Merge pull request #1309 from stilor/upgrades

Upgrades

config/arch/powerpc.in

@@ -11,6 +11,7 @@
 ## select ARCH_SUPPORTS_WITH_CPU
 ## select ARCH_SUPPORTS_WITH_TUNE
 ## select ARCH_SUPPORTS_WITH_FLOAT
+## select ARCH_SUPPORTS_WITH_32_64
 ##
 ## help The PowerPC architecture, as defined by:
 ## help     http://www.ibm.com/developerworks/eserver/articles/archguide.html

config/arch/sparc.in

@@ -10,6 +10,7 @@
 ## select ARCH_SUPPORTS_WITH_CPU
 ## select ARCH_SUPPORTS_WITH_TUNE
 ## select ARCH_SUPPORTS_WITH_FLOAT
+## select ARCH_SUPPORTS_WITH_32_64 if GCC_6_or_later
 ##
 ## help The SUN SPARC architecture, as defined by:
 ## help     32 bit: http://www.sparc.org/standards/V8.pdf

config/arch/x86.in

@@ -8,6 +8,7 @@
 ## select ARCH_SUPPORTS_WITH_ARCH
 ## select ARCH_SUPPORTS_WITH_CPU
 ## select ARCH_SUPPORTS_WITH_TUNE
+## select ARCH_SUPPORTS_WITH_32_64
 ##
 ## help The x86 architecture, as defined by:
 ## help     32-bit (ia32) : http://www.intel.com/

config/target.in

@@ -236,6 +236,11 @@ config ARCH_64
 
 endchoice
 
+# Whether this architecture supports passing --with-{cpu,arch,tune}-{32,64}=
+# to GCC configure.
+config ARCH_SUPPORTS_WITH_32_64
+    bool
+
 #--------------------------------------
 comment "Target optimisations"
 

maintainer/manage-packages.sh

@@ -91,10 +91,11 @@ CT_LIB_DIR=`pwd`
 CT_TOP_DIR=`pwd`
 CT_TARBALLS_DIR=`pwd`/temp.tarballs
 CT_COMMON_SRC_DIR=`pwd`/temp.src
+CT_WORK_DIR=`pwd`/temp.work
 CT_SRC_DIR=`pwd`/temp.src
 CT_LOG_LEVEL_MAX=EXTRA
 CT_TEMP_PATCH_DIR=`pwd`/temp.patches
-mkdir -p ${CT_TARBALLS_DIR}
+mkdir -p "${CT_TARBALLS_DIR}" "${CT_WORK_DIR}"
 
 # Does not matter, just to make the scripts load
 CT_ARCH=arm
@@ -223,6 +224,8 @@ matched=0
 
 run_pkgversion()
 {
+    local descr
+
     while [ -n "${1}" ]; do
         eval "local ${1}"
         shift
@@ -237,8 +240,13 @@ run_pkgversion()
             ;;
         esac
     fi
+    if [ -n "${ver}" ]; then
+        descr="${pkg_name}-${ver}"
+    else
+        descr="${pkg_name} revision ${repository_cset}"
+    fi
 
-    CT_DoStep INFO "Handling ${pkg_name}-${ver}"
+    CT_DoStep INFO "Handling ${descr}"
     matched=$[matched+1]
 
     # Create a temporary configuration head file
@@ -268,30 +276,53 @@ source "config/global/build-behave.in"
 source "config/versions/${master}.in"
 EOF
 
+    # Common part of the config file
     cat >temp.defconfig <<EOF
 CT_${masterpfx}_USE_${originpfx}=y
-CT_${pfx}_SRC_RELEASE=y
-CT_${pfx}_V_${kcfg}=y
 CT_SAVE_TARBALLS=y
+CT_WORK_DIR="${CT_WORK_DIR}"
+# CT_OVERRIDE_CONFIG_GUESS_SUB is not set
 # CT_VERIFY_DOWNLOAD_DIGEST is not set
 ${signature+CT_VERIFY_DOWNLOAD_SIGNATURE=y}
-# CT_OVERRIDE_CONFIG_GUESS_SUB is not set
 EOF
 
+    if [ -n "${kcfg}" ]; then
+        # Regular tarball
+        cat >>temp.defconfig <<EOF
+CT_${pfx}_SRC_RELEASE=y
+CT_${pfx}_V_${kcfg}=y
+EOF
+    else
+        # VCS-based release
+        cat >>temp.defconfig <<EOF
+CT_${pfx}_SRC_DEVEL=y
+CT_${pfx}_DEVEL_VCS="${vcs}"
+CT_${pfx}_DEVEL_URL="${repository_url}"
+CT_${pfx}_DEVEL_BRANCH="${repository_branch}"
+CT_${pfx}_DEVEL_REVISION="${repository_cset}"
+CT_${pfx}_DEVEL_SUBDIR="${repository_subdir}"
+EOF
+    fi
+
     ./kconfig/conf --defconfig=temp.defconfig temp.in >/dev/null
 
     CT_LoadConfig
+    CT_DoExecLog ALL mkdir -p "${CT_BUILD_DIR}"
     rm -f .config .config.old temp.defconfig temp.in
-    if [ -n "${verify_urls}" ]; then
-        CT_DoLog EXTRA "Verifying URLs for ${pkg_name}-${ver}"
-        CT_PackageRun "${masterpfx}" check_pkg_urls
-    fi
-    if [ -n "${create_digests}" ]; then
-        CT_DoLog EXTRA "Creating digests for ${pkg_name}-${ver}"
-        CT_PackageRun "${masterpfx}" create_digests
+    if [ -n "${ver}" ]; then
+        if [ -n "${verify_urls}" ]; then
+            CT_DoLog EXTRA "Verifying URLs for ${descr}"
+            CT_PackageRun "${masterpfx}" check_pkg_urls
+        fi
+        if [ -n "${create_digests}" ]; then
+            CT_DoLog EXTRA "Creating digests for ${descr}"
+            CT_PackageRun "${masterpfx}" create_digests
+        fi
+    else
+        CT_DoLog EXTRA "Not verifying URLs or creating digests for ${descr} (devel release)"
     fi
     if [ -n "${download_pkgs}" ]; then
-        CT_DoLog EXTRA "Downloading ${pkg_name}-${ver}"
+        CT_DoLog EXTRA "Downloading ${descr}"
         CT_Fetch "${masterpfx}"
     fi
     if [ -n "${apply_patches}" ]; then
@@ -315,4 +346,4 @@ CT_EndStep
 CT_DoLog INFO "Handled ${matched} packages/versions"
 [ -r .config-saved ] && mv .config-saved .config
 
-CT_DoExecLog ALL rm -rf ${CT_TARBALLS_DIR} ${CT_COMMON_SRC_DIR} ${CT_TEMP_PATCH_DIR}
+CT_DoExecLog ALL rm -rf "${CT_TARBALLS_DIR}" "${CT_COMMON_SRC_DIR}" "${CT_TEMP_PATCH_DIR}" "${CT_WORK_DIR}"

maintainer/package-versions.template

@@ -10,4 +10,17 @@ run_pkgversion \
     ver=@@ver@@ \
     kcfg=@@ver_sel|@@
 #!end-foreach
+#!if [ -n "@@repository_cset@@" ]
+run_pkgversion \
+    master=@@master@@ \
+    masterpfx=@@master|@@ \
+    originpfx=@@origin|@@ \
+    pkg_name=@@pkg_name@@ \
+    pfx=@@fork|@@ \
+    vcs=@@vcs@@ \
+    repository_url=@@repository_url@@ \
+    repository_branch=@@repository_branch@@ \
+    repository_cset=@@repository_cset@@ \
+    repository_subdir=@@repository_subdir@@
+#!end-if
 #!end-foreach

packages/binutils/2.34/0000-sh-conf.patch

@@ -0,0 +1,34 @@
+r10231 | lethal | 2005-05-02 09:58:00 -0400 (Mon, 02 May 2005) | 13 lines
+
+Likewise, binutils has no idea about any of these new targets either, so we 
+fix that up too.. now we're able to actually build a real toolchain for 
+sh2a_nofpu- and other more ineptly named toolchains (and yes, there are more 
+inept targets than that one, really. Go look, I promise).
+
+---
+ configure    |    2 +-
+ configure.ac |    2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/configure
++++ b/configure
+@@ -3915,7 +3915,7 @@
+   nvptx*-*-*)
+     noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
+     ;;
+-  sh-*-*)
++  sh*-*-*)
+     case "${target}" in
+       sh*-*-elf)
+          ;;
+--- a/configure.ac
++++ b/configure.ac
+@@ -1159,7 +1159,7 @@
+   nvptx*-*-*)
+     noconfigdirs="$noconfigdirs target-libssp target-libstdc++-v3 target-libobjc"
+     ;;
+-  sh-*-*)
++  sh*-*-*)
+     case "${target}" in
+       sh*-*-elf)
+          ;;

packages/binutils/2.34/0001-ld_makefile_patch.patch

@@ -0,0 +1,27 @@
+---
+ ld/Makefile.am |    2 +-
+ ld/Makefile.in |    2 +-
+ 2 files changed, 2 insertions(+), 2 deletions(-)
+
+--- a/ld/Makefile.am
++++ b/ld/Makefile.am
+@@ -63,7 +63,7 @@
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ 
+ EMUL = @EMUL@
+ EMULATION_OFILES = @EMULATION_OFILES@
+--- a/ld/Makefile.in
++++ b/ld/Makefile.in
+@@ -572,7 +572,7 @@
+ # We put the scripts in the directory $(scriptdir)/ldscripts.
+ # We can't put the scripts in $(datadir) because the SEARCH_DIR
+ # directives need to be different for native and cross linkers.
+-scriptdir = $(tooldir)/lib
++scriptdir = $(libdir)
+ BASEDIR = $(srcdir)/..
+ BFDDIR = $(BASEDIR)/bfd
+ INCDIR = $(BASEDIR)/include

packages/binutils/2.34/0002-check_ldrunpath_length.patch

@@ -0,0 +1,24 @@
+---
+ ld/ldelf.c |    4 ++++
+ 1 file changed, 4 insertions(+)
+
+--- a/ld/ldelf.c
++++ b/ld/ldelf.c
+@@ -1229,6 +1229,8 @@
+ 		  && command_line.rpath == NULL)
+ 		{
+ 		  path = (const char *) getenv ("LD_RUN_PATH");
++		  if (path && *path == '\0')
++		    path = NULL;
+ 		  if (path
+ 		      && ldelf_search_needed (path, &n, force,
+ 					      is_linux, elfsize))
+@@ -1573,6 +1575,8 @@
+   rpath = command_line.rpath;
+   if (rpath == NULL)
+     rpath = (const char *) getenv ("LD_RUN_PATH");
++  if (rpath && *rpath == '\0')
++    rpath = NULL;
+ 
+   for (abfd = link_info.input_bfds; abfd; abfd = abfd->link.next)
+     if (bfd_get_flavour (abfd) == bfd_target_elf_flavour)

packages/binutils/2.34/0003-MinGW-w64-winpthreads-doesnt-have-pthread_mutexattr_settype.patch

