Maintaining thos multi-line shell commands in a Makefile rule is
a real PITA.
Move the two affected rules (build_gen_choice_in and build_gen_menu_in
to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
cvs is used to get newlib directly from its repository. Missing cvs
will only allow getting newlib from the released tarballs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It is useful to sometime run on a strictly POSIX-compliant
shell... :-/
And it is sometime interesting to refresh Q-patches before
finishing the series... :-(
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The new MIPS-specific options are not valid for other targets.
Also, move the arch-specific setting lower in the extra_config setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Rather than building all possible library names in the caller,
lets just do it once in check_for.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Static liunking is not supported on Darwin, so hide the corresponding
options when the build machine is Darwin.
Reported-by: Andrea Franceschini <therealmorpheu5@gmail.com>
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reported-by: "Titus von Boxberg" <titus@v9g.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Indent the error/warning message so that it is explicit that
the second line is giving details for the first general hint.
Reported-by: Titus von Boxberg <titus@v9g.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add the following MIPS specific options when configuring gcc:
--with(out)-llsc
--with(out)-synci
--with(out)-mips-plt
--with-divide=type
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to specify the hash type that gcc will ask the linker to use.
It is a provision for the upcoming 4.7, as no version currently supports it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Add an option to configure gcc with --enable-linker-build-id.
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Instead of getting eglibc over standard svn://svn.eglibc.org
Add an option that allows the user to get source from
http://www.eglibc.org/svn
This is useful if you are behind a firewall or proxy.
If you are behind a proxy, don't forget to configure
${HOME}/.subversion/servers
In the [global] section setup your proxy configuration.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
[yann.morin.1998@anciens.enib.fr: removed useless 'default n']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
That option is coming from the original crosstool, and is not entirely
understand here.
Moreover, it breaks with newer gcc-s: 4.6.1 now breaks while configuring
libjava (and probably some other libs as well, untested).
There is an related bug report to the gcc BZ:
http://gcc.gnu.org/bugzilla/show_bug.cgi?id=49555
If need be, the old behavior can be restored with:
CC_CORE_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
CC_EXTRA_CONFIG_ARRAY="--enable-symver=gnu"
Reported-by: Bryan Hundven <bryanhundven@gmail.com>
Reviewed-by: Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The patchset was obtained by dumping each changeset on the
upstream 0.9.32 branch since the release:
git log v0.9.32..origin/0.9.32 |sed -r -e '/^commit/!d; s/.* //;' |tac
and then creating a patch from each changeset.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Refactor the contents of 'do_libc_start_files()' and 'do_libc()' into a
parameterized 'do_libc_backend()'. 'do_libc_start_files()' and 'do_libc()'
call 'do_libc_backend()' with either 'libc_mode=startfiles' or
'libc_mode=final' (respectively) so that the startfiles/headers and
the final libc builds are configured and built with the same options.
One example of where this is needed is when building a mips toolchain.
Previously, if you were building an n32 toolchain, you wouldn't have
noticed an issue, because if '-mabi' is not in CFLAGS, n32 is the
default:
http://sourceware.org/git/?p=glibc-ports.git;a=blob;f=sysdeps/mips/preconfigure;hb=HEAD
But when trying to build an o32 or n64 toolchain the build would
have failed. This is because (e)glibc expects "-mabi={o32,n32,n64}" to be
in CFLAGS, but was not previously provided in 'do_libc_start_files()'.
The build failure would happen in the shared-core gcc when it tries to
configure an n64 or o32 gcc with an n32 libc.
A simpler solution would have been to just add TARGET_CFLAGS to configure
in 'do_libc_start_files()', but this way makes configure and make
consistent for both steps.
Signed-off-by: Bryan Hundven <bryanhundven@gmail.com>
./configure now has the possibility to check for libraries and headers
in one go, so we can use it! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Cross-gdb depends on expat and python. If either is missing, cross-gdb will
build successfully, but lacking some features.
Especially, if expat is missing, cross-gdb will be unable to parse the target
description, which may lead to runtime malfunctions and the following GDB
warning:
"Can not parse XML target description; XML support was disabled at compile time"
Hence, expat should be considered mandatory.
On the other hand, the features missing without python are not critical, so
python should not be considered mandatory.
This patch does the following:
- At configure time, warn the user if either expat or python is missing.
- In menuconfig, disable the static build options regarding cross-gdb if no
static version of expat is available, and disable cross-gdb if expat is
missing.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
[yann.morin.1998@anciens.enib.fr: add comment for impossible static cross-gdb]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Currently, check_for() can only test one of prog, inc or lib at once. This patch
removes this limitation.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Currently, error messages just state the obvious: a required
component is required. While in some cases, there is not much
else to say, in some other cases we could tell much more.
For example, a missing libstdc++ means no static toolchain.
Also, format error and warning messages in a similar fashion,
with a {error,warning} intro, followed by the message specified
by the caller.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The latest autocompletion calls 'make -qp' to get all the possible
targets. This currently fails, as our makefile is calling itself
again and again ad-libitum.
Fix it by detecting that the recursion level is not 0, and bail out
if so. It works so well that it has the side effect of showing only
the 'public' target, and hide our internal ones! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
The NPTL add-on has always been internal, so there is no
reason to try downloading it, it will never succeed.
Add provision to skip other add-ons as well.
For consistency, do the same test in both glibc and eglibc.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
"crosstool-NG-${CT_VERSION}" is currently the default for TOOLCHAIN_PKGVERSION,
and this options is passed as is to --with-pkgversion.
This patch prepends "crosstool-NG ${CT_VERSION}" to TOOLCHAIN_PKGVERSION before
passing it to --with-pkgversion.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
Hide the staticaly linked libstdc++ option if the static libstdc++ is not
present, detected at configure time.
Add a blind option that says whether static linking is possible at all.
It defaults to 'y', but depends on the needed CONFIGURE_* options. For
now, it only depends on static libtdc++, but new dependencies can be
easily added.
Hide the global static toolchain option behind this new option.
Original patch by Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
It's probably a good thing to check for at least one instance of
libstdc++.{so,dylib,a} at configure time. At least one is needed
by the companion libraries and gcc.
Original patch by Bryan Hundven <bryanhundven@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
Some addons are bundled with glibc/eglibc, so we should not try to
download and extract them.
This is done as thus:
- at download time:
- if the add-on download fails, keep going;
- at extract time:
- if the addon is present in the source tree, ignore it;
- if the addon is missing in the source tree:
- if the archive is present, extract it;
- if the archive is missing, bail out.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
eglibc is only available from SVN. The script currently calls svn
in its own tortuous and convoluted way.
Use the egeneric SVN extract functions, and sinplify the eglibc
download function.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to retrieve the add-on
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
For glibc/eglibc, if the add-on can not be extracted, we want to catch
the error to print a meaningful error message.
So:
- try to extract the tarball
- if it fails, print a waring instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing extract procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
In case of glibc/eglibc, some add-ons that were previously external are
now internal (bundled with the main sources).
So we do not want to fail if an add-on tarball can't be downloaded; we
want to post-pone the check until we can extract the main archive.
So:
- try to download the tarball
- if it fails, print a warning instead of calling CT_Abort
- return 1
So, components that want to catch the error and want to handle it can,
while components that do not will gracefuly fail thanks to our catching
every errors.
Bonus: it works without changing any existing retrieval procedure! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
This patch makes gdb benefit from the TOOLCHAIN_PKGVERSION and
TOOLCHAIN_BUGURL options.
Signed-off-by: "Benoît THÉBAUDEAU" <benoit.thebaudeau@advansee.com>
