- Use fork's name, not the master package name
- Allow to use a choice selector when printing a package
- Consider complibs always present (they are, gcc does require gmp/...)
Signed-off-by: Alexey Neyman <stilor@att.net>
Also fix test-packages: it was saving the output from CT_DoLog into
the checksum file. Also use one file per version.
Signed-off-by: Alexey Neyman <stilor@att.net>
1. On SuperH, configuring GCC with explicit variant of the CPU
(like "sh4") limits the default set of multilibs to just that CPU
and requires --with-multilib-list to change. Allow for "unspecified"
variant, so that we can defer to GCC to determine the list.
2. Support toolchains with both endiannesses at the same time.
3. Add a SuperH/newlib sample
4. Add more flags processing for uClibc
Signed-off-by: Alexey Neyman <stilor@att.net>
While here, also consider patched by anything other than "bundled patches"
as per-target sources. Add scary warnings in case of a failure.
Signed-off-by: Alexey Neyman <stilor@att.net>
... because there the symbols were constructer part by part.
Also, remove cc.sh and source $(CT_CC).sh directly - we only build
a single compiler at a time.
Signed-off-by: Alexey Neyman <stilor@att.net>
- Need GDB8.0 milestone
- Make uClibc "master" package
- Rename bionic -> android-ndk to match the package name and
support suffixes for archives
Signed-off-by: Alexey Neyman <stilor@att.net>
... fails on DUMA because it cannot be compiled by newer C++, and patches
are not applied to checkouts from VCS.
Signed-off-by: Alexey Neyman <stilor@att.net>
Also disable per-arch patch application: this doesn't play well with the
reuse of the sources in .build/src
Signed-off-by: Alexey Neyman <stilor@att.net>
On cygwin, creating both "foo.exe" and "foo" results in 'ln -sf'
returning an error ("File exists"). However, ln silently removes
the "foo.exe" in this case, so an attempt to re-run the same command
manually then succeeds.
Hence, make binutils.sh also create symlinks with .exe prefix,
using the new & shiny routine.
Signed-off-by: Alexey Neyman <stilor@att.net>
Also a fix for CT_IterateMultilibs: it didn't pass multi_os_dir_gcc, so
it only worked if the caller did *not* declare it as a local variable.
Signed-off-by: Alexey Neyman <stilor@att.net>
Convert absolute targets to relative so that they are valid on the host,
too. The procedure is very similar to uclibc, so it is moved into a
common function.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and in addition to final toolchain aliasing, use it when configuring
multilibs for glibc/musl. Note that uClibc does not need it, it is
explicitly selecting the tools using CROSS_PREFIX.
Signed-off-by: Alexey Neyman <stilor@att.net>
Some software starts to adopt xz-only distribution (strace,
gcc-linaro, ...). Better that than deal with cryptic errors like
"cannot find strace-.tar.bz2".
Signed-off-by: Alexey Neyman <stilor@att.net>
After much struggling with macos (BSD) sed and even getting everything
work in crosstool-ng itself, I had to abandon that because some
components rely on GNU syntax. Specifically, GNU libc uses '/.../{H;g}'
(note absense of the separator after 'g').
So, revert the -r/-E detection and check for sed's being of GNU origin.
MacOS people, sorry, but you'd have to install GNU sed.
Signed-off-by: Alexey Neyman <stilor@att.net>
... and then use the right option. See the note in scripts/functions
on where we should use ${foo} and where just 'foo'; this boils down to
whether we can expect the build tools override to be in effect (e.g. in
the actual build scripts) or not (i.e. outside of scripts/build).
While running in scripts/functions, or in scripts/crosstool-NG.sh the
build tools override directory (.build/tools/bin) may have not been
set up (yet, or at all).
Also, modify the installed scripts (populate, xldd) accordingly.
Signed-off-by: Alexey Neyman <stilor@att.net>
instead of 'make oldconfig' and responding 'y'. This avoids 'Broken pipe'
errors in the log, as well as selects default setting for all options not
explicitly set.
This requires a small fix in the old uClibc. Won't have to maintain that fix
for long though :)
Signed-off-by: Alexey Neyman <stilor@att.net>
Makes them sorted out by host, and removes the need for similar hack in
samples.mk.
Change how canadian crosses are named: using `=' character resulted in
Glibc build failure.
Move loading config into a common function, CT_LoadConfig.