@@ -0,0 +1,15 @@
+---
+ gold/gold-threads.cc |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/gold/gold-threads.cc
++++ b/gold/gold-threads.cc
+@@ -101,7 +101,7 @@
+   int err = pthread_mutexattr_init(&attr);
+   if (err != 0)
+     gold_fatal(_("pthead_mutexattr_init failed: %s"), strerror(err));
+-#ifdef PTHREAD_MUTEX_ADAPTIVE_NP
++#if defined(PTHREAD_MUTEX_ADAPTIVE_NP) && !defined(_WIN32)
+   err = pthread_mutexattr_settype(&attr, PTHREAD_MUTEX_ADAPTIVE_NP);
+   if (err != 0)
+     gold_fatal(_("pthread_mutexattr_settype failed: %s"), strerror(err));

packages/binutils/2.34/0004-Dont-link-to-libfl-as-its-unnecessary.patch

@@ -0,0 +1,105 @@
+---
+ binutils/configure    |    3 +++
+ binutils/configure.ac |    3 +++
+ gas/configure         |    3 +++
+ gas/configure.ac      |    3 +++
+ ld/configure          |    3 +++
+ ld/configure.ac       |    3 +++
+ 6 files changed, 18 insertions(+)
+
+--- a/binutils/configure
++++ b/binutils/configure
+@@ -12537,6 +12537,7 @@
+ done
+ test -n "$YACC" || YACC="yacc"
+ 
++save_LIBS=$LIBS
+ for ac_prog in flex lex
+ do
+   # Extract the first word of "$ac_prog", so it can be a program name with args.
+@@ -12700,6 +12701,8 @@
+ if test "$LEX" = :; then
+   LEX=${am_missing_run}flex
+ fi
++LIBS=$save_LIBS
++LEXLIB=
+ 
+ ALL_LINGUAS="bg ca da es fi fr hr id it ja pt ro ru rw sk sr sv tr uk vi zh_CN zh_TW"
+ # If we haven't got the data from the intl directory,
+--- a/binutils/configure.ac
++++ b/binutils/configure.ac
+@@ -89,7 +89,10 @@
+ fi
+ 
+ AC_PROG_YACC
++save_LIBS=$LIBS
+ AM_PROG_LEX
++LIBS=$save_LIBS
++LEXLIB=
+ 
+ ALL_LINGUAS="bg ca da es fi fr hr id it ja pt ro ru rw sk sr sv tr uk vi zh_CN zh_TW"
+ ZW_GNU_GETTEXT_SISTER_DIR
+--- a/gas/configure
++++ b/gas/configure
+@@ -13469,6 +13469,7 @@
+ done
+ test -n "$YACC" || YACC="yacc"
+ 
++save_LIBS=$LIBS
+ for ac_prog in flex lex
+ do
+   # Extract the first word of "$ac_prog", so it can be a program name with args.
+@@ -13632,6 +13633,8 @@
+ if test "$LEX" = :; then
+   LEX=${am_missing_run}flex
+ fi
++LIBS=$save_LIBS
++LEXLIB=
+ 
+ ALL_LINGUAS="es fi fr id ja ru rw sv tr uk zh_CN"
+ # If we haven't got the data from the intl directory,
+--- a/gas/configure.ac
++++ b/gas/configure.ac
+@@ -893,7 +893,10 @@
+ AC_DEFINE_UNQUOTED(TARGET_OS,		"${target_os}",    [Target OS.])
+ 
+ AC_PROG_YACC
++save_LIBS=$LIBS
+ AM_PROG_LEX
++LIBS=$save_LIBS
++LEXLIB=
+ 
+ ALL_LINGUAS="es fi fr id ja ru rw sv tr uk zh_CN"
+ ZW_GNU_GETTEXT_SISTER_DIR
+--- a/ld/configure
++++ b/ld/configure
+@@ -16542,6 +16542,7 @@
+ done
+ test -n "$YACC" || YACC="yacc"
+ 
++save_LIBS=$LIBS
+ for ac_prog in flex lex
+ do
+   # Extract the first word of "$ac_prog", so it can be a program name with args.
+@@ -16705,6 +16706,8 @@
+ if test "$LEX" = :; then
+   LEX=${am_missing_run}flex
+ fi
++LIBS=$save_LIBS
++LEXLIB=
+ 
+ 
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+--- a/ld/configure.ac
++++ b/ld/configure.ac
+@@ -243,7 +243,10 @@
+ AC_EXEEXT
+ 
+ AC_PROG_YACC
++save_LIBS=$LIBS
+ AM_PROG_LEX
++LIBS=$save_LIBS
++LEXLIB=
+ 
+ AM_MAINTAINER_MODE
+ AM_CONDITIONAL(GENINSRC_NEVER, false)

packages/binutils/2.34/0005-Darwin-gold-binary-cc-include-string-not-cstring.patch

@@ -0,0 +1,15 @@
+---
+ gold/binary.cc |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/gold/binary.cc
++++ b/gold/binary.cc
+@@ -23,7 +23,7 @@
+ #include "gold.h"
+ 
+ #include <cerrno>
+-#include <cstring>
++#include <string>
+ 
+ #include "elfcpp.h"
+ #include "stringpool.h"

packages/binutils/2.34/0006-Darwin-Two-fixes-from-Android-NDK-PTHREAD_ONCE_INIT-wcsncasecmp.patch

@@ -0,0 +1,70 @@
+From c39479f4ab4d372b518957871e1f205a03e7c3d6 Mon Sep 17 00:00:00 2001
+From: Andrew Hsieh <andrewhsieh@google.com>
+Date: Wed, 18 Mar 2015 10:57:24 +0800
+Subject: [PATCH] Fix darwin build
+
+1. In Drawin PTHREAD_ONCE_INIT is {0x30B1BCBA, {0}} and the GCC < 4.4
+   doesn't support ended initializer list
+2. wcsncasecmp doesn't exist in MacSDK10.6.x
+
+Change-Id: I69204a72f853f5263dffedc448379d75ed4eca2e
+---
+ bfd/peXXigen.c       |   22 ++++++++++++++++++++++
+ gold/gold-threads.cc |   15 ++++++++++++---
+ 2 files changed, 34 insertions(+), 3 deletions(-)
+
+--- a/bfd/peXXigen.c
++++ b/bfd/peXXigen.c
+@@ -3618,6 +3618,28 @@
+ }
+ #endif /* HAVE_WCHAR_H and not Cygwin/Mingw */
+ 
++#if defined __APPLE__ && __DARWIN_C_LEVEL < 200809L
++/* wcsncasecmp isn't always defined in Mac SDK */
++static int
++wcsncasecmp(const wchar_t *s1, const wchar_t *s2, size_t n)
++{
++  wchar_t c1, c2;
++
++  if (n == 0)
++    return (0);
++  for (; *s1; s1++, s2++)
++  {
++    c1 = towlower(*s1);
++    c2 = towlower(*s2);
++    if (c1 != c2)
++      return ((int)c1 - c2);
++    if (--n == 0)
++      return (0);
++  }
++  return (-*s2);
++}
++#endif
++
+ /* Perform a comparison of two entries.  */
+ static signed int
+ rsrc_cmp (bfd_boolean is_name, rsrc_entry * a, rsrc_entry * b)
+--- a/gold/gold-threads.cc
++++ b/gold/gold-threads.cc
+@@ -284,9 +284,18 @@
+ class Once_initialize
+ {
+  public:
+-  Once_initialize()
+-    : once_(PTHREAD_ONCE_INIT)
+-  { }
++   Once_initialize()
++#if !defined(__APPLE__)
++     : once_(PTHREAD_ONCE_INIT)
++   { }
++#else
++// In Drawin PTHREAD_ONCE_INIT is {0x30B1BCBA, {0}} and the GCC < 4.4 doesn't support
++// extended initializer list as above */
++   {
++     pthread_once_t once_2 = PTHREAD_ONCE_INIT;
++     once_ = once_2;
++   }
++#endif
+ 
+   // Return a pointer to the pthread_once_t variable.
+   pthread_once_t*

packages/binutils/2.34/0007-sysroot.patch

@@ -0,0 +1,41 @@
+Signed-off-by: Sven Rebhan <odinshorse@googlemail.com>
+
+Always try to prepend the sysroot prefix to absolute filenames first.
+
+http://bugs.gentoo.org/275666
+http://sourceware.org/bugzilla/show_bug.cgi?id=10340
+
+---
+ ld/ldfile.c |   11 +++++++++--
+ 1 file changed, 9 insertions(+), 2 deletions(-)
+
+--- a/ld/ldfile.c
++++ b/ld/ldfile.c
+@@ -339,18 +339,25 @@
+      directory first.  */
+   if (!entry->flags.maybe_archive)
+     {
+-      if (entry->flags.sysrooted && IS_ABSOLUTE_PATH (entry->filename))
++      /* For absolute pathnames, try to always open the file in the
++	 sysroot first. If this fails, try to open the file at the
++	 given location.  */
++      entry->flags.sysrooted = is_sysrooted_pathname (entry->filename);
++      if (!entry->flags.sysrooted && IS_ABSOLUTE_PATH (entry->filename)
++	  && ld_sysroot)
+ 	{
+ 	  char *name = concat (ld_sysroot, entry->filename,
+ 			       (const char *) NULL);
+ 	  if (ldfile_try_open_bfd (name, entry))
+ 	    {
+ 	      entry->filename = name;
++	      entry->flags.sysrooted = TRUE;
+ 	      return TRUE;
+ 	    }
+ 	  free (name);
+ 	}
+-      else if (ldfile_try_open_bfd (entry->filename, entry))
++
++      if (ldfile_try_open_bfd (entry->filename, entry))
+ 	return TRUE;
+ 
+       if (IS_ABSOLUTE_PATH (entry->filename))

