- libpthread requires iteration over multilibs, unlike the core, it
does not detect and build multilibs by itself.
- Disable parallel builds for mingw-w64 components; until mingw-w64 core
builds clean, I am not trusting it.
- Make the list of tools to build configurable
- Turn on multilib in x86_64 sample.
- Make warnings about tuple less redundant. As in, "one WARN is enough,
no need to shout it three times".
- Messages about various steps/substeps are more aligned with the rest
of the components.
- Use 'make' instead of ${make} to invoke the companion make just built,
if applicable.
Signed-off-by: Alexey Neyman <stilor@att.net>
... when determining if it can be linked statically, and if Python
scripting should default to y.
Prompted by a failure of i686-w64-mingw32,nios2-spico-elf sample
on a system where configure didn't report static linking support.
Signed-off-by: Alexey Neyman <stilor@att.net>
It is only used if this libc flavor uses a multilib iterator (and not
determines the multilibs itself). This class currently includes glibc,
uClibc, musl - but they explicitly select CC_CORE_PASSES_NEEDED anyway.
Signed-off-by: Alexey Neyman <stilor@att.net>
... enabled by default for multilib and disabled otherwise. Buildroot
has been complaining about /etc/ld.so.conf presence for almost a year
now and I missed that.
After the release, xldd will be modified to query the compiler for
the list of multilibs to search. This would be too invasive change
before 1.23, though.
Note that it may lead to configurations where xldd currently does not
find the libraries (if both DEMULTILIB and CREATE_LDSO_CONF are turned
off). This is not the default setting in Kconfig, though.
Signed-off-by: Alexey Neyman <stilor@att.net>
It turns out buildroot does not currently accept a toolchain where a dynamic
linker does not reside in the multi-os-directory. Unfortunately this is
how glibc installs itself on AArch64 without any extra tricks.
So, provide an option to force everything into /lib or /usr/lib; patch to
buildroot will be worked on separately.
Signed-off-by: Alexey Neyman <stilor@att.net>
Same as the base release as long as they applied.
MUSL patches didn't, removed.
Also, unobsolete Linaro GCC5 now that they rolled out a new release.
Signed-off-by: Alexey Neyman <stilor@att.net>
Some software starts to adopt xz-only distribution (strace,
gcc-linaro, ...). Better that than deal with cryptic errors like
"cannot find strace-.tar.bz2".
Signed-off-by: Alexey Neyman <stilor@att.net>
Adding new tristate configuration for TLS (Thread Local Storage) to
add "--enable-tls" (y), "--disable-tls" (n) or nothing (m).
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
Loading a dynamic library (LTO plugin) from a static binary fails
on ArchLinux. It is also prone to break if a system is ever upgraded.
Also, disable plugins if not enabled explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
... when building native GDB/gdbserver.
Suggested by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
Hence, it is better to enforce via config rules: elf2flt does not
play nice with ld wrapper, when both ld.bfd and ld.gold are present.
Limit the choices to just 'ld.bfd' for flat-format architectures.
Signed-off-by: Alexey Neyman <stilor@att.net>
Add patches for versions that didn't have them - patches updated/retired
as necessary.
Also, disallow 2.12.2 for architectures in ports - this version did not have
ports addon.
Signed-off-by: Alexey Neyman <stilor@att.net>
This partially reverts commit 88e8852ccd.
Bring back releases 2.12 and newer of glibc, along with the associated
Kconfig machinery. Simplify it slightly.
... these are apparently not needed with the current kconfig and only
result in warnings like "SYMBOL changed state" and "reassigning SYMBOL".
Perhaps, it was necessary to run kconfig without first generating
config.gen? But now all the targets that invoke $(CONF) have
`config_files` as a dependency.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Allow user to specify configure arguments to pass through to host/target
ncurses.
- Checkbox for --disable-database
- String option for --with-fallbacks
Signed-off-by: Alexey Neyman <stilor@att.net>
It has not seen any new commits since July 2015, and haven't had any
releases since May 2012.
The only two architectures marked as supported by uClibc but not by
uClibc-ng are v850 and i960. Both are marked as "BROKEN" in the most
recent release of uClibc, 0.9.33.2.
RIP, uClibc.