Signed-off-by: Alexey Neyman <stilor@att.net>
This is needed for callbacks that use that directory to look inside
GCC internal directories, e.g. moving the libraries. This broke
when I made libexpat for target honor ${CT_SHARED_LIBS}.
Signed-off-by: Alexey Neyman <stilor@att.net>
The referenced commit replaced 'make' with '${make}' everywhere. This is
wrong for at least the utilities that we may build as companion tools
(make, libtool): this will always invoke the version detected by configure
by supplying the absolute path. In other words, the wrappers in
.build/tools/bin are not fallbacks - they are either temporary (in case
a respective companion tool is built) or permanent redirectors.
This is the reason why the PATH= has .build/*/buildtools/bin at higher
precedence than .build/tools/bin; the latter has the versions detected by
configure and the former has the versions built as companion tools.
Revert the rest of the gang (grep/sed/...) for consistency. After all,
we may decide to supply some of them as well (awk, for instance).
Signed-off-by: Alexey Neyman <stilor@att.net>
Rather than echo-ing the new value, set the value into the variable with
the name passed as an argument (similar to CT_SanitizeVarDir). This
allows to use CT_DoLog in these functions.
Signed-off-by: Alexey Neyman <stilor@att.net>
This step was only used in uClibc. However, with upcoming multilib, the
config management will have to be done for each variant differently,
anyway.
uClibc was the only user of libc_check_config step, as well as
CT_CONFIG_DIR directory. Retire these.
Two other clean-ups in uClibc.sh:
- KERNEL_HEADERS check seems to be bogus, this config option is not
present even in 0.9.30 - which is not supported already.
- SHARED_LIB_LOADER_PREFIX was renamed to MULTILIB_DIR in 0.9.31,
according to ChangeLog - and MULTILIB_DIR is passed from command line
instead.
Signed-off-by: Alexey Neyman <stilor@att.net>
Install startfiles for libc variants into the most specific combination
(suffixed sysroot, if applicable + suffixed multi-os dir, if
applicable). Install headers once in every suffixed sysroot (although it
seems that GCC picks up headers from top-level sysroot, GCC manual
claims that sysroot suffix affects headers search path).
In uClibc, this requires a better sanitization of the directory: it
creates symlinks from {sysroot}/usr/lib/{multi_os_dir} to
{sysroot}/lib/{multi_os_dir} and to do so, it counts the number of path
components in the libdir. This breaks if one of such components is `..'
- symlinks contain an extra `../..' then. Since such sanitization had to
be implemented anyway, use it in other places to print more sensible
directory names.
Also, fix the description of configure --host/--target per musl's
configure help message (and its actual code).
Signed-off-by: Alexey Neyman <stilor@att.net>
On some arches (e.g. MIPS) the options like -mabi do not work if
specified more than once (see the comment in 100-gcc.sh). Therefore,
we need to determine which of the options produced by <arch>.sh can
be passed to multilib builds and which must be removed (i.e., which
options vary among the multilibs).
This presents a chicken-and-egg problem. GCC developers, in their
infinite wisdom, do not allow arbitrary multilib specification to be
supplied to GCC's configure. Instead, the target (and sometimes some
extra options) determine the set of multilibs - which may include
different CPUs, different ABIs, different endianness, different FPUs,
different floating-point ABIs, ... That is, we don't know which parts
vary until we build GCC and ask it.
So, the solution implemented here is:
- For multilib builds, start with empty CT_ARCH_TARGET_CFLAGS/LDFLAGS.
- For multilib builds, require core pass 1. Pass 1 does not build any
target binaries, so at that point, our target options have not been
used yet.
- Provide an API to modify the environment variables for the steps that
follow the current one.
- As a part of multilib-related housekeeping, determine the variable
part of multilibs and filter out these options; pass the rest into
CT_TARGET_CFLAGS/LDFLAGS.
This still does not handle extra dependencies between GCC options (like
-ma implying -mcpu=X -mtune=Y, etc.) but I feel that would complicate
matters too much. Let's leave this until there's a compelling case for
it.
Also, query GCC's sysroot suffix for targets that use it (SuperH,
for example) - the default multilib may not work if the command line
specifies the default option explicitly (%sysroot_suffix_spec is not
aware of multilib defaults).
Signed-off-by: Alexey Neyman <stilor@att.net>
The previous patch added the function 'CT_DoMultilibTarget()' to
scripts/build/arch/*.sh.
