So that 'ct-ng saveconfig' works properly.
Also, run it through 'ct-ng saveconfig' so that default options are removed.
Signed-off-by: Alexey Neyman <stilor@att.net>
This follows the trend set by 1*.sh scripts that configure ISL, GMP,
MPFR, CLooG, etc. Building with shared libraries presents all kinds
of problems:
- The shared libraries need to be installed into ${CT_PREFIX_DIR}.
- The binaries linked against companion libs need to have proper
RPATH, or they're looking for shared libs in
.build/${CT_PREFIX}/buildtools/lib.
- All libraries must agree as to whether they're built shared,
static, or both. Otherwise, gettext tries to link in static libncurses.a
into a shared library and fails (since libncurses was compiled without
the -fPIC switch and hence contains relocations that cannot be handled
in a shared library).
So this fixes the current mess. If we decide to re-enable building
the companion libs shared, we should probably make this dependent on
a separate suboption of CT_STATIC_TOOLCHAIN.
Add a config loosely based on one reported in the issue 274.
Signed-off-by: Alexey Neyman <stilor@att.net>
This enables the resulting toolchaing to be used to build a canadian
cross to x86_64-pc-linux-gnu target. Unmark that sample as broken,
it now builds successfully.
It is likely that it is affected by issue #483, too - I see the
resulting gcc executable has a DLL dependency on libiconv-2.dll,
which is only installed into .build/.../buildtools. This will be
investigated/fixed separately.
Signed-off-by: Alexey Neyman <stilor@att.net>
Put xtensa core name to the tuple vendor string (without any overlay the
default core is 'fsf') and rename sample directory accordingly.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Add -mlongcalls and -mtext-section-literals to target CFLAGS. Target
libraries built with these flags have great call range, useful for linux
applications.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
To build uClibc correctly we need correct endianness selected in the
crosstool-NG. Xtensa cores may be little- or big-endian, but this
property is static. The toolchain knows the core endianness and doesn't
need options to select it.
Enable ARCH_SUPPORTS_BOTH_ENDIAN and select LE by default. Specify empty
CT_ARCH_ENDIAN_CFLAG so that -m{big,little}-endian don't get added to
the TARGET_CFLAGS, as it's not supported by gcc. Specify empty
CT_ARCH_ENDIAN_LDFLAG so that -EB/-EL don't get added to the
TARGET_LDFLAGS as they are ignored. Select big-endian in the example
xtensa-unknown-linux-uclibc configuration.
This fixes uClibc toolchain build for little-endian cores.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
No threads (uclibc/libpthread does not compile on ARMv8); no C++ (libitm
depends on pthreads), no GDB/DUMA (depend on threads).
Signed-off-by: Alexey Neyman <stilor@att.net>
Based on the following samples:
- x86_64-unknown-linux-gnu (-m64/-m32/-mx32)
- powerpc64-unknown-linux-gnu (-m64/-m32)
- mipsel-unknown-linux-gnu (-mabi={32,n32,64})
- sh4-unknown-linux-gnu (-m4/-m4a)
- x86_64-unknown-linux-uclibc (-m64/-m32)
- mips64el-unknown-linux-uclibc (-mabi={32,n32,64})
New samples:
- sparc64-multilib-linux-gnu (-m64/-m32)
- sh4-multilib-linux-uclibc (-m4/-m4a/-m3)
- x86_64-multilib-linux-musl (-m64/-m32)
Notably missing is arm-unknown-linux-gnu (aprofile): GLIBC does not
compile in one of the variants in its multilib set (-march=armv4t
-mthumb) due to missing atomic ops implementation.
Signed-off-by: Alexey Neyman <stilor@att.net>
This change adds a powerpc64le-unknown-linux-gnu sample that can be used
to quickly create a little-endian tool-chain for powerpc64
architecture. This sample is based on the earlier work done by "Yann
E. MORIN" to add support for powerpc64 tool chain and implementing the
power64-unknown-linux-gnu sample. The existing sample however generates
a big-endian tool chain by default.
Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com>
With avr-libc 2.0.0 released, we no longer need to force gcc 4.9.x for
the avr toolchain. So, remove the gcc version constraint and allow it to
follow the default gcc version. There is also no need to force companion
libraries' versions anymore.
The 'experimental' flag was also removed from the description as it
seems to be following upstream development now.
This sample has been build tested on Arch Linux and Ubuntu 14.04 hosts.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
I couldn't get this sample to build. I tried rolling ct-ng back to 1.22
and back to the commit that introduced it, to no avail. Not sure if it
ever built on my machine.
The first problem is the failure to build binutils/gold because of the
missing <pthread.h> in mingw. However, even if CT_BINUTILS_GOLD_THREADS
option is unset, the build dies in configure of the pass-1 of the core CC.
The config.log states that it failed to link with libmpfr.a, which has
a lot of undefined references to symbols like '__imp___iob_func'.
Googling shows that these symbols are some dark Cygwin/MinGW magic and I
do not have the knowledge of these arcana. Let some other MinGWizard fix
it another day.
Signed-off-by: Alexey Neyman <stilor@att.net>
There is invalid assembly in dmalloc for PowerPC. The issue is that
'stw' expects a memory operand, and =g constraint allows both registers
and memory. Newer GCC tends to choose register even at -O0, resulting in
invalid assembly. Instead, force a register constraint in 'mflr' and let
GCC decide if it wants to store it into memory at all.
Reported this upstream.
Signed-off-by: Alexey Neyman <stilor@att.net>
With the upcoming release of 1.22.0, mingw-w64 is still in an
experimental state, and is not considered to be fully supported yet.
This change should be reverted after the release.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
As per 4be766254d, mips64 is not longer
experimental, and as such, the samples should not need it enabled.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Drop ARCH_ARCH/ARCH_TUNE where it is overridden by ARCH_CPU. Also, same
updates as in the previous batch for architectures with
!ARCH_EXCLUSIVE_WITH_CPU (i.e. where there is no need to drop
ARCH_CPU/ARCH_TUNE).
Signed-off-by: Alexey Neyman <stilor@att.net>
I was going to start doing some autoconf work, and noticed that
configure.in was executable. Then I noticed Makefile.in was executable.
o.O
So, I ran ```find . -type f -executable``` and found a bunch of files
that shouldn't be set executable.
This commit makes them normal files again.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
