- Allow user to specify configure arguments to pass through to host/target
ncurses.
- Checkbox for --disable-database
- String option for --with-fallbacks
Signed-off-by: Alexey Neyman <stilor@att.net>
Make them configurable, default to y when build!=host (i.e.
canadian or cross-native) because we don't know what libraries the host
will provide. GLIBC, as previously, selects them explicitly.
Signed-off-by: Alexey Neyman <stilor@att.net>
This follows the trend set by 1*.sh scripts that configure ISL, GMP,
MPFR, CLooG, etc. Building with shared libraries presents all kinds
of problems:
- The shared libraries need to be installed into ${CT_PREFIX_DIR}.
- The binaries linked against companion libs need to have proper
RPATH, or they're looking for shared libs in
.build/${CT_PREFIX}/buildtools/lib.
- All libraries must agree as to whether they're built shared,
static, or both. Otherwise, gettext tries to link in static libncurses.a
into a shared library and fails (since libncurses was compiled without
the -fPIC switch and hence contains relocations that cannot be handled
in a shared library).
So this fixes the current mess. If we decide to re-enable building
the companion libs shared, we should probably make this dependent on
a separate suboption of CT_STATIC_TOOLCHAIN.
Add a config loosely based on one reported in the issue 274.
Signed-off-by: Alexey Neyman <stilor@att.net>
In that case, CT_GetCustom just creates a symlink to the original.
In that case, 'cp -a <path> .' gives an error and 'cp -a <path> <newdir>'
creates <newdir> as a symlink (which will then run the build inside
the shared directory, .build/src/<package>).
Signed-off-by: Alexey Neyman <stilor@att.net>
The referenced commit replaced 'make' with '${make}' everywhere. This is
wrong for at least the utilities that we may build as companion tools
(make, libtool): this will always invoke the version detected by configure
by supplying the absolute path. In other words, the wrappers in
.build/tools/bin are not fallbacks - they are either temporary (in case
a respective companion tool is built) or permanent redirectors.
This is the reason why the PATH= has .build/*/buildtools/bin at higher
precedence than .build/tools/bin; the latter has the versions detected by
configure and the former has the versions built as companion tools.
Revert the rest of the gang (grep/sed/...) for consistency. After all,
we may decide to supply some of them as well (awk, for instance).
Signed-off-by: Alexey Neyman <stilor@att.net>
mingw-gcc searches for include and libs in <sysroot>/mingw
directory while non-mingw-gcc uses <sysroot>/usr. This patch
sets an appropriate prefix for target companion libs.
Signed-off-by: Kirill K. Smirnov <kirill.k.smirnov@gmail.com>
If destdir was / and prefix began with /
then we would attempt to install libelf
to a path beginning with // which is a
UNC path on Cygwin. This is generally
incorrect.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
On Windows a build failure can be triggered during the
build of the static iconv if a dynamic iconv is already
present:
There's a circular dependency between libiconv and gettext
which (on a system with a dynamic gettext (and thus iconv)
installed in the system prefix) causes a failure to build
iconv.exe statically if it is built with nls ..
.. Which needs gettext
.. which depends on libiconv
.. so libtool finds a dynamically linked libgettext.la
.. and therefore presents ld with the dll import library
libiconv.dll.a when linking iconv.exe
.. as well as the static libiconv.a that it has just built!
.. leading to multiply defined symbols from iconv.
Therefore, we build it without nls. If it later turns out
that we need it to be built with nls, then I will have to
build it in two passes (common practice when bootstrapping
GNU/Linux distros, MSYS2 and probably Cygwin and Homebrew).
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Build shared builds for host unless CT_STATIC_TOOLCHAIN.
In all other situations, build statically, as before.
It is necessary that the static/shared-ness of expat matches
that of gettext on Cygwin/MinGW-w64 as they can't be linked
together if they don't match, so we follow the same logic.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Now that versions of gcc that required PPL are no longer supported
( >= gcc-4.5.x AND <= gcc-4.7.x )
...we no longer require PPL or CLooG/PPL.
This commit:
* Removes PPL
* Removes CLooG/PPL
* Updates the documentation
* Updates build script for CLooG and GCC
* Removes PPL and CLooG/PPL from scripts/addToolVersion.sh and
scripts/showSamples.sh
* Adds ISL to scripts/addToolVersion.sh and scripts/showSamples.sh
I know that sounds like a lot for one commit, but it was all kind of
inter-tangled.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
We check for apps:
* make
* sed
* grep
* awk
* libtool/libtoolize
* install
* patch
* and more
...during configure. Our scripts should be consistent about using the
variables that define where the found tool was found.
