The custom-tarball symlink was created in CT_SRC_DIR, when it
should be created in CT_TARBALLS_DIR.
Reported-by: Guylhem Aznar <crossgcc@guylhem.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The script that is installed, and which sole purpose is to dump
the .config that was used to build the toolchain, is pure insanity.
Let's make it much, much more simpler...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
./configure does check for the presence of gz and bzip2, so we can
safely use them in the build scripts.
On the other hand, more recent formats (eg. XZ) are not yet widely
available, and we do not want, and can't, force the user to install
them as a pre-requisite.
So, build up a list of allowed tarball formats based on the available
decompressors. For no, this is a static list, but the upcoming XZ
support will conditionnaly add to this list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Simplify the way the custom tarball is handled:
- fake version="custom"
- at download, simply link the custom tarball to:
"linux-custom.${custom_extension}"
- at extract, the above allows to simply extract "linux-${LINUX_VERSION}"
where LINUX_VERISON is set to the fake version="custom"
Not that much convoluted, in fact... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Although ctor/dtor do not seem strictly required, missing them proves
rather inconvenient, as ld can't link binaries.
Reported-by: John Spencer <maillist-uclibc@barfooze.de> (sh4rm4 on IRC)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When downloading via svn/cvs/... an attempt to retrieve from the
mirror is made. If the mirror does not have the required tarball,
an error message is printed. This is misleading, as the download
may later succeed via svn/cvs/...
Remove the messages about failed downloads altogether.
At the same time, use "if ... then ... fi" instead of "... && ..."
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This is needed later, when we'll conditionnally use both the
upstream and the mirror URLs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, the mirror can be used either:
- as a fallback in case upstream is unavailable (default behavior)
- as the preferred source for downloads
But the most common use-case seems to provide a truely-LAN mirror
to speed up downloads in big corpos', and/or provide a 'trusted'
source for the tarballs.
So, make the following changes;
- if a mirror is specified, always try that before trying upstream
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The cvs download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via cvs.
In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).
Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.
Of course, if no mirror is specified, no URL wil be available, and
the standard cvs retrieval will kick in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The svn download helper looks for the local tarballs dir to see if it
can find a pre-downloaded tarball, and if it does not find it, does
the actual fetch to upstream via svn.
In the process, it does not even try to get a tarball from the local
mirror, which can be useful if the mirror has been pre-populated
manually (or with a previously downloaded tree).
Fake a tarball get with the standard tarball-download helper, but
without specifying any upstream URL, which makes the helper directly
try the LAN mirror.
Of course, if no mirror is specified, no URL wil be available, and
the standard svn retrieval will kick in.
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
When retrieving tarballs from upstream, if no URL was given, do not
fail; simmply ignore that fact.
This will be used later when the SVN helper will call the standard
helper to try the LAN mirror before trying svn.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
do_libc_locales_extract() and do_libc_locales() in glibc-eglibc.sh-common have
been overridden for both glibc and eglibc, so they can now be removed, which
this patch does.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds partial support for glibc locales.
For now, it only generates the appropriate locales when the host and the target
have the same endianness and uint32_t alignment.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
This patch adds a common glibc/eglibc infrastructure to build and install the
libc locales.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Someof the mingw32 source tarballs have an appended '-src' after the
version.
Since changeset #6e1412ba8da9 (scripts/functions: force extract folder
to archive basename), it means mingw tarballs get extracted in a directory
ending with '-src'.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Now that we akways extract the tarballs in a sane location (see changeset
#6e1412ba8da9: scripts/functions: force extract folder to archive basename),
the uClibc snapshot dir now has the date (as version) in it, eg.:
uClibc-20100710
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Samples should contain kconfig-parsable definitions, not script variables.
.config.2 contains bash arrays, which is definitely not kconfig-safe...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some archives like those of the 2011.07 revisions of Linaro GCC contain a folder
name different from the archive basename, which leads to errors afterwards, e.g.
when patching. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 extracts to gcc-linaro-4.5-2011.07-0/
This patch changes CT_Extract() to force the extraction of all archives to a
folder named like the archive basename. E.g.:
gcc-linaro-4.5-2011.07.tar.bz2 now extracts to gcc-linaro-4.5-2011.07/
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Currently, no --enable-add-ons option is passed to libc configure when
"$(do_libc_add_ons_list ,)" is empty, which makes configure automatically search
for present add-ons. In that case, all present add-ons are built, although
no add-on was selected by the user in the config. Moreover, this can make the
configure fail if some non-standard add-ons like eglibc-localedef are present.
