Some users (like myself) may want to omit the crosstool-NG version
from the binaries' versioning output, as it can be incredibly long
and not too helpful. Add a config option to disable it. The possible
combinations are as follows:
- crosstool-NG version (default)
- crosstool-NG version - custom toolchain ID
- Custom toolchain ID
- No crosstool-NG version OR custom toolchain ID
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
While here, also consider patched by anything other than "bundled patches"
as per-target sources. Add scary warnings in case of a failure.
Signed-off-by: Alexey Neyman <stilor@att.net>
... fails on DUMA because it cannot be compiled by newer C++, and patches
are not applied to checkouts from VCS.
Signed-off-by: Alexey Neyman <stilor@att.net>
Fixes#731
CT_BUILD_DIR is used in CT_DoExecLog. We need to ensure that it is
set before the first call to CT_DoExecLog.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
... when determining if it can be linked statically, and if Python
scripting should default to y.
Prompted by a failure of i686-w64-mingw32,nios2-spico-elf sample
on a system where configure didn't report static linking support.
Signed-off-by: Alexey Neyman <stilor@att.net>
(see the comments in the code for details on the issue)
Old workaround in 100-gcc.sh stopped working (probably, due to one
of GCC version upgrades), so switch to the other approach originally
described there: adjust the list of multilibs to not include the
default target explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
It's possible that "gcc" is not the compiler being used for the build,
so respect BUILD_PREFIX and BUILD_SUFFIX when finding its version.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
configure.ac now finds how to count the CPUs in a system. Currently
the getconf method and sysctl methods are supported. Adding more is
easy enough.
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
After much struggling with macos (BSD) sed and even getting everything
work in crosstool-ng itself, I had to abandon that because some
components rely on GNU syntax. Specifically, GNU libc uses '/.../{H;g}'
(note absense of the separator after 'g').
So, revert the -r/-E detection and check for sed's being of GNU origin.
MacOS people, sorry, but you'd have to install GNU sed.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and then use the right option. See the note in scripts/functions
on where we should use ${foo} and where just 'foo'; this boils down to
whether we can expect the build tools override to be in effect (e.g. in
the actual build scripts) or not (i.e. outside of scripts/build).
While running in scripts/functions, or in scripts/crosstool-NG.sh the
build tools override directory (.build/tools/bin) may have not been
set up (yet, or at all).
Also, modify the installed scripts (populate, xldd) accordingly.
Signed-off-by: Alexey Neyman <stilor@att.net>
For that, make CT_BUILD_TOP_DIR a non-settable config option (so that it is
recursively expanded with CT_HOST/CT_TARGET). Use a common prefix, with
same default as for regular sample build.
Use showConfig.sh to determine host toolchain path (for canadian crosses)
and build directory to be removed.
Remove LIBC_SYSROOT_ARG (unused).
Signed-off-by: Alexey Neyman <stilor@att.net>
Makes them sorted out by host, and removes the need for similar hack in
samples.mk.
Change how canadian crosses are named: using `=' character resulted in
Glibc build failure.
Move loading config into a common function, CT_LoadConfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
Similarly to FOR_HOST; recent change in 100-gcc.sh that switched
FOR_HOST->FOR_BUILD broke simple cross configurations on macos.
Signed-off-by: Alexey Neyman <stilor@att.net>
For a cross-compiler, we only need to make the 'build tools' for the
'build'. We also build the 'build tools' for the 'host' when building a
cross-canadian toolchain.
Closes#430
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This step was only used in uClibc. However, with upcoming multilib, the
config management will have to be done for each variant differently,
anyway.
uClibc was the only user of libc_check_config step, as well as
CT_CONFIG_DIR directory. Retire these.
Two other clean-ups in uClibc.sh:
- KERNEL_HEADERS check seems to be bogus, this config option is not
present even in 0.9.30 - which is not supported already.
- SHARED_LIB_LOADER_PREFIX was renamed to MULTILIB_DIR in 0.9.31,
according to ChangeLog - and MULTILIB_DIR is passed from command line
instead.
Signed-off-by: Alexey Neyman <stilor@att.net>
Install startfiles for libc variants into the most specific combination
(suffixed sysroot, if applicable + suffixed multi-os dir, if
applicable). Install headers once in every suffixed sysroot (although it
seems that GCC picks up headers from top-level sysroot, GCC manual
claims that sysroot suffix affects headers search path).
In uClibc, this requires a better sanitization of the directory: it
creates symlinks from {sysroot}/usr/lib/{multi_os_dir} to
{sysroot}/lib/{multi_os_dir} and to do so, it counts the number of path
components in the libdir. This breaks if one of such components is `..'
- symlinks contain an extra `../..' then. Since such sanitization had to
be implemented anyway, use it in other places to print more sensible
directory names.
Also, fix the description of configure --host/--target per musl's
configure help message (and its actual code).
Signed-off-by: Alexey Neyman <stilor@att.net>
On some arches (e.g. MIPS) the options like -mabi do not work if
specified more than once (see the comment in 100-gcc.sh). Therefore,
we need to determine which of the options produced by <arch>.sh can
be passed to multilib builds and which must be removed (i.e., which
options vary among the multilibs).