Of course, we do hard-link these tools in buildtools, but that should be
a backup for the components we are building. Our scripts should always
use the tools we find.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit removes ncurses-5.9 and adds 6.0.
I also provide the stable patch updates in patches/ncurses/6.0.
I have also added an experimental toggle for enabling the new ABI
support.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Currently, builds for build and target (matching the current
implementation). Need to add building for host for canadian crosses.
TIC_PATH is removed - configure in ncurses searches $PATH, so it finds
'tic' in buildtools anyway. Arguably unneeded code for MacOS also
removed, with a FIXME comment for validation by someone using MacOS.
Signed-off-by: Alexey Neyman <stilor@att.net>
Currently, only libelf has a for-target step - but it generalizes
the step to hook other libraries into this step.
Signed-off-by: Alexey Neyman <stilor@att.net>
.. they're needed for the RPC generation in glibc
on both Cygwin and MinGW-w64.
Neither are built on GNU/Linux and iconv is not
built on Darwin.
Two patches for gettext are needed, one so that
-O0 works and one so that static builds can be
made.
They can take a good while to build, so if not
needed for_host or for_build then they are not
built.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
mpfr.org has been less then reliable, so lets make gnu.org the primary
instead of the secondary source.
This closes#250
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This change updates the download locations to default to the official
download site.
For gcc and gdb, also separate out the linaro download locations so that
if you are downloading the linaro variant, it skips trying to download
from the official gcc mirror.
This commit closes#3
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add well-known HTTP mirror as a fallback. This lets crosstool-ng
work when behind a HTTP/HTTPS only proxy.
Signed-off-by: Michael Hope <michaelh@juju.net.nz>
[me: split original patch in two]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <aeb4a850d0786ee62dc2.1375559989@wanda>
Patchwork-Id: 264436
CLooG 0.18+ will use ISL instead of PPL, so we have to configure
adequately depending of which backend is in use.
The Kconfig entries will decide for us which is selected, so we
can rely on either PPL xor ISL to be selected, not both.
Reported-by: "Plotnikov Dmitry" <leitz@ispras.ru>
[Dmitry did a preliminray patch to add ISL support,
which this patch is inspired from]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
ISL is used by gcc-4.8 onward for GRAPHITE, so is also used as
backend for CLooG 0.18.0 onward.
Reported-by: "Plotnikov Dmitry" <leitz@ispras.ru>
[Dmitry did a preliminray patch to add ISL, which this one is inspired from]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
-fpermissive is not a valid option to gcc.
Adding it to the CFLAGS make the ppl checks fail with the following
error:
[ALL ] Making check in tests
[ALL ] cc1: warnings being treated as errors
[ERROR] cc1: error: command line option "-fpermissive" is valid for C++/ObjC++ but not for C
[ALL ] cc1: warnings being treated as errors
[ERROR] cc1: error: command line option "-fpermissive" is valid for C++/ObjC++ but not for C
[ERROR] make[7]: *** [formatted_output.o] Error 1
Signed-off-by: "Samuel Martin" <smartin@aldebaran-robotics.com>
Message-Id: <bba2482a06a11415207e.1365876457@smartin-de-2.aldebaran.lan>
Patchwork-Id: 236383
ppl-0.10.x does not build with gcc-4.6+, as it uses constructs that were
warnings with gcc-4.5 and before, but are now errors with gcc-4.6 and
above.
Fix that by passing -fpermissive in CFLAGS for ppl 0.10.
Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
On some hosts, and for certain toolchains (eg. toolchain targetting
the upcoming Darwin), it may be necessary to pass arbitrary CFLAGS
and/or LDFLAGS when building the components.
And necessary infrastructure:
- EXTRA_{CFLAGS,LDFLAGS}_FOR_{BUILD,HOST} as config options
- pass those extra flags to components
Fix-up a slight typo in elf2flt at the same time (misnamed cflags).
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <d24043276c9243a35421.1353077450@macbook-smorlat.local>
Patchwork-Id: 199645
Use the same method as companion tools for providing generic and
extendable companion libs.
Signed-off-by: Yann Diorcet <diorcet.yann@gmail.com>
Message-Id: <515c5c4635d99ebe4877.1353074410@macbook-smorlat.local>
Patchwork-Id: 199613
Because we now patch configure.in and configure, the Makefile quicks
in a re-build rule as the source files are now more recent than the
bundled generated files, and that fails because the m4 directory
is missing, although on some systems where aclocal is not installed,
the re-build rule does nothing (except a warning).
Always create tht directory.
