to the script; we need to pass them one-by-one after
we expand the sample's defconfig ibnto a complete .config.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that we are using defconfig files, the samples do not contain
the full configuration, so we can not simply parse them to show
their content.
Instead, we must fake recalling a sample, and parse the generated
.config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When saving a sample, use savedefconfig instead of copying
the full .config file.
This reduces the saved .config, and reduces clutter when it
is later upgraded.
Also use defconfig when retrieving a sample.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
No feature- of version-bump, just update the samples
so that no (NEW) option pops up in the release.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Update all samples to reflect the new set of options, plus:
- remove the arm-iphone-linux-gnueabi sample (obsolete...)
- disable hard-float in ARM bare-metal samples.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's been a while now that crosstool-NG has been hosted on it's own
website, and not at my home. Change every reference to the old site
to the new one, everywhere is makes sense to.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Update all the samples, so that there is not config-prompt when
recalling samples. This is no upgrade, it's just about having
new options set (y or n) in the samples.
Also, get rid of the armeb-test_nptl-linux-uclibcgnueabi, it's no
longer needed, there's a non-test sample with uClibc NPTL, now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
[yann.morin.1998@anciens.enib.fr: add pointer to ML thread]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
As the mirror is always tried first, and the default is my server,
it means every download will first hit my server. As I do not have
much mirrored there, it means a lot of time is lost.
Disable use of the mirror for all samples, except the one that does
need it for the uClibc snapshot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Sample provided by Ioannis E. VENETIS
Reported-by: "Ioannis E. Venetis" <venetis@mail.capsl.udel.edu>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