This patch calls the common function to (currently) get just the target
tuple for the current multilib target.
This patch was originally by: Cody P Schafer
Changed by Alexey Neyman: first, try `gcc -print-multiarch`. If it is
supported, use whatever it reports. Otherwise, fall back to our
guesswork. Move "i486" quirk into glibc.sh, as it is specific to glibc
(e.g. uclibc will need i386, which is what GCC reports).
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
Signed-off-by: Alexey Neyman <stilor@att.net>
I should have just used ln -sf when I rewrote the custom locations
change. BSD based systems don't have 'cp -s', so switch to using 'ln
-sf'.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Hardlinking the custom source directory does not work across separate
mount points. Chnage this to a softlink instead.
This closes#336
Reported-by: Jasmin Jessich <jasmin@anw.at>
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
The previous version of CT_GetCustom was a bit... funky.
It didn't handle custom versions to location very well.
This new version is exactly as it appears:
CT_GetCustom <name> <version> <location>
The name is the beginning of the archive (file or directory).
The version is the second half of the archive.
The location is where it can be found. This should be made an absolute
path, but this version is expecting the path in kconfig to be absolute.
A file should extract to a directory: <name>-<version>
A directory will be copied to: <name>-<version>
This keeps our expectations of what we should get.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
If we are using a custom location, and that custom location is a
directory that does not have an associated tarball, then we shouldn't
warn about not finding a tarball in CT_TARBALLS_DIR if
CT_SRC_DIR/.<basename>.extracted is found.
If the extracted file is not found, then we can warn that the tarball
was not found then error out that the tarball is missing.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
We check for apps:
* make
* sed
* grep
* awk
* libtool/libtoolize
* install
* patch
* and more
...during configure. Our scripts should be consistent about using the
variables that define where the found tool was found.
Of course, we do hard-link these tools in buildtools, but that should be
a backup for the components we are building. Our scripts should always
use the tools we find.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This commit adds 4 new functions to aid in the process of managing a
kconfig .config file:
* CT_KconfigSetOption <option> <value> <file>
* CT_KconfigEnableOption <option> <file>
* CT_KconfigDisableOption <option> <file>
* CT_KconfigDeleteOption <option> <file>
(akin to how buildroot manages the uClibc.config)
These functions are global so that we can manage any component that also
uses kconfig, or to be able to use it internally on Crosstool-NG's
kconfig files.
Last but not least, be consistent and update sed to be ${sed}!
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
If the build is aborted before the working directory is created,
there's also an induced error message about inability to create
a 'backtrace' file. But in that case, there is no subshells executing
yet.
Signed-off-by: Alexey Neyman <stilor@att.net>
avr-libc doesn't have write permissions in these by default in the 1.8.1
tar release, this caused an error during build with
CT_OVERIDE_CONFIG_GUESS_SUB enabled.
chmod u+w them before overriding to avoid an this error.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Add support for applying arch-specific patches found in
"patches/${pkgname}/${version}/${CT_ARCH}".
This is needed for applying a popular binutils patch specific for the
AVR architecture but which isn't isolated for AVR in binutils' code.
In this case, applying it for every architecture would end up bloating
binutils' "size" options with AVR specifics.
This feels like a bit of a hack but it is easy enough to support with
current crosstool-ng infrastructure, seems like worth it for this case.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This commit adds support for the avr-libc C library.
According to the project page at http://www.nongnu.org/avr-libc , the
avr-libc package provides a subset of the standard C library for Atmel
AVR 8-bit RISC microcontrollers. In addition, the library provides the
basic startup code needed by most applications.
Support for this library in crosstool-ng is only enabled for the AVR
8-bit target.
The avr-libc manual and most distributions build the AVR 8-bit gcc
toolchain with the "avr" (non-canonical) target.
Some experimentation also led to the conclusion that other (canonical)
targets are not very well supported, so we force the "avr" target for
crosstool-ng as well.
The manual also recommends building avr-libc after the final gcc build.
To accomplish this with crosstool-ng, a new do_libc_post_cc step is
added, in which currently only avr-libc performs its build, and is a
no-op for the other libc options.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
This functionality was provided so that crosstool-ng could have a
further set of patches considered experimental and unsupported.
Now that musl-libc support is making it's way upstream in gcc, I'm
removing this support and the experimental musl patches.