Reported-by: Per Arnold Blaasmo <per-arnold.blaasmo@atmel.com>
[Also thanks to Thomas De Schampheleire <patrickdepinguin@gmail.com>
for some digging works on this issue]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
It's easier to have as much as possible stuff in the same place to
ease backup/restore, and make things easier to follow.
Move the host companion libraries install dir as a sub-dir of the
build-tools install dir (but not directly in it, it would break
for canadian or cross-native).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In canadian-cross, we need the companion libraries running on the
build machine, to be able to build the two core gcc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Move the actual complibs codes to backend functions that builds the
required combo of build/host/target as requested by a frontend.
This split is currently a no-op, but is required for the upcoming
canadian-cross rework, where we'll be needing to build the complibs
twice, one for build/build, and one for build/host.
This applies to the six companion libraries:
- GMP
- MPFR
- PPL
- Cloog/PPL
- MPC
- libelf
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In Ubuntu 11.04 and 11.10, the default options for ld have changed.
--no-copy-dt-needed-entries and --as-needed are now enabled by default, which
causes errors like:
[EXTRA] Checking CLooG/ppl
[DEBUG] ==> Executing: 'make' '-j3' '-s' 'check'
[ALL ] Making check in .
[ALL ] config.status: creating include/cloog/cloog-config.h
[ALL ] config.status: include/cloog/cloog-config.h is unchanged
[ALL ] libtool: link: i686-build_pc-linux-gnu-gcc -Wall -fomit-frame-pointer
-pipe -o cloog cloog.o -L/<snip>/build/static/lib ./.libs/libcloog.a -lm
/<snip>/build/static/lib/libppl_c.a /<snip>/build/static/lib/libpwl.a
/<snip>/build/static/lib/libppl.a /<snip>/build/static/lib/libgmpxx.a
/<snip>/build/static/lib/libgmp.a -lstdc++
[ALL ] /usr/bin/ld: /<snip>/build/static/lib/libppl.a(MIP_Problem.o):
undefined reference to symbol 'sqrt@@GLIBC_2.0'
[ALL ] /usr/bin/ld: note: 'sqrt@@GLIBC_2.0' is defined in DSO
/usr/lib/gcc/i686-linux-gnu/4.6.1/../../../i386-linux-gnu/libm.so so try adding
it to the linker command line
[ALL ] /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../i386-linux-gnu/libm.so:
could not read symbols: Invalid operation
[ALL ] collect2: ld returned 1 exit status
[ERROR] make[2]: *** [cloog] Error 1
[ERROR] make[1]: *** [check-recursive] Error 1
See:
https://wiki.ubuntu.com/NattyNarwhal/ToolchainTransition
This patch fixes these errors by placing '-lm' at the right place on the command
line as libppl requires libm when linking cloog.
Signed-off-by: "Benoît Thébaudeau" <benoit.thebaudeau@advansee.com>
In the early days, cloog-ppl was bizarrely packaged: the first tarball
did not contain the version in the name of the extracted directory, so
we had to play tricks.
Nowadays, however, the first component of the path are stripped when
extracting a tarball, which means that the created directory will
always be properly named. So, our old tricks do no longer work, and
worse, they break the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
By default, PPL wants to build interfaces for any of a variety of
langauges it finds on the local host (python, java, possibly perl, also
more esoteric languages such as ocaml and prolog).
These extra interfaces can double the compile time for the library. For
single-process builds, I found a savings of more than 40%:
default / j1: 716s total, 143.2s avg, 0.52s stdev
just_c / j1: 406s total, 81.2s avg, 0.33s stdev
just_c_cpp / j1: 413s total, 82.6s avg, 0.22s stdev
And for multi-process builds, it approached 50%:
default / j4: 625s total, 125.0s avg, 0.57s stdev
just_c / j4: 338s total, 67.6s avg, 1.25s stdev
just_c_cpp / j4: 327s total, 65.4s avg, 0.36s stdev
Since the PPL we build within ct-ng is only used by GCC, we only need to
build the C and C++ interfaces.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
PPL does not use the "--enable-cxx" configure switch at all; it's
possibly a cut-and-paste leftover from 'gmp.sh'. (PPL is written in C++
natively, so it doesn't make much sense to have to enable C++; GMP, on
the other hand, is written in C with an optional C++ wrapper.)
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
'configure' for PPL 0.11 (and later) needs "--with-gmp-prefix" to
provide the location of the GMP toolkit; the previous switches were
"--with-libgmp-prefix" and "--with-libgmpxx-prefix".