This presents a chicken-and-egg problem. GCC developers, in their
infinite wisdom, do not allow arbitrary multilib specification to be
supplied to GCC's configure. Instead, the target (and sometimes some
extra options) determine the set of multilibs - which may include
different CPUs, different ABIs, different endianness, different FPUs,
different floating-point ABIs, ... That is, we don't know which parts
vary until we build GCC and ask it.
So, the solution implemented here is:
- For multilib builds, start with empty CT_ARCH_TARGET_CFLAGS/LDFLAGS.
- For multilib builds, require core pass 1. Pass 1 does not build any
target binaries, so at that point, our target options have not been
used yet.
- Provide an API to modify the environment variables for the steps that
follow the current one.
- As a part of multilib-related housekeeping, determine the variable
part of multilibs and filter out these options; pass the rest into
CT_TARGET_CFLAGS/LDFLAGS.
This still does not handle extra dependencies between GCC options (like
-ma implying -mcpu=X -mtune=Y, etc.) but I feel that would complicate
matters too much. Let's leave this until there's a compelling case for
it.
Also, query GCC's sysroot suffix for targets that use it (SuperH,
for example) - the default multilib may not work if the command line
specifies the default option explicitly (%sysroot_suffix_spec is not
aware of multilib defaults).
Signed-off-by: Alexey Neyman <stilor@att.net>
For 4 different folders:
${CT_PREFIX_DIR}
${CT_SYSROOT_DIR}
${CT_SYSROOT_DIR}/usr
${CT_PREFIX_DIR}/${CT_TARGET}
.. symlinks from 'lib32' and 'lib64' to 'lib' were created.
This was untidy and incorrect for multilib (the bitness of
the libraries in 'lib32' and 'lib64' will not be the same)
We can not know which folders this toolchain configuration
will require at this time so let them be created on-demand
instead.
Changed by Alexey Neyman: original change removed too much; we
still need to create the default directories because the os
directories are based off them (e.g. `lib/../lib64').
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
GDB's configure mishandles the libexpat.{so,a} libraries when it is
given -static in CFLAGS AND --with-libexpat-prefix in configure's args:
it checks for <prefix>/lib/libexpat.so and finding that, attempts to
link it as `gcc -static .. conftest.c <prefix>/lib/libexpat.so`; this
obviously fails (.so cannot be statically linked), so configure assumes
libexpat is unusable. Thus, --with-libexpat-prefix is dangerous and
should be avoided; instead, configure should find the libraries via the
supplied CC/LD definitions.
If CPATH, C_INCLUDE_PATH, CPLUS_INCLUDE_PATH, or OBJC_INCLUDE_PATH are set, bail out.
These environment variables are known to break crosstool-ng's build.
This closes#327
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
We check for apps:
* make
* sed
* grep
* awk
* libtool/libtoolize
* install
* patch
* and more
...during configure. Our scripts should be consistent about using the
variables that define where the found tool was found.
Of course, we do hard-link these tools in buildtools, but that should be
a backup for the components we are building. Our scripts should always
use the tools we find.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Provides a simpler alternative to editing config to enable
CT_ONLY_DOWNLOAD, doing ct-ng build and then restoring .config.
Signed-off-by: Alexey Neyman <stilor@att.net>
This change updates the CC.* references to CC_GCC.* in the internal
scripts.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
This commit moves gcc.sh to 100-gcc.sh to accomodate for other
cross-compilers that crosstool-ng might be able to build.
The first, to come soon, is llvm/clang.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Yann Diorcet <diorcetyann@gmail.com>
This commit changes sed, awk, and grep to use the ones we found during
configure time. This helps make the build more consistent.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
BSD grep does not interpret a null alteration. It complains about an
empty sub-expression, e.g.:
$ grep --version && grep -E '^(# |)CT_' .config
grep (BSD grep) 2.5.1-FreeBSD
grep: empty (sub)expression
This patch replaces the null alteration with a zero or once quantifier
which works with both BSD & GNU grep.
$ grep --version && grep -E '^(# )?CT_' .config
grep (BSD grep) 2.5.1-FreeBSD
CT_CONFIGURE_has_xz=y
CT_CONFIGURE_has_svn=y
...
$ ggrep --version && ggrep -E '^(# )?CT_' .config
ggrep (GNU grep) 2.20
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>.
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.
Written by Mike Haertel and others, see
<http://git.sv.gnu.org/cgit/grep.git/tree/AUTHORS>.
CT_CONFIGURE_has_xz=y
CT_CONFIGURE_has_svn=y
...
Signed-off-by: Jason T. Masker <jason@masker.net>
Tested-by: Andreas Bießmann <andreas@biessmann.de>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Byt the end of the main script, the log file is being moved and
compressed, and the final destination might become read-only at any
time, so we consign stdout/err to oblivion.
This is incorrect, as some actions after may still fail (out of space,
for example).
So, properly restore stdout/err, but also stdin (useless, but harmless)
instead, so the user has a chance to see the error, especially since it
is not logged into the log file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