In later commits, backports from gcc upstream will be added to the
supported patch sets to support musl-libc.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
when specifying a custom kernel provided as a tar ball, the tar ball gets symlinked. the -e test will fail.
Signed-off-by: Dirk Husemann <dirk@d2h.net>
Pass cset as ref=somename to use this feature. CT_GetGit echos
the cset sha1 on exit since the caller will need to know that
information as it forms part of the downloaded tarball name.
Signed-off-by: Ray Donnelly <mingw.android@gmail.com>
As posted on http://www.eglibc.org/
====================
EGLIBC is no longer developed and such goals are now being addressed
directly in GLIBC.
====================
I'm not interested in maintaining build support for unsupported
software.
Older branches of crosstool-ng continue to have eglibc support.
If you find issues with older branches, I'm always open to pull
requests.
Removing eglibc also frees up glibc cleanup and build optimization.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
This patch adds initial support for musl-libc.
Musl-libc versions currently supported:
* 1.0.3 (Stable)
* 1.1.3 (Previous Mainline)
* 1.1.4 (Mainline)
Futher improvements are needed.
* gcc-4.9.x has issues (Might be fixed in musl-1.1.4).
* Multilib support is needed.
* Checks to make sure paths are correct.
* Move to 2-step gcc build. 3-step build is not necessary.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: removed the gcc musl patch, to be added later;
removed dead code do_get_arch()]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This change adds support for experimental patches to be introduced to
crosstool-ng. The patches enabled by this option are to be located here:
patches/experimental/<package>/<version>/XXXX-NAME.patch
Where, XXXX is the patch number to be applied in order, like:
0001-some_patch_one.patch
0002-some_patch_two.patch
9999-some_patch_to_be_applied_last.patch
In the first patch series, all patches in the EXPERIMENTAL_PATCHES
option will be applied all at once, or none at all.
In a later [RFC] patch, I plan on adding finer tuned patch
enable/disable options based on the name of the patch and where it is
located in the patches/experimental sub-tree. So the name of the patch
should use underscores between words in the patch name.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@free.fr: slightly reword prompt]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
These variables behave the same for bitness as their counterparts do
for endianness: they are defined to the appropriate bitness.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <dev@codyps.com>
We currently define target_endian_el and target_endian_eb to be the
tuple extension depending on endianness, defined to be respectively
'el' or 'eb' according to the endianness.
Some architecture do not use 'el' or 'eb', but use 'le' or 'be'.
Provide that as well, as two new variables: target_endian_le and
target_endian_be.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cody P Schafer <dev@codyps.com>
Allow '-1' to be specified as CONNECTION_TIMEOUT to disable the use
of the connection timeout for wget.
Signed-off-by: Cody P Schafer <dev@codyps.com>
Message-Id: <cb33f8c2cbaf802d4f04.1399687632@localhost>
Patchwork-Id: 347582
'zcat' on MacOS-X is broken (it is not gzip's zcat, but compres' zcat).
Use 'gzip -dc' for portability, as suggested by Anthony.
Reported-by: Fernando Ortiz <fortiz2k@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Anthony Foiani <anthony.foiani@gmail.com>
This patch fixes the download of the avr32 headers in crosstool-ng by
fetching them directly from Atmel's web site instead of the now-broken URL
given by the original author of the avr32-header-fetching modification,
who fetched them from a copy on his own, now-defunct server.
It also adds the necessary logic to extract from a zip file, as that is
how the headers are packaged.
To configure it for avr32 after launching ct-ng menuconfig in an empty
directory:
Paths and misc options ->
Shell to use as CONFIG_SHELL = sh
Target options ->
Target Architecture = avr32
Toolchain options ->
Tuple's alias = avr32
Binary utilities ->
binutils version = 2.18a
C compiler
gcc version = 4.2.2
C-library
newlib version = 1.17.0
Enable IOs on long long = yes
Enable IOs on floats and doubles = yes
Disable the syscalls supplied with newlib = yes
CONFIG_SHELL is necessary to get round the "fragment: command not
found" bug when binutils-2.18 is configured using bash.
Prepared against crosstool-ng mercurial trunk on 31 March 2012.
Signed-off-by: Martin Guy <martinwguy@gmail.com>
[yann.morin.1998@free.fr: update bundles sample accordingly]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Message-Id: <CAL4-wQrg_NQ7jm-NCADqeyQr9twyhtx42OUGNThP6gWeqZc=kw@mail.gmail.com>
Patchwork-Id: 232612