Signed-off-by: Alexey Neyman <stilor@att.net>
Also, do not select gdbserver for cross-gdb automatically, or it may
be selected even without meeting the dependencies (if C++ is not enabled)
Signed-off-by: Alexey Neyman <stilor@att.net>
This serves two purposes:
- installs its manpage
- installs headers, without them it does not make sense to install a
static library
Unfortunately, there's no way to select shared-only build of DUMA.
Hence, disable selection for static library.
Also, allow user to select whether to use stock or ct-ng's wrapper.
Signed-off-by: Alexey Neyman <stilor@att.net>
Rather than requiring them of a certain version, detect if they are present
(and have sufficient version) and select an appropriate companion tool
otherwise. The reason is that, for example, most recent gettext requires
automake 1.15, but the newest available CentOS has 1.13. Hence, the option
to "upgrade your system" does not apply, and the warning comment above
the companion tools is rather scary.
With this approach, it will work out of the box - either by using the host's
tools, or by building them as needed. Note that the user can still change
the setting in the config.
While there, propagate the new version checking macro to awk/bash/host binutils,
and switch from --with-foo=xxx to officially blessed FOO=xxx: the latter
does not require checking for bogus values (i.e., --with-foo, --without-foo)
and AC_PROG_* macros recognize the corresponding settings without further
modifications. For now, I kept --with-foo=, if only to complain and steer
people to the new way. To be cleaned up after a release.
Signed-off-by: Alexey Neyman <stilor@att.net>
So that uClibc config can be matched to Buildroot's expectations via
the menu, without the need for a saved config.
Signed-off-by: Alexey Neyman <stilor@att.net>
There are some useful tools such as widl, gendef, genidl ... etc.
provided by mingw-w64 and do not waste the developers' works.
Signed-off-by: Li-Hang Lin <lihang.lin@gmail.com>
For that, make CT_BUILD_TOP_DIR a non-settable config option (so that it is
recursively expanded with CT_HOST/CT_TARGET). Use a common prefix, with
same default as for regular sample build.
Use showConfig.sh to determine host toolchain path (for canadian crosses)
and build directory to be removed.
Remove LIBC_SYSROOT_ARG (unused).
Signed-off-by: Alexey Neyman <stilor@att.net>
Makes them sorted out by host, and removes the need for similar hack in
samples.mk.
Change how canadian crosses are named: using `=' character resulted in
Glibc build failure.
Move loading config into a common function, CT_LoadConfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
Also, move 'devel' to the bottom - we don't want this ever-moving tag
to be default in the released product.
Signed-off-by: Alexey Neyman <stilor@att.net>
Linaro GDB 7.2 no longer available from Linaro's website; removed.
Linaro GDB 7.5 had incorrect version (the tarball on linaro.org does
not have a -1 patch level).
Add/update latest versions on each (otherwise supported) branches of
GCC, GDB, binutils, glibc.
Signed-off-by: Alexey Neyman <stilor@att.net>
GCC accepts them using the same check for "0.15 or newer", but since
they are not "officially recommended" by GCC installation guide,
mark them as experimental.
Signed-off-by: Alexey Neyman <stilor@att.net>
Source-wise, both CLooG and GCC depend on ISL, and GCC may depend on
CLooG. However, GCC may or may not require CLooG (GCC5 dropped this
dependency). Also, all GCC4.x releases build fine with any of the CLooG
releases we have.
With all that in mind, it is easier to specify ISL dependency on
particular GCC releases; and CLooG dependency (if applicable) on ISL.
Signed-off-by: Alexey Neyman <stilor@att.net>
None of the bare metal C library choices (avr-libc, newlib) support
installing into sysroot. Nor does it make any sense, since sysroot
implies a file system, which in turn implies an OS.
Make them configurable, default to y when build!=host (i.e.
canadian or cross-native) because we don't know what libraries the host
will provide. GLIBC, as previously, selects them explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
- No new releases in almost 10 year.
- No public bug tracker or VCS.
- No responses from maintainer over sent patches.
RIP, dmalloc.
Signed-off-by: Alexey Neyman <stilor@att.net>
This is workaround, as more packages require similar tweaks (some
depend on X_Y_Z_or_later config variables either in kconfig, or in
the build scripts.
We should have a CT_CompareVersion, that will apply the default
or per-package method of comparison.
Signed-off-by: Alexey Neyman <stilor@att.net>
In case of bare metal, newlib is built without any syscalls,
and dmalloc fails to link with undefined references to _exit,
fstat, open, sbrk and so on.