This behavior also leads to an inconsistency from a user point of view between
the following cases:
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS="none" in the config,
which makes "$(do_libc_add_ons_list ,)" return "", so all present add-ons
are built.
- LIBC_ADDONS_LIST="", LIBC_GLIBC_USE_PORTS=n and THREADS!="none" in the
config, which makes "$(do_libc_add_ons_list ,)" return the add-on supporting
the chosen threading implementation, e.g. "nptl", so only this add-on is
built.
This patch disables the building of all add-ons in that case.
It is still possible to build all present add-ons by adding --enable-add-ons to
LIBC_GLIBC_EXTRA_CONFIG_ARRAY.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
gdb needs to know where to find the libstdc++ helper python script
to do, well, whatever it has to do with it...
We can't install that in the user's ~/.gdbinit, it's too complex to
handle all the cases. Moreover, if the user is using more than one
toolchain, we can't put all that stuff in there...
Just provide a sample config file the user can adapt to his/her
own needs.
Thanks go to Khem RAJ for providing such a hint:
http://sourceware.org/ml/crossgcc/2011-07/msg00026.html
Reported-by: ANDY KENNEDY <ANDY.KENNEDY@adtran.com>
CC: Khem Raj <raj.khem@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The place to get 3.x has changed; the version scheme has changed.
No need to be overkill, just support 3.x; 4.x is not even dreamt of.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
If the user builds a toolchain over an existing one, so, without removing
CT_PREFIX_DIR, the build fails as the symlinks already exist, as does the
build.log.
This can also happen (for build.log) if the user first ran in download-
or extract-only.
Patch (with no SoB) originally from:
Phil Wilshire <phil.wilshire@overturenetworks.com>
Modified by me as it did not apply cleanly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
During the build, we create lib{32,64}/ symlinks out of the sysroot.
In some cases (eg. mingw32 target), these symlinks are still required
when running the toolchain. For other combinations, the symlinks are
without incidence, so they can be safely kept after the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case there's one lingering around (whether the previous build was
successful, or failed), we have to remove the buildtools directory
as well as the toochain build dir.
This should also fix the case where out makeinfo wrapper calls
itself recursively.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Maintaining thos multi-line shell commands in a Makefile rule is
a real PITA.
Move the two affected rules (build_gen_choice_in and build_gen_menu_in
to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The new MIPS-specific options are not valid for other targets.
Also, move the arch-specific setting lower in the extra_config setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add the following MIPS specific options when configuring gcc:
--with(out)-llsc
--with(out)-synci
--with(out)-mips-plt
--with-divide=type
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to specify the hash type that gcc will ask the linker to use.
It is a provision for the upcoming 4.7, as no version currently supports it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to configure gcc with --enable-linker-build-id.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Instead of getting eglibc over standard svn://svn.eglibc.org
Add an option that allows the user to get source from
http://www.eglibc.org/svn
This is useful if you are behind a firewall or proxy.
If you are behind a proxy, don't forget to configure
${HOME}/.subversion/servers
In the [global] section setup your proxy configuration.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@anciens.enib.fr: removed useless 'default n']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
That option is coming from the original crosstool, and is not entirely
understand here.
Moreover, it breaks with newer gcc-s: 4.6.1 now breaks while configuring
libjava (and probably some other libs as well, untested).
There is an related bug report to the gcc BZ:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49555
If need be, the old behavior can be restored with:
CC_CORE_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
CC_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Refactor the contents of 'do_libc_start_files()' and 'do_libc()' into a
parameterized 'do_libc_backend()'. 'do_libc_start_files()' and 'do_libc()'
call 'do_libc_backend()' with either 'libc_mode=startfiles' or
'libc_mode=final' (respectively) so that the startfiles/headers and
the final libc builds are configured and built with the same options.
One example of where this is needed is when building a mips toolchain.
Previously, if you were building an n32 toolchain, you wouldn't have
noticed an issue, because if '-mabi' is not in CFLAGS, n32 is the
default:
http://sourceware.org/git/?p=glibc-ports.git;a=blob;f=sysdeps/mips/preconfigure;hb=HEAD
But when trying to build an o32 or n64 toolchain the build would
have failed. This is because (e)glibc expects "-mabi={o32,n32,n64}" to be
in CFLAGS, but was not previously provided in 'do_libc_start_files()'.
The build failure would happen in the shared-core gcc when it tries to
configure an n64 or o32 gcc with an n32 libc.
A simpler solution would have been to just add TARGET_CFLAGS to configure
in 'do_libc_start_files()', but this way makes configure and make
consistent for both steps.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.
Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"
Hence, expat should be considered mandatory.
On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.
This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