packages/binutils/2.34/0008-poison-system-directories.patch

@@ -0,0 +1,279 @@
+Patch adapted to binutils 2.23.2 and extended to use
+BR_COMPILER_PARANOID_UNSAFE_PATH by Thomas Petazzoni.
+
+[Gustavo: adapt to binutils 2.25]
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
+
+Upstream-Status: Inappropriate [distribution: codesourcery]
+
+Patch originally created by Mark Hatle, forward-ported to
+binutils 2.21 by Scott Garman.
+
+purpose:  warn for uses of system directories when cross linking
+
+Code Merged from Sourcery G++ binutils 2.19 - 4.4-277
+
+2008-07-02  Joseph Myers  <joseph@codesourcery.com>
+
+    ld/
+    * ld.h (args_type): Add error_poison_system_directories.
+    * ld.texinfo (--error-poison-system-directories): Document.
+    * ldfile.c (ldfile_add_library_path): Check
+    command_line.error_poison_system_directories.
+    * ldmain.c (main): Initialize
+    command_line.error_poison_system_directories.
+    * lexsup.c (enum option_values): Add
+    OPTION_ERROR_POISON_SYSTEM_DIRECTORIES.
+    (ld_options): Add --error-poison-system-directories.
+    (parse_args): Handle new option.
+
+2007-06-13  Joseph Myers  <joseph@codesourcery.com>
+
+    ld/
+    * config.in: Regenerate.
+    * ld.h (args_type): Add poison_system_directories.
+    * ld.texinfo (--no-poison-system-directories): Document.
+    * ldfile.c (ldfile_add_library_path): Check
+    command_line.poison_system_directories.
+    * ldmain.c (main): Initialize
+    command_line.poison_system_directories.
+    * lexsup.c (enum option_values): Add
+    OPTION_NO_POISON_SYSTEM_DIRECTORIES.
+    (ld_options): Add --no-poison-system-directories.
+    (parse_args): Handle new option.
+
+2007-04-20  Joseph Myers  <joseph@codesourcery.com>
+
+    Merge from Sourcery G++ binutils 2.17:
+
+    2007-03-20  Joseph Myers  <joseph@codesourcery.com>
+    Based on patch by Mark Hatle <mark.hatle@windriver.com>.
+    ld/
+    * configure.ac (--enable-poison-system-directories): New option.
+    * configure, config.in: Regenerate.
+    * ldfile.c (ldfile_add_library_path): If
+    ENABLE_POISON_SYSTEM_DIRECTORIES defined, warn for use of /lib,
+    /usr/lib, /usr/local/lib or /usr/X11R6/lib.
+
+Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
+Signed-off-by: Scott Garman <scott.a.garman@intel.com>
+
+---
+ ld/config.in    |    3 +++
+ ld/configure    |   14 ++++++++++++++
+ ld/configure.ac |   10 ++++++++++
+ ld/ld.h         |    8 ++++++++
+ ld/ld.texi      |   12 ++++++++++++
+ ld/ldfile.c     |   17 +++++++++++++++++
+ ld/ldlex.h      |    2 ++
+ ld/ldmain.c     |    2 ++
+ ld/lexsup.c     |   21 +++++++++++++++++++++
+ 9 files changed, 89 insertions(+)
+
+--- a/ld/config.in
++++ b/ld/config.in
+@@ -31,6 +31,9 @@
+    language is requested. */
+ #undef ENABLE_NLS
+ 
++/* Define to warn for use of native system library directories */
++#undef ENABLE_POISON_SYSTEM_DIRECTORIES
++
+ /* Additional extension a shared object might have. */
+ #undef EXTRA_SHLIB_EXTENSION
+ 
+--- a/ld/configure
++++ b/ld/configure
+@@ -826,6 +826,7 @@
+ enable_targets
+ enable_64_bit_bfd
+ with_sysroot
++enable_poison_system_directories
+ enable_gold
+ enable_got
+ enable_compressed_debug_sections
+@@ -1491,6 +1492,8 @@
+   --disable-largefile     omit support for large files
+   --enable-targets        alternative target configurations
+   --enable-64-bit-bfd     64-bit support (on hosts with narrower word sizes)
++  --enable-poison-system-directories
++                          warn for use of native system library directories
+   --enable-gold[=ARG]     build gold [ARG={default,yes,no}]
+   --enable-got=<type>     GOT handling scheme (target, single, negative,
+                           multigot)
+@@ -15809,7 +15812,18 @@
+ fi
+ 
+ 
++# Check whether --enable-poison-system-directories was given.
++if test "${enable_poison_system_directories+set}" = set; then :
++  enableval=$enable_poison_system_directories;
++else
++  enable_poison_system_directories=no
++fi
++
++if test "x${enable_poison_system_directories}" = "xyes"; then
+ 
++$as_echo "#define ENABLE_POISON_SYSTEM_DIRECTORIES 1" >>confdefs.h
++
++fi
+ 
+ # Check whether --enable-got was given.
+ if test "${enable_got+set}" = set; then :
+--- a/ld/configure.ac
++++ b/ld/configure.ac
+@@ -94,6 +94,16 @@
+ AC_SUBST(TARGET_SYSTEM_ROOT)
+ AC_SUBST(TARGET_SYSTEM_ROOT_DEFINE)
+ 
++AC_ARG_ENABLE([poison-system-directories],
++         AS_HELP_STRING([--enable-poison-system-directories],
++                [warn for use of native system library directories]),,
++         [enable_poison_system_directories=no])
++if test "x${enable_poison_system_directories}" = "xyes"; then
++  AC_DEFINE([ENABLE_POISON_SYSTEM_DIRECTORIES],
++       [1],
++       [Define to warn for use of native system library directories])
++fi
++
+ dnl Use --enable-gold to decide if this linker should be the default.
+ dnl "install_as_default" is set to false if gold is the default linker.
+ dnl "installed_linker" is the installed BFD linker name.
+--- a/ld/ld.h
++++ b/ld/ld.h
+@@ -161,6 +161,14 @@
+   /* If set, display the target memory usage (per memory region).  */
+   bfd_boolean print_memory_usage;
+ 
++  /* If TRUE (the default) warn for uses of system directories when
++     cross linking.  */
++  bfd_boolean poison_system_directories;
++
++  /* If TRUE (default FALSE) give an error for uses of system
++     directories when cross linking instead of a warning.  */
++  bfd_boolean error_poison_system_directories;
++
+   /* Should we force section groups to be resolved?  Controlled with
+      --force-group-allocation on the command line or FORCE_GROUP_ALLOCATION
+      in the linker script.  */
+--- a/ld/ld.texi
++++ b/ld/ld.texi
+@@ -2551,6 +2551,18 @@
+ 
+ Passing @code{none} for @var{style} disables the setting from any
+ @code{--build-id} options earlier on the command line.
++
++@kindex --no-poison-system-directories
++@item --no-poison-system-directories
++Do not warn for @option{-L} options using system directories such as
++@file{/usr/lib} when cross linking.  This option is intended for use
++in chroot environments when such directories contain the correct
++libraries for the target system rather than the host.
++
++@kindex --error-poison-system-directories
++@item --error-poison-system-directories
++Give an error instead of a warning for @option{-L} options using
++system directories when cross linking.
+ @end table
+ 
+ @c man end
+--- a/ld/ldfile.c
++++ b/ld/ldfile.c
+@@ -117,6 +117,23 @@
+     new_dirs->name = concat (ld_sysroot, name + strlen ("$SYSROOT"), (const char *) NULL);
+   else
+     new_dirs->name = xstrdup (name);
++
++#ifdef ENABLE_POISON_SYSTEM_DIRECTORIES
++  if (command_line.poison_system_directories
++  && ((!strncmp (name, "/lib", 4))
++      || (!strncmp (name, "/usr/lib", 8))
++      || (!strncmp (name, "/usr/local/lib", 14))
++      || (!strncmp (name, "/usr/X11R6/lib", 14))))
++   {
++     if (command_line.error_poison_system_directories)
++       einfo (_("%X%P: error: library search path \"%s\" is unsafe for "
++            "cross-compilation\n"), name);
++     else
++       einfo (_("%P: warning: library search path \"%s\" is unsafe for "
++            "cross-compilation\n"), name);
++   }
++#endif
++
+ }
+ 
+ /* Try to open a BFD for a lang_input_statement.  */
+--- a/ld/ldlex.h
++++ b/ld/ldlex.h
+@@ -150,6 +150,8 @@
+   OPTION_FORCE_GROUP_ALLOCATION,
+   OPTION_PRINT_MAP_DISCARDED,
+   OPTION_NO_PRINT_MAP_DISCARDED,
++  OPTION_NO_POISON_SYSTEM_DIRECTORIES,
++  OPTION_ERROR_POISON_SYSTEM_DIRECTORIES,
+ };
+ 
+ /* The initial parser states.  */
+--- a/ld/ldmain.c
++++ b/ld/ldmain.c
+@@ -273,6 +273,8 @@
+   command_line.warn_mismatch = TRUE;
+   command_line.warn_search_mismatch = TRUE;
+   command_line.check_section_addresses = -1;
++  command_line.poison_system_directories = TRUE;
++  command_line.error_poison_system_directories = FALSE;
+ 
+   /* We initialize DEMANGLING based on the environment variable
+      COLLECT_NO_DEMANGLE.  The gcc collect2 program will demangle the
+--- a/ld/lexsup.c
++++ b/ld/lexsup.c
+@@ -550,6 +550,14 @@
+   { {"no-print-map-discarded", no_argument, NULL, OPTION_NO_PRINT_MAP_DISCARDED},
+     '\0', NULL, N_("Do not show discarded sections in map file output"),
+     TWO_DASHES },
++  { {"no-poison-system-directories", no_argument, NULL,
++    OPTION_NO_POISON_SYSTEM_DIRECTORIES},
++    '\0', NULL, N_("Do not warn for -L options using system directories"),
++    TWO_DASHES },
++  { {"error-poison-system-directories", no_argument, NULL,
++    OPTION_ERROR_POISON_SYSTEM_DIRECTORIES},
++    '\0', NULL, N_("Give an error for -L options using system directories"),
++    TWO_DASHES },
+ };
+ 
+ #define OPTION_COUNT ARRAY_SIZE (ld_options)
+@@ -562,6 +570,7 @@
+   int ingroup = 0;
+   char *default_dirlist = NULL;
+   char *shortopts;
++  char *BR_paranoid_env;
+   struct option *longopts;
+   struct option *really_longopts;
+   int last_optind;
+@@ -1562,6 +1571,14 @@
+ 	  }
+ 	  break;
+ 
++	case OPTION_NO_POISON_SYSTEM_DIRECTORIES:
++	  command_line.poison_system_directories = FALSE;
++	  break;
++
++	case OPTION_ERROR_POISON_SYSTEM_DIRECTORIES:
++	  command_line.error_poison_system_directories = TRUE;
++	  break;
++
+ 	case OPTION_PUSH_STATE:
+ 	  input_flags.pushed = xmemdup (&input_flags,
+ 					sizeof (input_flags),
+@@ -1613,6 +1630,10 @@
+       command_line.soname = NULL;
+     }
+ 
++  BR_paranoid_env = getenv("BR_COMPILER_PARANOID_UNSAFE_PATH");
++  if (BR_paranoid_env && strlen(BR_paranoid_env) > 0)
++    command_line.error_poison_system_directories = TRUE;
++
+   while (ingroup)
+     {
+       einfo (_("%P: missing --end-group; added as last command line option\n"));

packages/binutils/2.34/chksum

@@ -0,0 +1,12 @@
+md5 binutils-2.34.tar.xz 664ec3a2df7805ed3464639aaae332d6
+sha1 binutils-2.34.tar.xz 78f7ba4c0775ae75f5b906dc9af03d70b39b0785
+sha256 binutils-2.34.tar.xz f00b0e8803dc9bab1e2165bd568528135be734df3fabf8d0161828cd56028952
+sha512 binutils-2.34.tar.xz 2c7976939dcf5e8c5b7374cccd39bfe803b1bec73c6abfa0eb17c24e1942574c6bdb874c66a092a82adc443182eacd8a5a8001c19a76101f0c7ba40c27de0bbd
+md5 binutils-2.34.tar.bz2 b0afc4d29db31ee6fdf3ebc34e85e482
+sha1 binutils-2.34.tar.bz2 361566c9ab5e90bd847d06f46fb9f18ec6c3ecf0
+sha256 binutils-2.34.tar.bz2 89f010078b6cf69c23c27897d686055ab89b198dddf819efb0a4f2c38a0b36e6
+sha512 binutils-2.34.tar.bz2 f47e7304e102c7bbc97958a08093e27796b9051d1567ce4fbb723d39ef3e29efa325ee14a1bdcc462a925a7f9bbbc9aee28294c6dc23850f371030f3835a8067
+md5 binutils-2.34.tar.gz 079f3414a4c2b8f58e05acfd03b57355
+sha1 binutils-2.34.tar.gz e3bb308fc718b1a6117e4fe6c43f05f5cf6f7f05
+sha256 binutils-2.34.tar.gz 53537d334820be13eeb8acb326d01c7c81418772d626715c7ae927a7d401cab3
+sha512 binutils-2.34.tar.gz bacd76767e62ca81fb1ce00a4d0563a379401f6fbe679489344c89baf62399fa36495242d9284595738437416426ce7a27689490fbcfdb7daef89f2d0ff4827b