Same for DUMA: depends on <memory.h>, not available with newlib.
Signed-off-by: Alexey Neyman <stilor@att.net>
To build uClibc correctly we need correct endianness selected in the
crosstool-NG. Xtensa cores may be little- or big-endian, but this
property is static. The toolchain knows the core endianness and doesn't
need options to select it.
Enable ARCH_SUPPORTS_BOTH_ENDIAN and select LE by default. Specify empty
CT_ARCH_ENDIAN_CFLAG so that -m{big,little}-endian don't get added to
the TARGET_CFLAGS, as it's not supported by gcc. Specify empty
CT_ARCH_ENDIAN_LDFLAG so that -EB/-EL don't get added to the
TARGET_LDFLAGS as they are ignored. Select big-endian in the example
xtensa-unknown-linux-uclibc configuration.
This fixes uClibc toolchain build for little-endian cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Allow selection of make/m4/... version. Support imports of new versions
via addToolVersion.sh. Import newest versions of the companion tools.
One non-trivial change is the handling of make versions. Existing code
was not handling make companion tool as described (see the previous
commit). However, since most modern systems have make 4.x, that previous
commit made crosstool-ng always build make as a companion tool.
This traces back to the commit dd15c93 from 2014. That commit's log message
says that actually it was 3.81 which broke the build for certain component
(it was originally breaking eglibc, but I noticed it was breaking current
glibc on powerpc64), and introduced an option to force using 3.81 by
"components that really need it". It looks like in 2.5 years we haven't
seen any such components that really need make 3.81, and (given that make
has already had a few releases since 3.81) we're unlikely to see them
in the future.
Hence, the configure check is changed from "exactly 3.81" to "3.81 or newer".
In its current form, configure will accept make 3.80+, and will not require
make as a companion tool for 3.81+. We might want to bump the latter check
to even newer version given the claim from dd15c93. Killed
COMP_TOOLS_make_3_81_NEEDED.
Anyway, I retained 3.81 just in case; ditto for m4 1.14.3, autoconf 2.65
and automake 1.11.1.
Signed-off-by: Alexey Neyman <stilor@att.net>
1.0.18 changed the dependencies for the static libraries, notably
in libc/Makefile.in. This resulted in packing a lot of unrelated
stuff into libc.a, including (sic!) a nested .a library and stuff
from other libraries such as libdl. This results in a failure to
statically link with thus created libc.a:
.../libc.a(libdl.os):(.literal+0x74): undefined reference to `_dl_tlsdesc_return'
This was breaking xtensa-*-uclibc sample.
Signed-off-by: Alexey Neyman <stilor@att.net>
1.0.15 only kept a single LINUXTHREADS option, and renamed it, making it
no longer option-compatible with uClibc.
The option for "1.0.14 or later" version of uClibc-ng is not currently
used; rename it to "1.0.15 or later" and use it to handle newer
uClibc-ng's linuxthreads.
m68k happens to be the only sample using linuxthreads.
Signed-off-by: Alexey Neyman <stilor@att.net>
In preparation for multilib support, use the same "backend" model that
is already employed by glibc and musl.
Also, the verbosity setting descriptions were swapped. V=2 is actually
less verbose than V=1: V=1 prints full commands, while V=2 prints 'CC
<file> <defines>'.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Dump CT_LIBC_EXTRA_CC_ARGS: instead, treat CT_LIBC_EXTRA_CFLAGS as
arguments to CC (or they are not applied to .S, for example).
Combine them with multi_flags and CT_TARGET_CFLAGS in proper order.
- Analyze thus combined flags to determine --with-fp/--without-fp.
Don't need to check CT_ARCH_FLOAT - it is reflected in
CT_TARGET_CFLAGS anyway. Check more soft/hard float options defined
on different architectures.
- Drop checking for endianness flags: they are not reflected in
configure arguments in any way, and they're already present in CFLAGS
(either via multi_flags or via CT_TARGET_CFLAGS). Besides,
CT_ARCH_ENDIAN_OPT was actually called CT_ARCH_ENDIAN_CFLAG, so this
was a no-op anyway.
Signed-off-by: Alexey Neyman <stilor@att.net>
On some arches (e.g. MIPS) the options like -mabi do not work if
specified more than once (see the comment in 100-gcc.sh). Therefore,
we need to determine which of the options produced by <arch>.sh can
be passed to multilib builds and which must be removed (i.e., which
options vary among the multilibs).
