Computed paths may contain double slashes.
This is not an issue but it is just ugly to look at.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Depending on local policies, some users have expressed a need to
have the sysroot be named differently than the hard-coded name.
Add an option for that.
Default to 'sysroot' to match the existing literature.
While at it, replace 'sys-root' with 'sysroot' everywhere we
reference the sysroot.
Reported-by: Alexey Kuznetsov <Alexey.KUZNETSOV@youtransactor.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Final step at sharing code between glibc and eglibc.
Fall, wall of shame, fall!... :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The reunification of the glibc/eglibc code paths exposed a nasty
bug in the glibc build: use of PARALLELMFLAGS breaks the build.
See the explanations in that bug report against FC6:
https://bugzilla.redhat.com/show_bug.cgi?format=multiple&id=212111
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
glibc and eglibc each have two very similar ways of building this list.
This can, and should definitetly, be shared.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It will be possible to use that also with eglibc, so this hunk belongs to
the common code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Use the common procedure, shared between glibc and eglibc. This requires
that glibc-specific bits be included in the shared procedure.
But still build the full libc with the glibc-specific procedure. This will
be commonalised in a future commit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The build procedure for eglibc is generic enough to
be shared between glibc and eglibc. This includes:
- headers install (empty!)
- start files build
- complete libc build
- libc finish (empty!)
- add-ons list
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It is unnecessary to split C library preparation into two steps, as only
one really makes sense. So, do_libc_headers is bound to be withdrawn
short-term, in favor of do_libc_start_files.
mingw already had all its start files installation in do_libc_headers, and
do_libc_start_files was empty, just migrate the content of the former into
the latter.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It is unnecessary to split C library preparation into two steps, as only
one really makes sense. So, do_libc_headers is bound to be withdrawn
short-term, in favor of do_libc_start_files.
uClibc already had all its start files installation in do_libc_headers, and
do_libc_start_files was empty, just migrate the content of the former into
the latter.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is an obsolete version which is no longer used by any sample (the only
user, the ia64 sample, has been removed).
It also makes the code path a bit complex, with twists just to accomodate
that version. Removing the version will make those twists go away, and
will ease commonalisation of glibc and eglibc in the future (hopefully!).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ia64 is broken in every gcc/glibc combinations I tested (except for the
existing sample that used very old versions).
Nobody complained on the list about not being able to build recent versions.
So the only way forward I can see is to remove the architecture altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The location of the longterm Linux kernels on FTP has changed.
Here is a simple (but not very versatile) fix.
Signed-off-by: "Björn A. Herwig" <herwig@gdsys.de>
[yann.morin.1998@anciens.enib.fr: make it generic/versatile]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Latest version of CLooG does not have properly generated autoconf files,
so they need to be regenerated before the call to ./configure
Signed-off-by: "Ilya A. Volynets-Evenbakh" <ilya@total-knowlege.com>
[yann.morin.1998@anciens.enib.fr: make it conditional on 0.15.10 only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
ltrace 0.5.3 currently fails to build for target mips because MY_TARGET
(introduced by patches/ltrace/0.5.3/150-allow-configurable-arch.patch)
is set to 'mips' via CT_ARCH, while the mips specific stuff in ltrace
(0.5.3) is stored under sysdeps/linux-gnu/mipsel:
result: *** No rule to make target `mips/arch.h', needed by `sysdep.h'.
Stop.
The following patch fixes this issue
Signed-off-by: "Horst Kronstorfer" <horst.kronstorfer@aon.at>
[yann.morin.1998@anciens.enib.fr: reformat commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When building ecjx, the compiler for the build system must
be used, not for the compiler for the host system.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
To properly enable LTO with gold, gcc has to install a plugin that gold
uses to handle the LTO information.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When both gold and ld are installed, add a wrapper that calls
to either gold or ld.
In case the wrapper is installed, we also need to symlink ld.bfd
and ld.gold for the core_cc steps.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When configured with support for threads, gold can link in
parallel, possibly cooperating with a make jobserver.
Add an option enabling threads.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
gold is a new, optimised, multi-threaded linker with support
for plugins.
Add support for gold starting with binutils 2.21. Although 2.20
also had gold, the configure flags have changed, and supporting
2.20 would be a mess in the code.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add BINUTILS_2_21_or_later blind option. It will be used to add
conditional support for building 'gold' on versions that have it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
libelf is used by gcc to build the lto-plugin used
by binutils' gold to perform LTO.
This requires that files in libelf be compiled with
-fPIC to generate a proper .so.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In the previous patches to glibc and uclibc, we standardized on hidden
version names:
LIBC_<LIBC NAME>_V_<VERSION>
This patch updates EGLIBC to be the same for consistency to:
LIBC_EGLIBC_V_<VERSION>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Hidden version names for uClibc conflicted:
LIBC_UCLIBC_V_0_9_30_2
LIBC_V_0_9_30_1
name them constantly as:
LIBC_UCLIBC_V_<version>
Also update the build script where we use snapshots by version or snapshots by date.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
100-powerpc-private_futex.patch no longer applies to eglibc trunk.
This patch was submitted upstream in trunk.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Like rev 2002, eglibc installs some bash scripts, but use the path to the
buildtool bash as the interpreter (on the shebang line). This is only a
symlink to the real bash, and thus is not available at runtime.
Fix that by assuming that shell on the target *will* be /bin/bash.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
headers_install makes .install and ..install.cmd files.
headers_check makes .check and ..check.cmd files.
Remove these files uncoditionaly after installing (and checking) header files
into the sys-root.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[Yann E. MORIN: reformat the patch, move hunk out of headers_check conditional]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
- add 2.6.36.2.
- bump to 2.6.35.10, which is a new longterm.
- bump to 2.6.32.27 and 2.6.27.57, the two old longterms.
- update longterm descriptions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It appears, that the configure scripts of libelf versions 0.8.13 and
0.8.12 do not honour the --host option. The compiler must be given as an
environment variable or the process will use the command "gcc" as the
compiler.
It seems that this is already done in the function do_libelf_target in
scripts/build/companion_libs/libelf.sh, but not in function do_libelf.