packages/elf2flt/git-453398f9/0000-support-binutils-2.34.patch

@@ -0,0 +1,447 @@
+From fa0e77afba7d8d4107af5f8ddc8d38d23c3dd19d Mon Sep 17 00:00:00 2001
+From: Romain Naour <romain.naour@smile.fr>
+Date: Wed, 5 Feb 2020 10:31:32 +0100
+Subject: [PATCH] elf2flt: handle binutils >= 2.34
+
+The latest Binutils release (2.34) is not compatible with elf2flt due
+to a change in bfd_section_* macros. The issue has been reported to
+the Binutils mailing list but Alan Modra recommend to bundle libbfd
+library sources into each projects using it [1]. That's because the
+API is not stable over the time without any backward compatibility
+guaranties.
+
+On the other hand, the elf2flt tools needs to support modified
+version of binutils for specific arch/target [2].
+
+Add two tests in the configure script to detect this API change
+in order to support binutils < 2.34 and binutils >= 2.34.
+
+[1] https://sourceware.org/ml/binutils/2020-02/msg00044.html
+[2] https://github.com/uclinux-dev/elf2flt/issues/14
+
+Signed-off-by: Romain Naour <romain.naour@smile.fr>
+---
+ configure.ac | 25 ++++++++++++++++
+ elf2flt.c    | 81 +++++++++++++++++++++++++++++-----------------------
+ 2 files changed, 71 insertions(+), 35 deletions(-)
+
+[Added: regenerated configure]
+diff --git a/configure.ac b/configure.ac
+index d6b4119..caae869 100644
+--- a/configure.ac
++++ b/configure.ac
+@@ -212,6 +212,31 @@ AC_CHECK_FUNCS([ \
+ 	strsignal \
+ ])
+ 
++dnl Various bfd section macros and functions like bfd_section_size() has been
++dnl modified starting binutils >= 2.34.
++dnl Check if the prototype is "bfd_section_size (sec)" or "bfd_section_size(bfd, ptr)"
++if test "$binutils_build_dir" != "NONE"; then
++    CFLAGS="-I$binutils_include_dir -I$bfd_include_dir $CFLAGS"
++fi
++
++AC_TRY_COMPILE([#include <bfd.h>],
++ [const asection *sec; bfd_section_size(sec);],
++ bfd_section_size_macro_has_one_arg=yes,
++ bfd_section_size_macro_has_one_arg=no)
++if test "$bfd_section_size_macro_has_one_arg" = "yes" ; then
++  AC_DEFINE(HAVE_BFD_SECTION_SIZE_MACRO_HAS_ONE_ARG, 1,
++   [define to 1 for binutils >= 2.34])
++fi
++
++AC_TRY_COMPILE([#include <bfd.h>],
++ [const asection *sec; bfd_section_vma(sec);],
++ bfd_section_vma_macro_has_one_arg=yes,
++ bfd_section_vma_macro_has_one_arg=no)
++if test "$bfd_section_vma_macro_has_one_arg" = "yes" ; then
++  AC_DEFINE(HAVE_BFD_SECTION_VMA_MACRO_HAS_ONE_ARG, 1,
++   [define to 1 for binutils >= 2.34])
++fi
++
+ if test "$GCC" = yes ; then
+ 	CFLAGS="-Wall $CFLAGS"
+ 	if test "$werror" = 1 ; then
+diff --git a/elf2flt.c b/elf2flt.c
+index b7c4a49..8dbd9b2 100644
+--- a/elf2flt.c
++++ b/elf2flt.c
+@@ -149,6 +149,17 @@ const char *elf2flt_progname;
+ #define O_BINARY 0
+ #endif
+ 
++#if defined(HAVE_BFD_SECTION_SIZE_MACRO_HAS_ONE_ARG)
++#define elf2flt_bfd_section_size(abs_bfd, s) bfd_section_size(s)
++#else
++#define elf2flt_bfd_section_size(abs_bfd, s) bfd_section_size(abs_bfd, s)
++#endif
++
++#if defined(HAVE_BFD_SECTION_VMA_MACRO_HAS_ONE_ARG)
++#define elf2flt_bfd_section_vma(abs_bfd, s)  bfd_section_vma(s)
++#else
++#define elf2flt_bfd_section_vma(abs_bfd, s)  bfd_section_vma(abs_bfd, s)
++#endif
+ 
+ /* Extra output when running.  */
+ static int verbose = 0;
+@@ -323,9 +334,9 @@ compare_relocs (const void *pa, const void *pb)
+ 	else if (!rb->sym_ptr_ptr || !*rb->sym_ptr_ptr)
+ 		return 1;
+ 
+-	a_vma = bfd_section_vma(compare_relocs_bfd,
++	a_vma = elf2flt_bfd_section_vma(compare_relocs_bfd,
+ 				(*(ra->sym_ptr_ptr))->section);
+-	b_vma = bfd_section_vma(compare_relocs_bfd,
++	b_vma = elf2flt_bfd_section_vma(compare_relocs_bfd,
+ 				(*(rb->sym_ptr_ptr))->section);
+ 	va = (*(ra->sym_ptr_ptr))->value + a_vma + ra->addend;
+ 	vb = (*(rb->sym_ptr_ptr))->value + b_vma + rb->addend;
+@@ -403,7 +414,7 @@ output_relocs (
+   }
+ 
+   for (a = abs_bfd->sections; (a != (asection *) NULL); a = a->next) {
+-  	section_vma = bfd_section_vma(abs_bfd, a);
++	section_vma = elf2flt_bfd_section_vma(abs_bfd, a);
+ 
+ 	if (verbose)
+ 		printf("SECTION: %s [%p]: flags=0x%x vma=0x%"PRIx32"\n",
+@@ -442,7 +453,7 @@ output_relocs (
+ 	  continue;
+ 	if (verbose)
+ 	  printf(" RELOCS: %s [%p]: flags=0x%x vma=0x%"BFD_VMA_FMT"x\n",
+-			r->name, r, r->flags, bfd_section_vma(abs_bfd, r));
++			r->name, r, r->flags, elf2flt_bfd_section_vma(abs_bfd, r));
+   	if ((r->flags & SEC_RELOC) == 0)
+   	  continue;
+ 	relsize = bfd_get_reloc_upper_bound(rel_bfd, r);
+@@ -674,7 +685,7 @@ output_relocs (
+ 				case R_BFIN_RIMM16:
+ 				case R_BFIN_LUIMM16:
+ 				case R_BFIN_HUIMM16:
+-				    sym_vma = bfd_section_vma(abs_bfd, sym_section);
++				    sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 				    sym_addr += sym_vma + q->addend;
+ 
+ 				    if (weak_und_symbol(sym_section->name, (*(q->sym_ptr_ptr))))
+@@ -707,7 +718,7 @@ output_relocs (
+ 				    break;
+ 
+ 				case R_BFIN_BYTE4_DATA:
+-				    sym_vma = bfd_section_vma(abs_bfd, sym_section);
++				    sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 				    sym_addr += sym_vma + q->addend;
+ 
+ 				    if (weak_und_symbol (sym_section->name, (*(q->sym_ptr_ptr))))
+@@ -851,7 +862,7 @@ output_relocs (
+ #if defined(TARGET_m68k)
+ 				case R_68K_32:
+ 					relocation_needed = 1;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_68K_PC16:
+@@ -876,7 +887,7 @@ output_relocs (
+ 							q->address, sym_addr,
+ 							(*p)->howto->rightshift,
+ 							*(uint32_t *)r_mem);
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_ARM_GOT32:
+@@ -904,7 +915,7 @@ output_relocs (
+ #ifdef TARGET_v850
+ 				case R_V850_ABS32:
+ 					relocation_needed = 1;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_V850_ZDA_16_16_OFFSET:
+@@ -926,7 +937,7 @@ output_relocs (
+ 					sym_addr = (*(q->sym_ptr_ptr))->value;
+ 					q->address -= 1;
+ 					r_mem -= 1; /* tracks q->address */
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					sym_addr |= (*(unsigned char *)r_mem<<24);
+ 					break;
+@@ -939,7 +950,7 @@ output_relocs (
+ 					/* Absolute symbol done not relocation */
+ 					relocation_needed = !bfd_is_abs_section(sym_section);
+ 					sym_addr = (*(q->sym_ptr_ptr))->value;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_H8_DIR32:
+@@ -952,7 +963,7 @@ output_relocs (
+ 					}
+ 					relocation_needed = 1;
+ 					sym_addr = (*(q->sym_ptr_ptr))->value;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_H8_PCREL16:
+@@ -985,7 +996,7 @@ output_relocs (
+ 					pflags=0x80000000;
+ 
+ 					/* work out the relocation */
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					/* Write relocated pointer back */
+ 					p[2] = (sym_addr >> 24) & 0xff;
+@@ -1001,7 +1012,7 @@ output_relocs (
+ 					relocation_needed = 0;
+ 					pflags = 0;
+ 			sprintf(&addstr[0], "+0x%ld", sym_addr - (*(q->sym_ptr_ptr))->value -
+-					 bfd_section_vma(abs_bfd, sym_section));
++					 elf2flt_bfd_section_vma(abs_bfd, sym_section));
+ 			if (verbose)
+ 				printf("  RELOC[%d]: offset=0x%"BFD_VMA_FMT"x symbol=%s%s "
+ 					"section=%s size=%d "
+@@ -1017,7 +1028,7 @@ output_relocs (
+ 					continue;
+ 				}
+ 				case R_MICROBLAZE_32:
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					relocation_needed = 1;
+ 					break;
+@@ -1042,7 +1053,7 @@ output_relocs (
+ 				case R_NIOS2_BFD_RELOC_32:
+ 					relocation_needed = 1;
+ 					pflags = (FLAT_NIOS2_R_32 << 28);
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					/* modify target, in target order */
+ 					*(unsigned long *)r_mem = htoniosl(sym_addr);
+@@ -1052,7 +1063,7 @@ output_relocs (
+ 					unsigned long exist_val;
+ 					relocation_needed = 1;
+ 					pflags = (FLAT_NIOS2_R_CALL26 << 28);
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					
+ 					/* modify target, in target order */
+@@ -1083,7 +1094,7 @@ output_relocs (
+ 								? FLAT_NIOS2_R_HIADJ_LO : FLAT_NIOS2_R_HI_LO;
+ 							pflags <<= 28;
+ 						
+-							sym_vma = bfd_section_vma(abs_bfd, sym_section);
++							sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 							sym_addr += sym_vma + q->addend;
+ 
+ 							/* modify high 16 bits, in target order */
+@@ -1116,7 +1127,7 @@ output_relocs (
+ 						goto NIOS2_RELOC_ERR;
+ 					}
+ 					/* _gp holds a absolute value, otherwise the ld cannot generate correct code */
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					//printf("sym=%x, %d, _gp=%x, %d\n", sym_addr+sym_vma, sym_addr+sym_vma, gp, gp);
+ 					sym_addr += sym_vma + q->addend;
+ 					sym_addr -= gp;
+@@ -1197,7 +1208,7 @@ output_relocs (
+ 				case R_SPARC_32:
+ 				case R_SPARC_UA32:
+ 					relocation_needed = 1;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_SPARC_PC22:
+@@ -1216,7 +1227,7 @@ output_relocs (
+ 				case R_SPARC_HI22:
+ 					relocation_needed = 1;
+ 					pflags = 0x80000000;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					sym_addr |= (
+ 						htonl(*(uint32_t *)r_mem)
+@@ -1226,7 +1237,7 @@ output_relocs (
+ 				case R_SPARC_LO10:
+ 					relocation_needed = 1;
+ 					pflags = 0x40000000;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					sym_addr &= 0x000003ff;
+ 					sym_addr |= (
+@@ -1240,7 +1251,7 @@ output_relocs (
+ #ifdef TARGET_sh
+ 				case R_SH_DIR32:
+ 					relocation_needed = 1;
+-					sym_vma = bfd_section_vma(abs_bfd, sym_section);
++					sym_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 					sym_addr += sym_vma + q->addend;
+ 					break;
+ 				case R_SH_REL32:
+@@ -1272,7 +1283,7 @@ output_relocs (
+ 				case R_E1_CONST31:
+ 						relocation_needed = 1;
+ 						DBG_E1("Handling Reloc <CONST31>\n");
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
+ 										sec_vma, sym_addr, q->address);
+ 						sym_addr = sec_vma + sym_addr;
+@@ -1287,7 +1298,7 @@ output_relocs (
+ 						relocation_needed = 0;
+ 						DBG_E1("Handling Reloc <CONST31_PCREL>\n");
+ 						DBG_E1("DONT RELOCATE AT LOADING\n");
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
+ 										sec_vma, sym_addr, q->address);
+ 						sym_addr =  sec_vma + sym_addr;
+@@ -1314,7 +1325,7 @@ output_relocs (
+ 						relocation_needed = 0;
+ 						DBG_E1("Handling Reloc <DIS29W_PCREL>\n");
+ 						DBG_E1("DONT RELOCATE AT LOADING\n");
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x], q->address : [0x%x]\n",
+ 										sec_vma, sym_addr, q->address);
+ 						sym_addr =  sec_vma + sym_addr;
+@@ -1347,7 +1358,7 @@ output_relocs (
+ 						DBG_E1("Handling Reloc <DIS29B>\n");
+ DIS29_RELOCATION:
+ 						relocation_needed = 1;
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%08x]\n",
+ 										sec_vma, sym_addr);
+ 						sym_addr =  sec_vma + sym_addr;
+@@ -1364,7 +1375,7 @@ output_relocs (
+ 						relocation_needed = 0;
+ 						DBG_E1("Handling Reloc <IMM32_PCREL>\n");
+ 						DBG_E1("DONT RELOCATE AT LOADING\n");
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
+ 										sec_vma, sym_addr);
+ 						sym_addr =  sec_vma + sym_addr;
+@@ -1390,7 +1401,7 @@ output_relocs (
+ 				case R_E1_IMM32:
+ 						relocation_needed = 1;
+ 						DBG_E1("Handling Reloc <IMM32>\n");
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
+ 										sec_vma, sym_addr);
+ 						sym_addr =  sec_vma + sym_addr;
+@@ -1406,7 +1417,7 @@ output_relocs (
+ 				case R_E1_WORD:
+ 						relocation_needed = 1;
+ 						DBG_E1("Handling Reloc <WORD>\n");
+-						sec_vma = bfd_section_vma(abs_bfd, sym_section);
++						sec_vma = elf2flt_bfd_section_vma(abs_bfd, sym_section);
+ 						DBG_E1("sec_vma : [0x%x], sym_addr : [0x%x]\n",
+ 										sec_vma, sym_addr);
+ 						sym_addr =  sec_vma + sym_addr;
+@@ -1433,7 +1444,7 @@ output_relocs (
+ 			}
+ 
+ 			sprintf(&addstr[0], "+0x%lx", sym_addr - (*(q->sym_ptr_ptr))->value -
+-					 bfd_section_vma(abs_bfd, sym_section));
++					 elf2flt_bfd_section_vma(abs_bfd, sym_section));
+ 
+ 
+ 			/*
+@@ -1873,8 +1884,8 @@ int main(int argc, char *argv[])
+     } else
+       continue;
+ 
+-    sec_size = bfd_section_size(abs_bfd, s);
+-    sec_vma  = bfd_section_vma(abs_bfd, s);
++    sec_size = elf2flt_bfd_section_size(abs_bfd, s);
++    sec_vma  = elf2flt_bfd_section_vma(abs_bfd, s);
+ 
+     if (sec_vma < *vma) {
+       if (*len > 0)
+@@ -1899,7 +1910,7 @@ int main(int argc, char *argv[])
+     if (s->flags & SEC_CODE) 
+       if (!bfd_get_section_contents(abs_bfd, s,
+ 				   text + (s->vma - text_vma), 0,
+-				   bfd_section_size(abs_bfd, s)))
++				   elf2flt_bfd_section_size(abs_bfd, s)))
+       {
+ 	fatal("read error section %s", s->name);
+       }
+@@ -1925,7 +1936,7 @@ int main(int argc, char *argv[])
+     if (s->flags & SEC_DATA) 
+       if (!bfd_get_section_contents(abs_bfd, s,
+ 				   data + (s->vma - data_vma), 0,
+-				   bfd_section_size(abs_bfd, s)))
++				   elf2flt_bfd_section_size(abs_bfd, s)))
+       {
+ 	fatal("read error section %s", s->name);
+       }
+--- elf2flt-git-453398f9.orig/configure	2020-02-23 19:11:22.383955320 -0800
++++ elf2flt-git-453398f9/configure	2020-02-23 19:13:08.667951575 -0800
+@@ -4310,6 +4310,56 @@
+ done
+ 
+ 
++if test "$binutils_build_dir" != "NONE"; then
++    CFLAGS="-I$binutils_include_dir -I$bfd_include_dir $CFLAGS"
++fi
++
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <bfd.h>
++int
++main ()
++{
++const asection *sec; bfd_section_size(sec);
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++  bfd_section_size_macro_has_one_arg=yes
++else
++  bfd_section_size_macro_has_one_arg=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++if test "$bfd_section_size_macro_has_one_arg" = "yes" ; then
++
++$as_echo "#define HAVE_BFD_SECTION_SIZE_MACRO_HAS_ONE_ARG 1" >>confdefs.h
++
++fi
++
++cat confdefs.h - <<_ACEOF >conftest.$ac_ext
++/* end confdefs.h.  */
++#include <bfd.h>
++int
++main ()
++{
++const asection *sec; bfd_section_vma(sec);
++  ;
++  return 0;
++}
++_ACEOF
++if ac_fn_c_try_compile "$LINENO"; then :
++  bfd_section_vma_macro_has_one_arg=yes
++else
++  bfd_section_vma_macro_has_one_arg=no
++fi
++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext
++if test "$bfd_section_vma_macro_has_one_arg" = "yes" ; then
++
++$as_echo "#define HAVE_BFD_SECTION_VMA_MACRO_HAS_ONE_ARG 1" >>confdefs.h
++
++fi
++
+ if test "$GCC" = yes ; then
+ 	CFLAGS="-Wall $CFLAGS"
+ 	if test "$werror" = 1 ; then