This presents a chicken-and-egg problem. GCC developers, in their
infinite wisdom, do not allow arbitrary multilib specification to be
supplied to GCC's configure. Instead, the target (and sometimes some
extra options) determine the set of multilibs - which may include
different CPUs, different ABIs, different endianness, different FPUs,
different floating-point ABIs, ... That is, we don't know which parts
vary until we build GCC and ask it.
So, the solution implemented here is:
- For multilib builds, start with empty CT_ARCH_TARGET_CFLAGS/LDFLAGS.
- For multilib builds, require core pass 1. Pass 1 does not build any
target binaries, so at that point, our target options have not been
used yet.
- Provide an API to modify the environment variables for the steps that
follow the current one.
- As a part of multilib-related housekeeping, determine the variable
part of multilibs and filter out these options; pass the rest into
CT_TARGET_CFLAGS/LDFLAGS.
This still does not handle extra dependencies between GCC options (like
-ma implying -mcpu=X -mtune=Y, etc.) but I feel that would complicate
matters too much. Let's leave this until there's a compelling case for
it.
Also, query GCC's sysroot suffix for targets that use it (SuperH,
for example) - the default multilib may not work if the command line
specifies the default option explicitly (%sysroot_suffix_spec is not
aware of multilib defaults).
Signed-off-by: Alexey Neyman <stilor@att.net>
Written by Bryan Hundven.
Modified by Alexey Neyman to actually add the option to gcc.in.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
Now that libc backend installs the libraries into the directory reported
by gcc as 'multi-os-directory', sh4 libraries are installed into a '!m4'
subdirectory. This directory then confuses GNU ld, which assumes the
exclamation mark to be a word separator and attempts to link to
'/usr/lib' (a directory). However, if multilib is enabled, the default
libraries are installed into the [expected] '/usr/lib/./'. This looks
like an artifact of SuperH's unique way of specifying the multilibs to
be built in GCC (which may list exclusions, starting with '!').
Signed-off-by: Alexey Neyman <stilor@att.net>
If EXPERIMENTAL is not set, the only choice for version is the set of
released versions - currently, 1.1.14. But this only option is disabled
because it is also marked EXPERIMENTAL; this leaves no available choices
in the configuration.
Marking MUSL as experimental: it seems to have header issues which
prevent, for example, gdbserver from building. musl copied chunks of
ptrace.h code from the kernel into its own headers, which now clash with
Linux kernel headers. Manifests at least on SH4 target.
Also, musl breaks in powerpc builds: GCC balks at it with "unsupported
DEFAULT_LIBC" message. Also, 64-bit powerpc and mips are not supported.
So, until someone figures out the dependencies for musl in config/, mark
it experimental.
Signed-off-by: Alexey Neyman <stilor@att.net>
The avr-libc project has released version 2.0.0:
http://savannah.nongnu.org/forum/forum.php?forum_id=8460
Apart from changes and bugfixes, this release adds support for gcc 5,
which allows us to build gcc 5 avr toolchains and also to update our avr
sample.
avr-libc 2.0.0 has been build tested both with gcc 4.9.3 and gcc 5.3.0.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
GLIBC 2.23 dropped support for pre-v9 SPARC in pthreads. Pass host
triplet with s/sparc/sparcv9/ replacement for 2.23.
Signed-off-by: Alexey Neyman <stilor@att.net>
We now only support glibc >=2.18
This now enables us to clean up glibc support!
Also, add a comment about glibc 2.20 as the point which glibc no longer
supports not building with pthread.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Kernel revisions updated to match kernel.org.
Update includes removal of 4.2.x kernel (since it was EOL),
addition of 4.4.x kernel, and marking of 4.3.x as EOL.
Signed-off-by: Yogesh Sharma <YogeshASharma@gmail.com>
As crosstools-ng only support GCC >= 4.8 we do not need libelf for gcc. GCC dropped this dependency with 4.6.