The upstream log message is:
commit 08dfb6fea094f8c5a533575a3ea2095edce99a6d
Author: Roberto Bagnara <bagnara@cs.unipr.it>
Date: Sun Jul 12 21:39:46 2009 +0200
New configure option --with-gmp-prefix supersedes the (now removed)
options --with-libgmp-prefix and --with-libgmpxx-prefix.
Link: http://www.cs.unipr.it/git/gitweb.cgi?p=ppl/ppl.git;a=commit;h=08dfb6fea094f8c5a533575a3ea2095edce99a6d
Since PPL's 'configure' ignores unknown switches, we use all three so we
don't have to conditionalize the ppl.sh build script itself.
Signed-Off-By: Anthony Foiani <anthony.foiani@gmail.com>
Managing the shared version of the companion libraries
has become cumbersome.
Also, it will one day be possible to use the companion
libraries from the host distribution, and then we will
be able to easily use either shared or static libs.
As a side note, while working on the canadian-rework
series, it has become quite more complex to properly
handle shared companion libraries, as they need to be
built both for the build and gost systems. That's not
easy to handle. At all.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The reunification of the glibc/eglibc code paths exposed a nasty
bug in the glibc build: use of PARALLELMFLAGS breaks the build.
See the explanations in that bug report against FC6:
https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=212111
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Latest version of CLooG does not have properly generated autoconf files,
so they need to be regenerated before the call to ./configure
Signed-off-by: "Ilya A. Volynets-Evenbakh" <ilya@total-knowlege.com>
[yann.morin.1998@anciens.enib.fr: make it conditional on 0.15.10 only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
libelf is used by gcc to build the lto-plugin used
by binutils' gold to perform LTO.
This requires that files in libelf be compiled with
-fPIC to generate a proper .so.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It appears, that the configure scripts of libelf versions 0.8.13 and
0.8.12 do not honour the --host option. The compiler must be given as an
environment variable or the process will use the command "gcc" as the
compiler.
It seems that this is already done in the function do_libelf_target in
scripts/build/companion_libs/libelf.sh, but not in function do_libelf.
This rules out 0.15.5 and previous versions, that did not
have this option, so remove them from the list. Anyway,
they were marked 'OBSOLETE', so it's not a big loss...
[Yann E. MORIN: remove obsolete versions]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
I ran into some minor difficulties looking through the build log for a
particular file: I wasn't interested in seeing it unpacked, but only
when it is built or installed. Adding these two levels allows me to
differentiate between those cases.
[Yann E. MORIN: Those are blind log levels, and are used only to search
in the build-log afterward.]
Signed-off-by: Anthony Foiani <anthony.foiani@gmail.com>
As there's no longer any user of the companion libraries on the
target, nuke the build for the target.
Well, at least, there's libelf that's still needed by ltrace, so
we keep it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
On some Fedora boxen (at least FC13), it is also required
to link with libm when static ppl is used.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In some exotic case the autoreconf step of mpfr is not executed (correctly)
leaving an incorrect version number for libtool in the configure script.
After extracting the sources files, force autoreconf to be executed.
Signed-off-by: Bart vdr. Meulen <bartvdrmeulen@gmail.com>
The companion libraries on the target are required only for internal use by
binutils and gdb. The user should not have to know about this, so hide the
option.
For CLooG/PPL 0.15.3, the directory name was simply cloog-ppl.
For any later versions, the driectory name does have the version, such as
cloog-ppl-0.15.4.
For CLooG/PPL 0.15.3, the directory name was simply cloog-ppl.
For any later versions, the driectory name does have the version, such as
cloog-ppl-0.15.4.
The tmul test uses a compiled-in input file in $(srcdir).
The problem is that the Makefile passes it unquoted. The C code
tries to stringify it using clever macros, which may *usually* work.
In my case the source directory was named:
.../toolchain-powerpc-e500v2-linux-gnuspe-1.0-2.fc10/.../tests
And guess what? During testing I found out the program fails because
it tries to open:
.../toolchain-powerpc-e500v2-1-gnuspe-1.0-2.fc10/.../tests
Yes, CPP tokenized the macro before stringifying it and not surprisingly
the 'linux' part was converted to 1.
[on Fedora-10: cpp (GCC) 4.3.2 20081105 (Red Hat 4.3.2-7)]
So the attached patch simplify the macros and pass the path as string
from the Makefile.
Once we have canadian in place, Mingw32 can be a legitimate host,
so we have to recognise that along with Cygwin.
Also fix recognising Cygwin hosts.
Signed-off-by: Bart van der Meulen <bartvdrmeulen@gmail.com>