packages/elf2flt/package.desc

@@ -1,2 +1,2 @@
 repository='git https://github.com/uclinux-dev/elf2flt.git'
-repository_cset='73325b7f209e0f68887333385184af275531427d'
+repository_cset='453398f917d167f8c308c8f997270c48ae8f8b12'

packages/gdb/9.1/0000-musl_fix.patch

@@ -0,0 +1,33 @@
+---
+ gdb/linux-nat.c |    5 +++++
+ gdb/stopcode.h  |    4 ++++
+ 2 files changed, 9 insertions(+)
+
+--- a/gdb/linux-nat.c
++++ b/gdb/linux-nat.c
+@@ -17,6 +17,7 @@
+    You should have received a copy of the GNU General Public License
+    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
+ 
++#include "stopcode.h"
+ #include "defs.h"
+ #include "inferior.h"
+ #include "infrun.h"
+@@ -69,6 +70,10 @@
+ #include "gdbsupport/scope-exit.h"
+ #include "gdbsupport/gdb-sigmask.h"
+ 
++#ifndef __SIGRTMIN
++#define __SIGRTMIN SIGRTMIN
++#endif
++
+ /* This comment documents high-level logic of this file.
+ 
+ Waiting for events in sync mode
+--- /dev/null
++++ b/gdb/stopcode.h
+@@ -0,0 +1,4 @@
++#ifndef W_STOPCODE
++#define W_STOPCODE(sig) ((sig) << 8 | 0x7f)
++#endif
++

packages/gdb/9.1/0001-uclibc-no-gettimeofday-clobber.patch

@@ -0,0 +1,33 @@
+Improve gnulib in gdb's guess work, gettimeofday() works in uClibcm promise.
+
+This patch helps building x86_64-unknown-linux-uclibc toolchains, the final
+gdb-native step otherwise fails when linking the libinproctrace.so
+
+Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
+Signed-off-by: Alexey Neyman <stilor@att.net>
+
+---
+ gnulib/configure                 |    1 +
+ gnulib/import/m4/gettimeofday.m4 |    1 +
+ 2 files changed, 2 insertions(+)
+
+--- a/gnulib/configure
++++ b/gnulib/configure
+@@ -20267,6 +20267,7 @@
+       case "$host_os" in
+                 # Guess all is fine on glibc systems.
+         *-gnu*) gl_cv_func_gettimeofday_clobber="guessing no" ;;
++        *-uclibc*) gl_cv_func_gettimeofday_clobber="guessing no" ;;
+                 # If we don't know, assume the worst.
+         *)      gl_cv_func_gettimeofday_clobber="guessing yes" ;;
+       esac
+--- a/gnulib/import/m4/gettimeofday.m4
++++ b/gnulib/import/m4/gettimeofday.m4
+@@ -111,6 +111,7 @@
+       case "$host_os" in
+                 # Guess all is fine on glibc systems.
+         *-gnu*) gl_cv_func_gettimeofday_clobber="guessing no" ;;
++        *-uclibc*) gl_cv_func_gettimeofday_clobber="guessing no" ;;
+                 # If we don't know, assume the worst.
+         *)      gl_cv_func_gettimeofday_clobber="guessing yes" ;;
+       esac

packages/gdb/9.1/0002-xtensa-make-sure-ar_base-is-initialized.patch

@@ -0,0 +1,30 @@
+From 208ea73d38c9c16cf983b6419f58050dbadcb6a9 Mon Sep 17 00:00:00 2001
+From: Max Filippov <jcmvbkbc@gmail.com>
+Date: Sun, 7 Jun 2015 22:43:49 +0300
+Subject: [PATCH 2/2] xtensa: make sure ar_base is initialized
+
+ar_base is uninitialized for cores w/o windowed registers as their
+regmap doesn't have register 0x0100.
+Check that ar_base is initialized and if not initialize it with a0_base.
+
+gdb/
+	* xtensa-tdep.c (xtensa_derive_tdep): Make sure ar_base is
+	initialized.
+
+Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
+---
+ gdb/xtensa-tdep.c |    3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/gdb/xtensa-tdep.c
++++ b/gdb/xtensa-tdep.c
+@@ -3137,6 +3137,9 @@
+   if (tdep->num_regs == 0)
+     tdep->num_regs = tdep->num_nopriv_regs;
+ 
++  if (tdep->ar_base == -1)
++    tdep->ar_base = tdep->a0_base;
++
+   /* Number of pseudo registers.  */
+   tdep->num_pseudo_regs = n - tdep->num_regs;
+ 

packages/gdb/9.1/0003-WIP-end-of-prologue-detection-hack.patch

@@ -0,0 +1,26 @@
+From 7f8eacbb468575fb67db7fd1155a3aedaa91911b Mon Sep 17 00:00:00 2001
+From: Max Filippov <jcmvbkbc@gmail.com>
+Date: Sun, 7 Jun 2015 23:15:39 +0300
+Subject: [PATCH] WIP: *end of prologue* detection hack
+
+see
+  http://www.esp8266.com/viewtopic.php?p=18461#p18461
+  http://www.esp8266.com/viewtopic.php?p=19026#p19026
+  http://www.esp8266.com/viewtopic.php?p=19683#p19683
+
+Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
+---
+ gdb/xtensa-tdep.c |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/gdb/xtensa-tdep.c
++++ b/gdb/xtensa-tdep.c
+@@ -2385,7 +2385,7 @@
+   /* Find out, if we have an information about the prologue from DWARF.  */
+   prologue_sal = find_pc_line (start, 0);
+   if (prologue_sal.line != 0) /* Found debug info.  */
+-    body_pc = prologue_sal.end;
++    body_pc = prologue_sal.end + 40;
+ 
+   /* If we are going to analyze the prologue in general without knowing about
+      the current PC, make the best assumption for the end of the prologue.  */

packages/gdb/9.1/0004-allow-android.patch

@@ -0,0 +1,45 @@
+---
+ gdb/gdbserver/configure    |   11 -----------
+ gdb/gdbserver/configure.ac |   11 -----------
+ 2 files changed, 22 deletions(-)
+
+--- a/gdb/gdbserver/configure
++++ b/gdb/gdbserver/configure
+@@ -8512,17 +8512,6 @@
+ 
+ 
+ case "${target}" in
+-  *-android*)
+-    # Starting with NDK version 9, <elf.h> actually includes definitions
+-    # of Elf32_auxv_t and Elf64_auxv_t. But sadly, <elf.h> includes
+-    # <sys/exec_elf.h> which defines some of the ELF types incorrectly,
+-    # leading to conflicts with the defintions from <linux/elf.h>.
+-    # This makes it impossible for us to include both <elf.h> and
+-    # <linux/elf.h>, which means that, in practice, we do not have
+-    # access to Elf32_auxv_t and Elf64_auxv_t on this platform.
+-    # Therefore, do not try to auto-detect availability, as it would
+-    # get it wrong on this platform.
+-    ;;
+   *)
+     ac_fn_c_check_type "$LINENO" "Elf32_auxv_t" "ac_cv_type_Elf32_auxv_t" "#include <elf.h>
+ 
+--- a/gdb/gdbserver/configure.ac
++++ b/gdb/gdbserver/configure.ac
+@@ -176,17 +176,6 @@
+ ])
+ 
+ case "${target}" in
+-  *-android*)
+-    # Starting with NDK version 9, <elf.h> actually includes definitions
+-    # of Elf32_auxv_t and Elf64_auxv_t. But sadly, <elf.h> includes
+-    # <sys/exec_elf.h> which defines some of the ELF types incorrectly,
+-    # leading to conflicts with the defintions from <linux/elf.h>.
+-    # This makes it impossible for us to include both <elf.h> and
+-    # <linux/elf.h>, which means that, in practice, we do not have
+-    # access to Elf32_auxv_t and Elf64_auxv_t on this platform.
+-    # Therefore, do not try to auto-detect availability, as it would
+-    # get it wrong on this platform.
+-    ;;
+   *)
+     AC_CHECK_TYPES([Elf32_auxv_t, Elf64_auxv_t], [], [],
+     #include <elf.h>

packages/gdb/9.1/chksum

@@ -0,0 +1,8 @@
+md5 gdb-9.1.tar.xz f7e9f6236c425097d9e5f18a6ac40655
+sha1 gdb-9.1.tar.xz a50e13e1eecea468ea28c4a23d8c5a84f4db25be
+sha256 gdb-9.1.tar.xz 699e0ec832fdd2f21c8266171ea5bf44024bd05164fdf064e4d10cc4cf0d1737
+sha512 gdb-9.1.tar.xz 84cdd408d80a3fc5779de459c5b26154d31b329ebde7e3aa78799fb1eb245d8b64b8c8ee7242382a1dbd95b4e6f9d84fef41d12a0646aa75d3dee4709ea1f6e7
+md5 gdb-9.1.tar.gz b6f0807334c273c78fd17df0f9b1c13a
+sha1 gdb-9.1.tar.gz c50a84d303afc9bea77cd5f129e83b4a4147a701
+sha256 gdb-9.1.tar.gz fcda54d4f35bc53fb24b50009a71ca98410d71ff2620942e3c829a7f5d614252
+sha512 gdb-9.1.tar.gz a51b1023e595b86db3d75edcd845739304b441eff4754a400241c6b45f2c38913a489776e67c5fa20e8d90a9e72e94f2f6b8495363d93c2350ddbade4839bcc3

packages/glibc/2.31/0000-typedef-caddr.patch

@@ -0,0 +1,17 @@
+---
+ posix/sys/types.h |    3 +++
+ 1 file changed, 3 insertions(+)
+
+--- a/posix/sys/types.h
++++ b/posix/sys/types.h
+@@ -112,7 +112,10 @@
+ #ifdef	__USE_MISC
+ # ifndef __daddr_t_defined
+ typedef __daddr_t daddr_t;
++#  if ! defined(caddr_t) && ! defined(__caddr_t_defined)
+ typedef __caddr_t caddr_t;
++#   define __caddr_t_defined
++#  endif
+ #  define __daddr_t_defined
+ # endif
+ #endif

packages/glibc/2.31/chksum

@@ -0,0 +1,12 @@
+md5 glibc-2.31.tar.xz 78a720f17412f3c3282be5a6f3363ec6
+sha1 glibc-2.31.tar.xz 55619672e5e13996e264d408949eb4aaa26e7ec8
+sha256 glibc-2.31.tar.xz 9246fe44f68feeec8c666bb87973d590ce0137cca145df014c72ec95be9ffd17
+sha512 glibc-2.31.tar.xz 735e4c0ef10418b6ea945ad3906585e5bbd8b282d76f2131309dce4cec6b15066a5e4a3731773ce428a819b542579c9957867bb0abf05ed2030983fca4412306
+md5 glibc-2.31.tar.bz2 10240bf74cf5320096778999e8d79774
+sha1 glibc-2.31.tar.bz2 487bf14fa22ab2317427f938f5a070cdc233077f
+sha256 glibc-2.31.tar.bz2 d55e6f90fca44c74ac992d85eef1ec3c8407d6d622f851fede6128b4b217ac71
+sha512 glibc-2.31.tar.bz2 7d5e1c04bb2eab39245ddc1f6635c441438ef6fd43d8b7cdb5557afc278c7fadacce57b983d312c5c1f2d98f00464039e1448358bb3d21073eb651eaa74d4990
+md5 glibc-2.31.tar.gz 05930b2e4381d0c4d7a79f25d266ef4f
+sha1 glibc-2.31.tar.gz 137aa0902c16fd7820de7b9b2fc9417d768c030c
+sha256 glibc-2.31.tar.gz cb2d64fb808affff30d8a99a85de9d2aa67dc2cbac4ae99af4500d6cfea2bda7
+sha512 glibc-2.31.tar.gz 17cdd447459e20760e080be37f8624b3ba69b3c3f3d1f178ca7e2e400b34cc210553747210dd54ae7b527c7a35de11a5bc1564bd4bb6f09b810a4f981e7750fe