Signed-off-by: Matthias Weisser <m.weisser.m@gmail.com>
elf2flt is now hosted on github here:
https://github.com/uclinux-dev/elf2flt
But, until arm support is upstream, we'll switch to Waldemar Brodkorb
version of elf2flt.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
I was noticing that $extra_user_env was inconsistently used in
100-gcc.sh. I don't feel comfortable having just any make flag or
environment variable passed to make from a config file. If a specific
option needs to be passed to make for gcc, then a specific kconfig
option should be added for that make flag/option/env.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Since older GCC versions have been removed, older versions of binutils
are not needed.
This commit removes these older versions.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This option allowed you to use a custom headers directory/tarball to use
in your sysroot.
Not to be confused with using a custom source, that option is the
preferred method.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
On top of making <component>_CUSTOM much more complicated to rewrite,
you couldn't depend on a requirement for all of the components to treat
custom sources the same with it around.
If you need a custom source for a component, define it in the component.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since CUSTOM_LOCATION_ROOT_DIR was removed from config/global/paths.in
in commit c499ccb, xtensa should depend only on it's
ARCH_XTENSA_CUSTOM_OVERLAY_LOCATION.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Instead of checking if thread support is enabled during the build, move
the check to kconfig-time. Since if threading support is not availble,
libgomp should not be available either.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Now that versions of gcc that required PPL are no longer supported
( >= gcc-4.5.x AND <= gcc-4.7.x )
...we no longer require PPL or CLooG/PPL.
This commit:
* Removes PPL
* Removes CLooG/PPL
* Updates the documentation
* Updates build script for CLooG and GCC
* Removes PPL and CLooG/PPL from scripts/addToolVersion.sh and
scripts/showSamples.sh
* Adds ISL to scripts/addToolVersion.sh and scripts/showSamples.sh
I know that sounds like a lot for one commit, but it was all kind of
inter-tangled.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As per #222, in crosstool-NG >= 1.23.0, we will only support:
[upstream supported gcc versions] - 1
As of this writing, these versions are:
* 5.2.0
* 4.9.3
* 4.8.5 (the -1, since development on 4.8.x is now closed)
I plan to keep 4.8.5 around because of some architectures having issues
with over-optimization or just faulty optimization in the 4.9.x and
possibly newer versions.
I also cleaned up a requirement for glibc to depend on >= gcc-4.6.x for
>= glibc-2.20, but since the lowest gcc we support after this change is
>= 4.8.5, this condition can go away.
Patches for older gcc versions are removed in the next commit.
This closes#222
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
With the upcoming release of 1.22.0, mingw-w64 is still in an
experimental state, and is not considered to be fully supported yet.
This change should be reverted after the release.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes ncurses-5.9 and adds 6.0.
I also provide the stable patch updates in patches/ncurses/6.0.
I have also added an experimental toggle for enabling the new ABI
support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
In commit c9704c6683, I forgot to bump the
version in the prompt for uClibc-ng-1.0.9.
Reported-by: Reinoud Koornstra <reinoudkoornstra@gmail.com>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The configure error mentioned in the commits that disable
--with-arch/--with-tune when --with-cpu is specified is specific to ARM
builds. For other architectures, it makes sense (hey, it even makes
sense for ARM - read 'info gcc'! - it is just a shortcoming of ARM
build, apparently).
Thus, add an arch setting ARCH_EXCLUSIVE_WITH_CPU (currently, set only
for ARM) that will trigger current behavior. Permit combinations of
--with-arch/cpu/tune for other arches.
Signed-off-by: Alexey Neyman <stilor@att.net>
Currently, builds for build and target (matching the current
implementation). Need to add building for host for canadian crosses.
TIC_PATH is removed - configure in ncurses searches $PATH, so it finds
'tic' in buildtools anyway. Arguably unneeded code for MacOS also
removed, with a FIXME comment for validation by someone using MacOS.
Signed-off-by: Alexey Neyman <stilor@att.net>
I was going to start doing some autoconf work, and noticed that
configure.in was executable. Then I noticed Makefile.in was executable.
o.O
So, I ran ```find . -type f -executable``` and found a bunch of files
that shouldn't be set executable.
This commit makes them normal files again.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The Xtensa processor architecture is a configurable, extensible,
and synthesizable 32-bit RISC processor core. Processor and SOC vendors
can select from various processor options and even create customized
instructions in addition to a base ISA to tailor the processor for
a particular application.
Because of the configurability, the build process requires one additional
step for gcc, binutils, and gdb to update the default configuration.
These configurations are packed into an 'overlay' tar image, and are
simply untarred on top of the default configuration during the build.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
.. they're needed for the RPC generation in glibc
on both Cygwin and MinGW-w64.
