diff --git a/docs/overview.txt b/docs/overview.txt index 404712aa..14ce337d 100644 --- a/docs/overview.txt +++ b/docs/overview.txt @@ -689,10 +689,189 @@ something like: The SoB line is clearly described in Documentation/SubmittingPatches , section 12, of your favourite Linux kernel source tree. -Then you'll need to correctly configure Mercurial. There are two extensions -that you may find usefull: - - mq : http://mercurial.selenic.com/wiki/MqExtension - - patchbomb : http://mercurial.selenic.com/wiki/PatchbombExtension + +How to Use Mercurial | +---------------------+ + +For larger or more frequent contributions, mercurial should be used. + +PREREQUISITES: + +Configuring Mercurial: + You need mercurial with the following extensions: + - mq : http://mercurial.selenic.com/wiki/MqExtension + - patchbomb : http://mercurial.selenic.com/wiki/PatchbombExtension + Usually, these two extensions are already part of the installation package. + The mq extension maintains a separate queue of your local changes + that you can change at any later time. + With the patchbomb extension you can email those patches directly + from your local repo. + + Your configuration file for mercurial, e.g. ~/.hgrc should contain + at least the following sections (but have a look at `man hgrc`): + # --- + [email] + # configure sending patches directly via Mercurial + from = "Your Name" + # How to send email: + method = smtp + + [smtp] + # SMTP configuration (only for method=smtp) + host = localhost + tls = true + username = + password = + + [extensions] + # The following lines enable the two extensions: + hgext.mq = + hgext.patchbomb = + # ---- + +Create your local repository as a clone: + hg clone http://ymorin.is-a-geek.org/hg/crosstool-ng crosstool-ng + +Setting up the mq extension in your local copy: + cd crosstool-ng + hg qinit + + +CREATING PATCHES: + +Recording your changes in the patch queue maintained by mq: + # First, create a new patch entry in the patch queue: + hg qnew -D -U -e short_patch_name1 + + + + + # if you execute `hg status` here, your modifications of the working + # copy should show up. + + # Now the following command takes your modifications from the working copy + # into the patch entry + hg qrefresh -D [-e] + + + # Now your changes are recorded, and `hg status` should show a clean + # working copy + +Repeat the above steps for all your modifications. +The command `hg qseries` informs you about the content of your patch queue. + + +CONTRIBUTING YOUR PATCHES: + +Once you are satisfied with your patch series, you can (you should!) +contribute them back to upstream. +This is easily done using the `hg email` command. + +`hg email` sends your new changesets to a specified list of recipients, +each patch in its own email, all ordered in the way you entered them (oldest +first). The command line flag --outgoing selects all changesets that are in +your local but not yet in the upstream repository. Here, these are exactly +the ones you entered into your local patch queue in the section above, so +--outgoing is what you want. + +Each email gets the subject set to: "[PATCH x of n] " +where 'x' is the serial number in the email series, and 'n' is the total number +of patches in the series. The body of the email is the complete patch, plus +a handful of metadata, that helps properly apply the patch, keeping the log +message, attribution and date, tracking file changes (move, delete, modes...) + +`hg email` also threads all outgoing patch emails below an introductory +message. You should use the introductory message (command line flag --intro) +to describe the scope and motivation for the whole patch series. The subject +for the introductory message gets set to: "[PATCH 0 of n] " +and you get the chance to set the . + +Here is a sample `hg email` complete command line: +Note: replace " (at) " with "@" + + hg email --outgoing --intro \ + --to '"Yann E. MORIN" ' \ + --cc 'crossgcc (at) sourceware.org' + + # It then opens an editor and lets you enter the subject + # and the body for the introductory message. + +Use `hg email` with the additional command line switch -n to +first have a look at the email(s) without actually sending them. + + +MAINTAINING YOUR PATCHES: + +When the patches are refined by discussing them on the mailing list, +you may want to finalize and resend them. + +The mq extension has the idiosyncrasy of imposing a stack onto the queue: +You can always reedit/refresh only the patch on top of stack. +The queue consists of applied and unapplied patches +(if you reached here via the above steps, all of your patches are applied), +where the 'stack' consists of the applied patches, and 'top of stack' +is the latest applied patch. + +The following output of `hg qseries` is now used as an example: + 0 A short_patch_name1 + 1 A short_patch_name2 + 2 A short_patch_name3 + 3 A short_patch_name4 + +You are now able to edit patch 'short_patch_name4' (which is top of stack): + + # and execute again + hg qrefresh -D [-e] + + +If you want to edit e.g. patch short_patch_name2, you have to modify +mq's stack so this patch gets top of stack. +For this purpose see `hg help qgoto`, `hg help qpop`, and `hg help qpush`. + + hg qgoto short_patch_name2 + # The patch queue should now look like + hg qseries + 0 A short_patch_name1 + 1 A short_patch_name2 + 2 U short_patch_name3 + 3 U short_patch_name4 + # so patch # 1 (short_patch_name2) is top of stack. + + # and execute again + hg qrefresh -D [-e] + + # the following command reapplies the now unapplied two patches: + hg qpush -a + # you can also use `hg qgoto short_patch_name4` to get there again. + + +RESENDING YOUR REEDITED PATCHES: + +By mailing list policy, please resend your complete patch series. +--> Go back to section "CONTRIBUTING YOUR PATCHES" and resubmit the full set. + + +SYNCING WITH UPSTREAM AGAIN: + +You can sync your repo with upstream at any time by executing + # first unapply all your patches: + hg qpop -a + # next fetch new changesets from upstream + hg pull + # then update your working copy + hg up + # optionally remove already upstream integrated patches (see below) + hg qdelete + # and reapply your patches if any non upstream-integrated left (but see below) + hg qpush -a + +Eventually, your patches get included into the upstream repository +which you initially cloned. +In this case, before executing the hg qpush -a from above +you should manually "hg qdelete" the patches that are already integrated upstream. + + +HOW TO FORMAT COMMIT MESSAGES (aka patch desciptions): Commit messages should look like (without leading pipes): |component: short, one-line description @@ -707,31 +886,6 @@ Here is an example commit message (see revision a53a5e1d61db): |For any later versions, the directory name does have the version, such as |cloog-ppl-0.15.4. -Here's a typical hacking session: - hg clone http://ymorin.is-a-geek.org/hg/crosstool-ng crosstool-ng - cd crosstool-ng - hg qinit - hg qnew -D -U -e my_first_patch - *edit patch description* - *hack* *hack* *check* *fails* *hack* *hack* *check* *works* - hg qref -D -e - *edit patch description, serving as commit message* - hg qnew -D -U -e my_second_patch - *edit patch description* - *hack* *hack* *check* *fails* *hack* *hack* *check* *works* - hg qref -D -e - *edit patch description, serving as commit message* - hg email --outgoing --intro \ - --from '"Your Full NAME" ' \ - --to '"Yann E. MORIN" ' \ - --cc 'crossgcc (at) sourceware.org' - *edit introductory message* - *wait for feedback* - *re-send if no answer for a few days* - -Note: replace '(at)' above with a plain '@'. - - _____________ / Internals /