packages/glibc/2.31/version.desc

@@ -0,0 +1 @@
+# Released 1 August 2019

packages/gmp/6.2.0/chksum

@@ -0,0 +1,12 @@
+md5 gmp-6.2.0.tar.xz a325e3f09e6d91e62101e59f9bda3ec1
+sha1 gmp-6.2.0.tar.xz 052a5411dc74054240eec58132d2cf41211d0ff6
+sha256 gmp-6.2.0.tar.xz 258e6cd51b3fbdfc185c716d55f82c08aff57df0c6fbd143cf6ed561267a1526
+sha512 gmp-6.2.0.tar.xz a066f0456f0314a1359f553c49fc2587e484ff8ac390ff88537266a146ea373f97a1c0ba24608bf6756f4eab11c9056f103c8deb99e5b57741b4f7f0ec44b90c
+md5 gmp-6.2.0.tar.lz e3e08ac185842a882204ba3c37985127
+sha1 gmp-6.2.0.tar.lz 93450c3197ab93173bf8f21c4e48c12814f4e8a3
+sha256 gmp-6.2.0.tar.lz 3f33f127bcb6b2c3601676cd3281df45824b148cbf688b73c0fc8248793667d9
+sha512 gmp-6.2.0.tar.lz 9975e8766e62a1d48c0b6d7bbdd2fccb5b22243819102ca6c8d91f0edd2d3a1cef21c526d647c2159bb29dd2a7dcbd0d621391b2e4b48662cf63a8e6749561cd
+md5 gmp-6.2.0.tar.bz2 c24161e0dd44cae78cd5f67193492a21
+sha1 gmp-6.2.0.tar.bz2 5e9341d3807bc7505376f9ed9f5c1c6c57050aa6
+sha256 gmp-6.2.0.tar.bz2 f51c99cb114deb21a60075ffb494c1a210eb9d7cb729ed042ddb7de9534451ea
+sha512 gmp-6.2.0.tar.bz2 ff22ed47fff176ed56301ecab0213316150a3abb370fed031635804f829c878296d7c65597b1f687f394479eef04fae6eba771162f7d363dc4c94c7334fc1fc0

packages/linux/3.16.80/chksum

@@ -1,8 +0,0 @@
-md5 linux-3.16.80.tar.xz 0a19581323767642c3a3cea3c39f605d
-sha1 linux-3.16.80.tar.xz f7f589a4baeaf2d8ee87ee170518856d0e3ec831
-sha256 linux-3.16.80.tar.xz 8dfd2a0f72855ef426057745de68e1c10f189785da4d679ccd1e63e2c67d8ebf
-sha512 linux-3.16.80.tar.xz 53a632372993946009fed7bcab58c39d0e7d89b5377126114d4f810cd3093dbad3dcf03822787128cec6147ee492a8c1253372f6343f7a31dd581aa00ec37d1c
-md5 linux-3.16.80.tar.gz b101dff0faa235fe3726124a8a843695
-sha1 linux-3.16.80.tar.gz c3d2932300ba149a83afc79d78f72183e19fda3d
-sha256 linux-3.16.80.tar.gz 141e205f04b13d749f8e8de5bd6bfa7dc39e30f854408d6c003e0ccc1df166dc
-sha512 linux-3.16.80.tar.gz 47e0c6992a73926a8730180736afede8bf46c5449545d1fb913215613ae80a97e5b44d80e92000318cbdc6855ba61a9f540c4e228da0d76abb59f767c8e8fc6b

packages/linux/3.16.82/chksum

@@ -0,0 +1,8 @@
+md5 linux-3.16.82.tar.xz 57293a3d19b9c169955621696524ffb6
+sha1 linux-3.16.82.tar.xz 6506661cbeb99e585e07e3c0a24d228b197f8a80
+sha256 linux-3.16.82.tar.xz 7211900eb429e95ee9a49b58976dc091fc7329909f3bd556e5185d9856890a77
+sha512 linux-3.16.82.tar.xz 1027feb141d8785ccfd1110a742c9b57587d7d1e68ef0bc7a42a5aa90d94694cd6c282e87a1a5e302ea9fdcd41ebf58332d50890f30c55037079cf09137e27b7
+md5 linux-3.16.82.tar.gz 5a82450480241a4291c61b1399db2f37
+sha1 linux-3.16.82.tar.gz 75dc19c093ec5ecda37367f2b9070dc4d5934cf1
+sha256 linux-3.16.82.tar.gz ce5fe5e4769f6c1af1a5594786cf55b18d74b9a6125d45b3ef84ee6ce25504f7
+sha512 linux-3.16.82.tar.gz 48cfef6926901264f522305987059fa62985732ba9c91cb3972ebee625857540830b10b8a9a31fc2b70a21140e175121d19899fcb86a5182356884120827fc0f

packages/linux/4.14.160/chksum

@@ -1,8 +0,0 @@
-md5 linux-4.14.160.tar.xz 286501d9badbb724fddbc6e20e46aa1e
-sha1 linux-4.14.160.tar.xz 19746512b1d8a123f5590b034b27917147762a2c
-sha256 linux-4.14.160.tar.xz c60326bad1bcdede514ca8a0bb96843fa7578ef00829cced6218b888b2efa92c
-sha512 linux-4.14.160.tar.xz 41f459a20e2759d2d24e9010081b1c924a6dd27c8f838a4ada6192fa3aa1adc2898276f272a519e6ae639f7002b31e2d6811afc7d6f65e1dafd8bfe246f2770d
-md5 linux-4.14.160.tar.gz a0270ae407ea2c67d6c50ca942cadb28
-sha1 linux-4.14.160.tar.gz 9be3fe439e90f7d6789c5418d8699e18e50f7124
-sha256 linux-4.14.160.tar.gz 6da464dd58594c17193ea0adc309171d1a7c64fadd52da672aaa048bc02fb240
-sha512 linux-4.14.160.tar.gz 85e9275695676935b7d63ba8404b6791808785b592af9328eab56f16c4e864c07378819e29ca04c93fa479aff20a963bddbcdf6834579cbead691490a8ff6f7e

packages/linux/4.14.171/chksum

@@ -0,0 +1,8 @@
+md5 linux-4.14.171.tar.xz b9b2c64eb3ae7fa6023d2b8c981b5ac4
+sha1 linux-4.14.171.tar.xz 6ef4629c9ab5be9078f8206f3fd1539b7bbadfe2
+sha256 linux-4.14.171.tar.xz 4fe02489e4b4a187eccf0ef87df6100534c9d485e76d876b1fa247c7635332a0
+sha512 linux-4.14.171.tar.xz 681a39674609317c7571dbedeadffee6e1b7ac11be25cc887012b507925306eae04aa93b4fb5b6e3207cfffce0972c0b772068a2ab72393d771446dc981dccac
+md5 linux-4.14.171.tar.gz b1508924bc661ccf3367e76e131ba8f5
+sha1 linux-4.14.171.tar.gz 3ec3922b43e23cdc31a39ed3a5602baaec4ecd6c
+sha256 linux-4.14.171.tar.gz 8c46e833b4ff2bd2d4f35472e55f82c677d84d2373dbbfa6400825e7ced60663
+sha512 linux-4.14.171.tar.gz cb55c4e76543189ee0a9c98eeeca4b46cf3f6ec168dcb5f4d34298b77049fa60efa5517e30a2841c9b75f87461ecba69cac69ec2371a3d47b8e8fb89a9d79369

packages/linux/4.19.105/chksum

@@ -0,0 +1,8 @@
+md5 linux-4.19.105.tar.xz 960073de540e54312c81750f74231983
+sha1 linux-4.19.105.tar.xz 5b60fff574de613876165cbb10da41efe3381308
+sha256 linux-4.19.105.tar.xz f82c778ab404feb3dce6c08bff089fe2e1d86b62fc40cf2950112ea7aa22bf12
+sha512 linux-4.19.105.tar.xz 32dc4eb8b535af3a3998a8d4fca4d1b47d1a09fdb324d18e70b4098d7431d836d3c6449cbf07d4b5188ba07bfafa0c2f91ec875b369676f208a25f45d40f64c1
+md5 linux-4.19.105.tar.gz 17ed120e3d0c61fb7cc828b7d9203cd8
+sha1 linux-4.19.105.tar.gz aa445ccbe1c12626cb8a1160572c0dabd596048a
+sha256 linux-4.19.105.tar.gz 2253ee8fd3c2b587b6af0410875160f48472be21aa0f76c9e4caa329cbe4e09d
+sha512 linux-4.19.105.tar.gz 24f05ffbacac2d43f4cc5068e98cd8621218d327c81872dd7c3f3c91503b7534b2a6a33be0b35fd9fa054511d3d96f8962b8926199b993aa29fc28b776b92574

packages/linux/4.19.91/chksum

@@ -1,8 +0,0 @@
-md5 linux-4.19.91.tar.xz 72d77599f5b7165846792adc8ddef670
-sha1 linux-4.19.91.tar.xz 387b8c47361c3b74fb1170afd9405557fc7b5c3d
-sha256 linux-4.19.91.tar.xz f403c3dee12ded0af1889c78871abf7a531a978ba423f1ca772de702a92c3447
-sha512 linux-4.19.91.tar.xz 887105d90c7fc475ee93670240ddeaff931d5d8417389ba9979f384da846bdea704a27a9afc195d7007b02b1bb8eff466285be947d51639b4ff1d0c2053f5f7a
-md5 linux-4.19.91.tar.gz 50711e32accf7a31ea04e092f49e3acd
-sha1 linux-4.19.91.tar.gz 55bf3912f044a134e42fa3c33f2e3d7d10a27523
-sha256 linux-4.19.91.tar.gz f5a9e6774a4ba2d59537d0dbedda0ebccf81d1c072b3e6f1707b3c97fb0edb96
-sha512 linux-4.19.91.tar.gz b583d2195a8f080f52e249df4ef39761ed0db92af3eedf11a891697ea69a0b044285e11eec9f116d3c1045a0818ec5598c6d205f59440e0cfda7f6c14266768b

packages/linux/4.4.207/chksum

@@ -1,8 +0,0 @@
-md5 linux-4.4.207.tar.xz 6ad0451eeb065e08f49161506a4f29c7
-sha1 linux-4.4.207.tar.xz 20bf62de50f3b4442689e1abbb4c0f952a154a6f
-sha256 linux-4.4.207.tar.xz 66c906077589124997ac3b92cda4de44cb206876b9e1a7d1f4840e6aa5a28e08
-sha512 linux-4.4.207.tar.xz 979c4ba89f2d528a25a033e93101fec37b9860062d57d1f3e2103b59acf02ae71a254af2acd4826080e80032e0a5e9c39ede829eb433768c8e4fa1238a8ade1e
-md5 linux-4.4.207.tar.gz 3126845120f4266020632d8291282c96
-sha1 linux-4.4.207.tar.gz 50f2fbd82d6092f9839c45883ecbf071969cac5a
-sha256 linux-4.4.207.tar.gz 7c903730e0bbce6c7780d9f2b546c4f95c64b8c98e84d6db1cc814c0f90e0283
-sha512 linux-4.4.207.tar.gz e00d90739c52cb44c4097e6424458d0aa6f1cfa44f9d287b1dbe8eb1bf4bdfdae4eff090d0c39dee7af0d6abf374bdf80a11e9f6631f65394bece8e6c8f3999b

packages/linux/4.4.214/chksum

@@ -0,0 +1,8 @@
+md5 linux-4.4.214.tar.xz 2554c06f3c522bea41251b18884d62e8
+sha1 linux-4.4.214.tar.xz a859fe318e245aa2f723c26835f4e655fd16f847
+sha256 linux-4.4.214.tar.xz b6aa65ee2c0767864175e3a9cf7b0b3751263b04a7c8a6e760e9b982282fa76c
+sha512 linux-4.4.214.tar.xz 959112fe5f8ab8e6fe8c0e84ca47e5134967dc3f2cd64fbc940cdfcf4ccbfed3acf7aef60a9dd8eac1407ac3e87020630ad71efceced1d0bac1c1b75a62c49f2
+md5 linux-4.4.214.tar.gz 32bd03b0527dcfbaac2794a7a2461206
+sha1 linux-4.4.214.tar.gz d82f3b9777e0322c0413b1fe2028539eca9501e0
+sha256 linux-4.4.214.tar.gz dde034590830f8ba0d78e837379be801c387200beebc646f5f5008c5315adc0e
+sha512 linux-4.4.214.tar.gz de89a3b0fabf2e702625d8a786cd9cd086050f9057358b704078e9cb3876d5ce66cb86c94df55fc3344c3efa0a4b74498c9c5cff7c7be61729010ac693e5fd47