Neither are built on GNU/Linux and iconv is not
built on Darwin.
Two patches for gettext are needed, one so that
-O0 works and one so that static builds can be
made.
They can take a good while to build, so if not
needed for_host or for_build then they are not
built.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
I've added the .config files to contrib/uClibc-defconfigs from buildroot
to use as default configs if they are not provided in the sample.
If a particular architecture really needs an option set, it should be
either updated in the manange_uClibc_config function in
scripts/build/libc/uClibc.sh or a custom ${uclibc_name}.config should be
added to the sample (usually via `ct-ng saveconfig`).
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes blackfin support.
I'm open to re-adding blackfin after crosstool-1.23.0 is released, but
it is currently too difficult to port forward to newer versions of gcc
and uclibc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This is a weird artifact from when mips64 was first introduced to ct-ng
and was never removed from experimental.
If you have problems building a mips64 toolchain, please report on the
mailing list or on github issues.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change, as per #222, reduces the number of supported releases of
gcc to the latest branch releases.
I noticed while doing this work that gcc-4.5.4 was never added, so I
moved patches for gcc-4.5.3 to 4.5.4 and updated the
bfin-unknown-linux-uclibc example. Also, 120-siginfo.patch was fixed
upstream in the 4.5.4 release, so this patch is omitted.
I also bumped the avr sample to 4.9.3 from 4.9.2.
With the addition of gcc-5.x, the gcc release team now releases the
major.minor.0 versions, while updates to the branch are available in
svn/git. We'll address that when we get to issue #219. This change just
removes CC_GCC_5_1 and moves CC_GCC_5_2 to CC_GCC_5, and removes
CC_GCC_5_1_or_later and moves CC_GCC_5_2_or_later to CC_GCC_5_or_later.
This is the first of two part changes, as mentioned in #222.
This change is slated for release in 1.22.0. The next change will be
slated for 1.23.0, and will limit gcc versions to what is on
https://gcc.gnu.org under "Release Series and Status", which is
currently 4.9.3 and 5.2.0, although I will also support the previous
supported version. In this example that would be 4.8.5.
Last, but not least, this change also retires AVR32 support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Some older versions of configure (including the one in GMP 4.3.2)
interpret the $ECHO environment variable as the `echo' utility to
use. CT-NG sets the variable to `:' and exports it if V=0 or V=1
is supplied, breaking the samples using such configure. This currently
includes bfin-unknown-linux-uclibc and powerpc-unknown-linux-uclibc.
Also, correct the description of the V= variable - V=0 is *not* the
default; in fact, default does not correspond to any of the V=[012]
values.
Signed-off-by: Alexey Neyman <stilor@att.net>
The gold linker cannot currently be built in a static toolchain build.
This may get fixed in a future version of crosstool-NG.
Also, there is a bit of weirdness here. versions of binutils >= 2.21
have GOLD (BINUTILS_HAS_GOLD), but that doesn't mean it should be used.
For instance, if the architecture is not supported.
So with that, we create a new hidden option: BINUTILS_GOLD_SUPPORT
Which in turn depends on BINUTILS_GOLD_SUPPORTS_ARCH, BINUTILS_HAS_GOLD,
and not STATIC_TOOLCHAIN... then replace anything that previously
depended on BINUTILS_HAS_GOLD with our new BINUTILS_GOLD_SUPPORT option.
This closes#210
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
- New configurations:
- CC_GCC_TARGET_FINAL:
Use the default targets "all" and "install" for the final compiler for
bare metal.
- Adding parameter "build_step" to function do_gcc_core_backend:
do_gcc_core_backend is used for the core compiler and in case of bare metal
for the final compiler, too. To have better control over the parameters for
the final compiler "build_step" is used.
- Used for proper logging.
- Use CT_CC_GCC_CORE_EXTRA_CONFIG_ARRAY or CT_CC_GCC_EXTRA_CONFIG_ARRAY.
- If CT_CC_GCC_TARGET_FINAL is set and the final compiler is build then the
make targets for the final compiler are used ("all", "install").
Signed-off-by: Jasmin Jessich <jasmin@anw.at>
I forgot that the logs must stay small, and if they fail we'll grab the
last few hundered lines.
Note, the logs must stay smaller then 4M.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