packages/linux/4.9.207/chksum

@@ -1,8 +0,0 @@
-md5 linux-4.9.207.tar.xz b6df01e075297a783b69159b9eceb62d
-sha1 linux-4.9.207.tar.xz b1ff7e105a0bcc65a980831dfb5a0046934174fe
-sha256 linux-4.9.207.tar.xz ca86637e7b5bec65eeb7da695824e0e8aca5ba52eb742885f0b7241977400124
-sha512 linux-4.9.207.tar.xz a3909467f7e2f98f671ed59bbecd5229c3255f41387be449bbb4e1a7cbf0b801ebede2b9b66fcf9e88e947513ecc92dc2e0944f1190c08fdcf6a0c53f971469b
-md5 linux-4.9.207.tar.gz 6591052aacd2799345784e63f6c83c8e
-sha1 linux-4.9.207.tar.gz 86cdc5ba4e4bebc4dac24fb9f4a9816218f2e926
-sha256 linux-4.9.207.tar.gz e59fac460e0efc26ae5faa40842bdd40bf963ceb65e121c1a91089d160cbf45a
-sha512 linux-4.9.207.tar.gz 2a75e1e458a7622b41e7cc2500cc4cf16bb4fe8a19aa68e50263752c96c3d762acd097eaf42fe527f8f30f3186e6b0c3f8326b62580275d8a59518eb00c6e6fa

packages/linux/4.9.214/chksum

@@ -0,0 +1,8 @@
+md5 linux-4.9.214.tar.xz d0918e3ea80d03457a536b9b382df7f1
+sha1 linux-4.9.214.tar.xz 40fbbe2606f486223fd5cad15b9e7fd6d9845bac
+sha256 linux-4.9.214.tar.xz b47f093dac7034c7c4722e80042c05e4ef53c14a4f28aa992117a127d2b1e483
+sha512 linux-4.9.214.tar.xz bc11a45a0235e29647087c848ea660e0367f0ca6b6f360621a65f59d411aedfee14372116a7f3f105a9d12d057cea2bbda412d1df2afc17d28be0399057a2850
+md5 linux-4.9.214.tar.gz 5aa2edd29658d98b63a6d94797d24db2
+sha1 linux-4.9.214.tar.gz 21d7791562a919ba3a2b6d28b9d5fd267239b1b5
+sha256 linux-4.9.214.tar.gz b76e7d02ee1251cfc7b1577738f038f2d99813b02c8eca27f0671cdc6837f7be
+sha512 linux-4.9.214.tar.gz c54da65d1b6ccad76e9d4d42a18687ac29eee0be1febd5f1885c42666300b924f6751c9d98f8415c9c6e656bb836a436aa36562efe3c9ec719594484228521b8

packages/linux/5.4.21/chksum

@@ -0,0 +1,8 @@
+md5 linux-5.4.21.tar.xz 0c458def17ddd8e26795c343e15a3023
+sha1 linux-5.4.21.tar.xz 5bf514cbdb4a53279d65e4d5520be66800fe3323
+sha256 linux-5.4.21.tar.xz 6d23724e92c6a012a5cbb0deafdff81bdc03f6f9295e36259164cd431e465bfa
+sha512 linux-5.4.21.tar.xz 816e0acc3be5ab5614f573fea6749fb3e2bd260753f97129882455875b60faf2cf1bee949e5920e11a05052e8ea845a94a922ea6ab4e9097594b2f468bd8d75a
+md5 linux-5.4.21.tar.gz e404d1446058aa271f717f07d3fb9d90
+sha1 linux-5.4.21.tar.gz 340b5ab0f03673351c84d3f0813e815f8d50f6d9
+sha256 linux-5.4.21.tar.gz 04c762ba97963545cb459bb90bdc0fa42c65ef147d9182575c2c90bc671e31bf
+sha512 linux-5.4.21.tar.gz 681d3b68543778326d836194963b7dea55b525175f2ee74825e6e050c9bb7fb345cdb894f2ac226d7330d8cdb375d7f8d2184b3bccd5e09591f3c30372383d51

packages/linux/5.4.6/chksum

@@ -1,8 +0,0 @@
-md5 linux-5.4.6.tar.xz d77c45902ea8cdbbffed46ae92ae5ec8
-sha1 linux-5.4.6.tar.xz 456bd2281815f427ee9259ab9824d9f71341920d
-sha256 linux-5.4.6.tar.xz fda561bcdea397ddd59656319c53871002938b19b554f30efed90affa30989c8
-sha512 linux-5.4.6.tar.xz 9e1153e80303d6d5016856a25f3757259a3a428bad11208192315088d1f1a09957f5b8e966ab8cb5842ce1a740760f87474066294f8b410e9c44c810838bcdac
-md5 linux-5.4.6.tar.gz a6a080e7aded6a173a5a6a815ddb635d
-sha1 linux-5.4.6.tar.gz 95434f1f42b42cfb6d1201edbdb8670186ac27ff
-sha256 linux-5.4.6.tar.gz 90fb0c75e956f3f5820cea3bd0d5cb3349bb217bc495a8267fe27d966a32b1ee
-sha512 linux-5.4.6.tar.gz a2699fe1014463d40ef3c3e8eb19e4786eb7882873d5b6e3e0d93498f9d82224215cee143b7c96e09e39c50c9786c24654f270b0a52ec91984b15d243a414376

packages/linux/5.5.5/chksum

@@ -0,0 +1,8 @@
+md5 linux-5.5.5.tar.xz 3901498f9d38e355bc2670eb3f05a160
+sha1 linux-5.5.5.tar.xz 3dd7fe170c84a342ad1db8ae6742276e2eb88303
+sha256 linux-5.5.5.tar.xz 7ac07bc03f2d159f924d25a79df07d1a115a13f44f67455511d3c84c15ac5087
+sha512 linux-5.5.5.tar.xz 2d0ed596509546169d0e0d46c23e10920e6b565178e044fe57b68b7ff0ec5c613bb090105affc74e5bcacda36f8c8a49c269017e90dd7145f58e9359707f35d1
+md5 linux-5.5.5.tar.gz f464a9459ab811ede1e4eded51e5b53d
+sha1 linux-5.5.5.tar.gz 38903c3b13e79f5ef07330f1e87b0e67434fdfa7
+sha256 linux-5.5.5.tar.gz 2c5de9dc0ae49d6d5550e4007ffc6c3aec193666c1299fce2b05659f5a109eac
+sha512 linux-5.5.5.tar.gz 023c5ddd1e23961eb430a31470b75c0cb64ab8f0c8e845d76f7e4cfee40d0925e8122c243d3f2a5d7696b74a07f6dba36d9ffea57c9471d066adb11fb5a046e4

packages/make/3.81/version.desc

@@ -1 +1,2 @@
 obsolete='yes'
+archive_formats='.tar.bz2 .tar.gz'

packages/make/4.0/version.desc

@@ -1 +1,2 @@
 obsolete='yes'
+archive_formats='.tar.bz2 .tar.gz'

packages/make/4.1/version.desc

@@ -1 +1,2 @@
 obsolete='yes'
+archive_formats='.tar.bz2 .tar.gz'

packages/make/4.2.1/version.desc

@@ -0,0 +1,2 @@
+
+archive_formats='.tar.bz2 .tar.gz'

packages/make/4.3/chksum

@@ -0,0 +1,8 @@
+md5 make-4.3.tar.lz d5c40e7bd1e97a7404f5d3be982f479a
+sha1 make-4.3.tar.lz c72bc87715fcdf8c1e2efab84c254aac69615f7b
+sha256 make-4.3.tar.lz de1a441c4edf952521db30bfca80baae86a0ff1acd0a00402999344f04c45e82
+sha512 make-4.3.tar.lz ddf0fdcb9ee1b182ef294c5da70c1275288c99bef60e63a25c0abed2ddd44aba1770be4aab1db8cac81e5f624576f2127c5d825a1824e1c7a49df4f16445526b
+md5 make-4.3.tar.gz fc7a67ea86ace13195b0bce683fd4469
+sha1 make-4.3.tar.gz 3c40e5b49b893dbb14f1e2e1f8fe89b7298cc51d
+sha256 make-4.3.tar.gz e05fdde47c5f7ca45cb697e973894ff4f5d79e13b750ed57d7b66d8defc78e19
+sha512 make-4.3.tar.gz 9a1185cc468368f4ec06478b1cfa343bf90b5cd7c92c0536567db0315b0ee909af53ecce3d44cfd93dd137dbca1ed13af5713e8663590c4fdd21ea635d78496b

packages/make/package.desc

@@ -2,6 +2,6 @@ repository='git https://git.savannah.gnu.org/git/make.git'
 bootstrap='autoreconf -i'
 mirrors='$(CT_Mirrors GNU make)'
 relevantpattern='*.*|.'
-archive_formats='.tar.bz2 .tar.gz'
+archive_formats='.tar.lz .tar.gz'
 signature_format='packed/.sig'
 milestones='4.0'

packages/ncurses/6.2/chksum

@@ -0,0 +1,4 @@
+md5 ncurses-6.2.tar.gz e812da327b1c2214ac1aed440ea3ae8d
+sha1 ncurses-6.2.tar.gz 56e410fb77f2b5501a0b2f6a995376f3cefe1097
+sha256 ncurses-6.2.tar.gz 30306e0c76e0f9f1f0de987cf1c82a5c21e1ce6568b9227f7da5b71cbea86c9d
+sha512 ncurses-6.2.tar.gz 4c1333dcc30e858e8a9525d4b9aefb60000cfc727bc4a1062bace06ffc4639ad9f6e54f6bdda0e3a0e5ea14de995f96b52b3327d9ec633608792c99a1e8d840d

packages/newlib/3.2.0/0000-fix-unaligned-access-memcpy-m68k.patch

@@ -0,0 +1,25 @@
+The m68k mcpu processor does not like unaligned access
+
+Disable at least mcpu32, m68010 and m68020. These processors certainly
+do not like unaligned accesses.
+
+Signed-off-by: Remy Bohmer <linux@bohmer.net>
+[yann.morin.1998@anciens.enib.fr: update for 1.19.0 from 1.18.0]
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+[austinpmorton@gmail.com: update for 1.20.0 from 1.19.0]
+Signed-off-by: Austin Morton <austinpmorton@gmail.com>
+---
+ newlib/libc/machine/m68k/memcpy.S |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/newlib/libc/machine/m68k/memcpy.S
++++ b/newlib/libc/machine/m68k/memcpy.S
+@@ -15,7 +15,7 @@
+ 
+ #include "m68kasm.h"
+ 
+-#if defined (__mcoldfire__) || defined (__mc68010__) || defined (__mc68020__) || defined (__mc68030__) || defined (__mc68040__) || defined (__mc68060__)
++#if defined (__mcoldfire__) || defined (__mc68030__) || defined (__mc68040__) || defined (__mc68060__)
+ # define MISALIGNED_OK 1
+ #else
+ # define MISALIGNED_OK 0

packages/newlib/3.2.0/0001-fix-mt-cflags.patch

@@ -0,0 +1,13 @@
+---
+ config/mt-d30v |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/config/mt-d30v
++++ b/config/mt-d30v
+@@ -1,4 +1,4 @@
+ # Build libraries optimizing for space, not speed.
+ # Turn off warnings about symbols named the same as registers
+- CFLAGS_FOR_TARGET = -g -Os -Wa,-C
+- CXXFLAGS_FOR_TARGET = -g -Os -Wa,-C
++ CFLAGS_FOR_TARGET += -g -Os -Wa,-C
++ CXXFLAGS_FOR_TARGET += -g -Os -Wa,-C

packages/newlib/3.2.0/chksum

@@ -0,0 +1,4 @@
+md5 newlib-3.2.0.tar.gz afb3a01c8c82b6717ea55659a4de30ec
+sha1 newlib-3.2.0.tar.gz 659c491ddb1713a37ba31ba0273efb56a53b89a9
+sha256 newlib-3.2.0.tar.gz f7b2322964a1e3b37bec0768da20f50dfb62247d729110974dd95756a53bb6d4
+sha512 newlib-3.2.0.tar.gz 8265d8f08333301a26632b4468b6fd30a33d1e85e9e0b40ad60916089839ea722dcccd87142c7fbcaaf0aacbc9d2b97f5f13a06fe6a512f5951bfc52aa07498d

packages/newlib/3.3.0/0000-fix-unaligned-access-memcpy-m68k.patch

@@ -0,0 +1,25 @@
+The m68k mcpu processor does not like unaligned access
+
+Disable at least mcpu32, m68010 and m68020. These processors certainly
+do not like unaligned accesses.
+
+Signed-off-by: Remy Bohmer <linux@bohmer.net>
+[yann.morin.1998@anciens.enib.fr: update for 1.19.0 from 1.18.0]
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+[austinpmorton@gmail.com: update for 1.20.0 from 1.19.0]
+Signed-off-by: Austin Morton <austinpmorton@gmail.com>
+---
+ newlib/libc/machine/m68k/memcpy.S |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/newlib/libc/machine/m68k/memcpy.S
++++ b/newlib/libc/machine/m68k/memcpy.S
+@@ -15,7 +15,7 @@
+ 
+ #include "m68kasm.h"
+ 
+-#if defined (__mcoldfire__) || defined (__mc68010__) || defined (__mc68020__) || defined (__mc68030__) || defined (__mc68040__) || defined (__mc68060__)
++#if defined (__mcoldfire__) || defined (__mc68030__) || defined (__mc68040__) || defined (__mc68060__)
+ # define MISALIGNED_OK 1
+ #else
+ # define MISALIGNED_OK 0

packages/newlib/3.3.0/0001-fix-mt-cflags.patch

@@ -0,0 +1,13 @@
+---
+ config/mt-d30v |    4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/config/mt-d30v
++++ b/config/mt-d30v
+@@ -1,4 +1,4 @@
+ # Build libraries optimizing for space, not speed.
+ # Turn off warnings about symbols named the same as registers
+- CFLAGS_FOR_TARGET = -g -Os -Wa,-C
+- CXXFLAGS_FOR_TARGET = -g -Os -Wa,-C
++ CFLAGS_FOR_TARGET += -g -Os -Wa,-C
++ CXXFLAGS_FOR_TARGET += -g -Os -Wa,-C

packages/newlib/3.3.0/chksum

@@ -0,0 +1,4 @@
+md5 newlib-3.3.0.tar.gz af1c64d25eb3f71dec5ad7ec79877d7f
+sha1 newlib-3.3.0.tar.gz ed1c5b65e8aa5b437f40875d8ae629a7d9b7e824
+sha256 newlib-3.3.0.tar.gz 58dd9e3eaedf519360d92d84205c3deef0b3fc286685d1c562e245914ef72c66
+sha512 newlib-3.3.0.tar.gz 2f0c6666487520e1a0af0b6935431f85d2359e27ded0d01d02567d0d1c6479f2f0e6bbc60405e88e46b92c2a18780a01a60fc9281f7e311cfd40b8d5881d629c

packages/strace/5.5/chksum

@@ -0,0 +1,4 @@
+md5 strace-5.5.tar.xz dbce2e84632b39a4ed86b9fc60447af9
+sha1 strace-5.5.tar.xz ebacd8fb078aabc2e4a856657bac299589641d28
+sha256 strace-5.5.tar.xz 9f58958c8e59ea62293d907d10572e352b582bd7948ed21aa28ebb47e5bf30ff
+sha512 strace-5.5.tar.xz 317fe6341000b452cf038433c2a9a7bcdc8ce736e97b242673ce066dd9dbd3b2c3435a014b529429fdf2ac8af5c3a72d62971b293d007b7d3efcbb684c216231

packages/uClibc-ng/1.0.33/chksum

@@ -0,0 +1,16 @@
+md5 uClibc-ng-1.0.33.tar.xz 4e4a5e5acec0c7541eddcc80ebcf6765
+sha1 uClibc-ng-1.0.33.tar.xz 1a3153bc482695672287c80a428fda994cd3c8d2
+sha256 uClibc-ng-1.0.33.tar.xz 4dfa9d438863f741a5a2f384d467fa9da397fd82acfcb9bb26f5d5634d70153a
+sha512 uClibc-ng-1.0.33.tar.xz 61b5514ab430486f08f3e20202db54980c3c65255faa0fc0eff06a4b3449aaf0ebee12022af517fd9d554903a8d30c85c7856dd28c19201e4fca61dda0f3b96a
+md5 uClibc-ng-1.0.33.tar.lz 3a22e02ced95c89829d2ba97c34564b4
+sha1 uClibc-ng-1.0.33.tar.lz 26656132b07e593c9aa20ba3308c1982c641f102
+sha256 uClibc-ng-1.0.33.tar.lz fab08e1401ebd55714f3b38bac634bbceea65ccf13d87a31f4d517c8690e0ffe
+sha512 uClibc-ng-1.0.33.tar.lz 1c79660a1ecc232893b927af2882b48ce81787e0f9a9c1e3dd5f1401be2d92ca054b571b16d8e14f2d782b37b683f5e8113d95b49d19bd0943ad8ae70c30a2b6
+md5 uClibc-ng-1.0.33.tar.bz2 dbdd55667073b4348aa41886948b7f54
+sha1 uClibc-ng-1.0.33.tar.bz2 120790eec0bde406a4d528f0163543b82ccd0538
+sha256 uClibc-ng-1.0.33.tar.bz2 13ffacc47866deb00703ea480874340e98735152ab3499bae43b43badef12a33
+sha512 uClibc-ng-1.0.33.tar.bz2 379f2ebc0f5e2abb60bbfc17a4ce65da09555d6177b634688f6cd4d3f4bdd44fade8120429c81364eb94feda68baed9e7846f4162367bffa6eedf44744ebb33c
+md5 uClibc-ng-1.0.33.tar.gz 77a451bee3a7d8becb980e18ea4e79e2
+sha1 uClibc-ng-1.0.33.tar.gz 37cddab2fbe1a28e4166553c2679d887aa78db52
+sha256 uClibc-ng-1.0.33.tar.gz a82ec016d105d808a9fad18016ba630bb62300fb126cddecf572dccfa33d74f8
+sha512 uClibc-ng-1.0.33.tar.gz 5b3db242094fbfeab79ae1f64aadfbb6849dcfd6b1eea93cb9c1d32be544e9bc39846383c46622669259f0750f9da73177c4c7bc16ddea02c5202ef9f1fb5a10

scripts/build/arch/sparc.sh

@@ -14,6 +14,10 @@ CT_DoArchTupleValues() {
     if [ "${CT_KERNEL}" = "linux" -a "${CT_ARCH_64}" = "y" -a -z "${CT_ARCH_CPU}" ]; then
         CT_DoLog WARN "Setting CPU to UltraSPARC-I for sparc64-linux. Set CT_ARCH_CPU if a different CPU is desired."
         CT_ARCH_WITH_CPU="--with-cpu=ultrasparc"
+        if [ -n "${CT_ARCH_SUPPORTS_WITH_32_64}" -a -n "${CT_MULTILIB}" ]; then
+            CT_ARCH_WITH_CPU_32="--with-cpu-32=ultrasparc"
+            CT_ARCH_WITH_CPU_64="--with-cpu-64=ultrasparc"
+        fi
     fi
 }
 

scripts/build/cc/gcc.sh

@@ -351,7 +351,7 @@ do_gcc_core_backend() {
             ;;
     esac
 
-    for tmp in ARCH ABI CPU TUNE FPU FLOAT ENDIAN; do
+    for tmp in ARCH ABI CPU CPU_32 CPU_64 TUNE FPU FLOAT ENDIAN; do
         eval tmp="\${CT_ARCH_WITH_${tmp}}"
         if [ -n "${tmp}" ]; then
             extra_config+=("${tmp}")
@@ -905,7 +905,7 @@ do_gcc_backend() {
     # Enable selected languages
     extra_config+=("--enable-languages=${lang_list}")
 
-    for tmp in ARCH ABI CPU TUNE FPU FLOAT; do
+    for tmp in ARCH ARCH_32 ARCH_64 ABI CPU CPU_32 CPU_64 TUNE TUNE_32 TUNE_64 FPU FLOAT; do
         eval tmp="\${CT_ARCH_WITH_${tmp}}"
         if [ -n "${tmp}" ]; then
             extra_config+=("${tmp}")

scripts/functions

@@ -1040,7 +1040,8 @@ CT_GetFile()
 # TBD these should not be needed if config.sub/guess is a package
 # Two wrappers to call config.(guess|sub) either from CT_TOP_DIR or CT_LIB_DIR.
 # Those from CT_TOP_DIR, if they exist, will be be more recent than those from CT_LIB_DIR.
-CT_DoConfigGuess() {
+CT_DoConfigGuess()
+{
     if [ -r "${CT_TOP_DIR}/scripts/config.guess" ]; then
         "${CT_CONFIG_SHELL}" "${CT_TOP_DIR}/scripts/config.guess"
     else
@@ -1048,7 +1049,8 @@ CT_DoConfigGuess() {
     fi
 }
 
-CT_DoConfigSub() {
+CT_DoConfigSub()
+{
     if [ -r "${CT_TOP_DIR}/scripts/config.sub" ]; then
         "${CT_CONFIG_SHELL}" "${CT_TOP_DIR}/scripts/config.sub" "$@"
     else
@@ -1060,7 +1062,8 @@ CT_DoConfigSub() {
 # environment for the next step(s). When this is needed, it can do so by
 # invoking this function.
 # Usage: CT_EnvModify [export] VAR VALUE
-CT_EnvModify() {
+CT_EnvModify()
+{
     local e
     if [ "$1" = "export" ]; then
         shift
@@ -1075,7 +1078,10 @@ CT_EnvModify() {
 # In fact this function takes the environment variables to build the target
 # tuple. It is needed both by the normal build sequence, as well as the
 # sample saving sequence.
-CT_DoBuildTargetTuple() {
+CT_DoBuildTargetTuple()
+{
+    local tmp
+
     # Set the endianness suffix, and the default endianness gcc option
     target_endian_eb=
     target_endian_be=
@@ -1137,13 +1143,29 @@ CT_DoBuildTargetTuple() {
     esac
 
     # Set the default values for ARCH, ABI, CPU, TUNE, FPU and FLOAT
-    unset CT_ARCH_ARCH_CFLAG CT_ARCH_ABI_CFLAG CT_ARCH_CPU_CFLAG CT_ARCH_TUNE_CFLAG CT_ARCH_FPU_CFLAG CT_ARCH_FLOAT_CFLAG
-    unset CT_ARCH_WITH_ARCH CT_ARCH_WITH_ABI CT_ARCH_WITH_CPU CT_ARCH_WITH_TUNE CT_ARCH_WITH_FPU CT_ARCH_WITH_FLOAT CT_ARCH_WITH_ENDIAN
-    [ "${CT_ARCH_ARCH}"     ] && { CT_ARCH_ARCH_CFLAG="-march=${CT_ARCH_ARCH}";  CT_ARCH_WITH_ARCH="--with-arch=${CT_ARCH_ARCH}"; }
-    [ "${CT_ARCH_ABI}"      ] && { CT_ARCH_ABI_CFLAG="-mabi=${CT_ARCH_ABI}";     CT_ARCH_WITH_ABI="--with-abi=${CT_ARCH_ABI}";    }
-    [ "${CT_ARCH_CPU}"      ] && { CT_ARCH_CPU_CFLAG="-mcpu=${CT_ARCH_CPU}";     CT_ARCH_WITH_CPU="--with-cpu=${CT_ARCH_CPU}";    }
-    [ "${CT_ARCH_TUNE}"     ] && { CT_ARCH_TUNE_CFLAG="-mtune=${CT_ARCH_TUNE}";  CT_ARCH_WITH_TUNE="--with-tune=${CT_ARCH_TUNE}"; }
-    [ "${CT_ARCH_FPU}"      ] && { CT_ARCH_FPU_CFLAG="-mfpu=${CT_ARCH_FPU}";     CT_ARCH_WITH_FPU="--with-fpu=${CT_ARCH_FPU}";    }
+    for tmp in ARCH ABI CPU TUNE FPU FLOAT ENDIAN; do
+        eval "unset CT_ARCH_${tmp}_CFLAG CT_ARCH_WITH_${tmp} CT_ARCH_WITH_${tmp}_32 CT_ARCH_WITH_${tmp}_64"
+    done
+
+    [ -n "${CT_ARCH_ABI}" ] && { CT_ARCH_ABI_CFLAG="-mabi=${CT_ARCH_ABI}"; CT_ARCH_WITH_ABI="--with-abi=${CT_ARCH_ABI}"; }
+    [ -n "${CT_ARCH_FPU}" ] && { CT_ARCH_FPU_CFLAG="-mfpu=${CT_ARCH_FPU}"; CT_ARCH_WITH_FPU="--with-fpu=${CT_ARCH_FPU}"; }
+
+    # The options below have distinct variants for multilib-enabled toolchain.
+    # At this time, we just always have them equal to the "main" setting; it
+    # seems that most example configurations are built for a specific CPU.
+    # If there's demand for it, we can turn them into separate knobs in
+    # Kconfig later.
+    for tmp in ARCH CPU TUNE; do
+        eval "val=\${CT_ARCH_${tmp}}"
+        if [ -n "${val}" ]; then
+            eval "CT_ARCH_${tmp}_CFLAG=-m${tmp,,}=${val}"
+            eval "CT_ARCH_WITH_${tmp}=--with-${tmp,,}=${val}"
+            if [ -n "${CT_ARCH_SUPPORTS_WITH_32_64}" -a -n "${CT_MULTILIB}" ]; then
+                eval "CT_ARCH_WITH_${tmp}_32=--with-${tmp,,}-32=${val}"
+                eval "CT_ARCH_WITH_${tmp}_64=--with-${tmp,,}-64=${val}"
+            fi
+        fi
+    done
 
     case "${CT_ARCH_FLOAT}" in
         hard)