crosstool-ng/ct-ng.in

#!@MAKE@ -rf
# vim: set filetype=make noet :
# Makefile for crosstool-NG.
# Copyright 2006 Yann E. MORIN <yann.morin.1998@free.fr>

# Don't print directory as we descend into them
# Don't use built-in rules, we know what we're doing
MAKEFLAGS += --no-print-directory --no-builtin-rules

# Don't go parallel
.NOTPARALLEL:

# This is where ct-ng is:
export CT_NG:=$(abspath $(lastword $(MAKEFILE_LIST)))
# and this is where we're working in:
export CT_TOP_DIR:=$(shell pwd)

ifeq (@enable_local@,yes)
# automake does not allow to set pkgxxxdir, they are always derived from
# a respective xxxdir. So, for enable-local case, set them directly here.
export CT_LIB_DIR:=$(patsubst %/,%,$(dir $(CT_NG)))
export CT_LIBEXEC_DIR:=$(CT_LIB_DIR)/kconfig
export CT_DOC_DIR:=$(CT_LIB_DIR)/docs
export CT_LICENSE_DIR
else
# Paths and values set by ./configure
# Don't bother to change it other than with a new ./configure!
export CT_LIB_DIR:=@pkgdatadir@
export CT_LIBEXEC_DIR:=@pkglibexecdir@
export CT_DOC_DIR:=@docdir@
endif

# This is crosstool-NG version string
export CT_VERSION:=@PACKAGE_VERSION@

# Export with an empty value: this masks the version detection variable in
# user-visible configurators, and suppresses a warning from kconfig.
export CT_VCHECK=

# Current version of the configuration file. Defined here, because we also
# need to pass it to the upgrade script - which may receive an input that
# was not preprocessed by kconfig, and hence have no string for "up-to-date"
# version.
export CT_CONFIG_VERSION_CURRENT=4

# Download agents used by scripts.mk
CT_WGET     := @wget@
CT_CURL     := @curl@

# Paths found by ./configure
export install      = @INSTALL@
export bash         = @BASH_SHELL@
export awk          = @AWK@
export grep         = @GREP@
export make         = @MAKE@
export sed          = @SED@
export libtool      = @LIBTOOL@
export libtoolize   = @LIBTOOLIZE@
export objcopy      = @OBJCOPY@
export objdump      = @OBJDUMP@
export readelf      = @READELF@
export patch        = @PATCH@

# Some distributions (eg. Ubuntu) thought it wise to point /bin/sh to
# a truly POSIX-conforming shell, ash in this case. This is not so good
# as we, smart (haha!) developers (as smart we ourselves think we are),
# got used to bashisms, and are inclined to easiness... So force use of
# bash.
export SHELL=$(bash)

# Make the restart/stop steps available to scripts/crostool-NG.sh
export CT_STOP:=$(STOP)
export CT_RESTART:=$(RESTART)

SILENT=@
CT_ECHO=echo
ifeq ($(strip $(origin V)),command line)
  ifeq ($(strip $(V)),0)
    SILENT=@
    CT_ECHO=:
  else
    ifeq ($(strip $(V)),1)
      SILENT=
      CT_ECHO=:
    else
      ifeq ($(strip $(V)),2)
        SILENT=
        CT_ECHO=echo
      endif # V == 2
    endif # V== 1
  endif # V == 0
endif # origin V
export V SILENT CT_ECHO

all: help

.PHONY: $(PHONY)
PHONY += all
FORCE:

# Configuration rules. Currently, saveSample.sh uses some of the variables
# below - they should be passed explicitly.

# Top file of crosstool-NG configuration
export KCONFIG_TOP = $(CT_LIB_DIR)/config/config.in

CONF            := $(CT_LIBEXEC_DIR)/conf
CONF-menuconfig := $(CT_LIBEXEC_DIR)/mconf
CONF-nconfig    := $(CT_LIBEXEC_DIR)/nconf

# Used by conf/mconf/nconf to find the .in files
# TBD needed? We do supply the defconfig name explicitly below
export srctree=$(CT_LIB_DIR)

.PHONY: menuconfig nconfig oldconfig olddefconfig savedefconfig defconfig check-config extractconfig
.PHONY: upgradeconfig

check-config:
	@[ ! -e .config -o -f .config ] || { echo ".config is not a regular file:"; ls -dl .config; exit 1; } >&2

menuconfig nconfig: check-config
	@$(CT_ECHO) "  CONF  $@"
	$(SILENT)if [ ! -f .config ] || CT_VCHECK=strict $(bash) $(CT_LIB_DIR)/scripts/version-check.sh .config; then \
		$(CONF-$@) $(KCONFIG_TOP); \
	else \
		CT_VCHECK=warning $(CONF-$@) $(KCONFIG_TOP); \
	fi

oldconfig: .config check-config
	@$(CT_ECHO) "  CONF  $@"
	@$(bash) $(CT_LIB_DIR)/scripts/version-check.sh .config
	$(SILENT)$(CONF) --syncconfig $(KCONFIG_TOP)

olddefconfig: .config check-config
	@$(CT_ECHO) "  CONF  $@"
	@$(bash) $(CT_LIB_DIR)/scripts/version-check.sh .config
	$(SILENT)$(CONF) --$@ $(KCONFIG_TOP)

savedefconfig: .config check-config
	@$(CT_ECHO) '  GEN   $@'
	$(SILENT)CT_VCHECK=save $(CONF) --savedefconfig=$${DEFCONFIG-defconfig} $(KCONFIG_TOP)

defconfig: check-config
	@$(CT_ECHO) '  CONF  $@'
	$(SILENT)CT_VCHECK=save $(CONF) --defconfig=$${DEFCONFIG-defconfig} $(KCONFIG_TOP)

upgradeconfig: .config check-config
	$(SILENT)cp .config .config.before-upgrade
	$(SILENT)CT_UPGRADECONFIG=yes $(bash) $(CT_LIB_DIR)/scripts/version-check.sh .config
	@$(CT_ECHO) "Saving .config as .config.before-olddefconfig before running 'ct-ng olddefconfig'"
	$(SILENT)cp .config .config.before-olddefconfig
	$(SILENT)$(CONF) --olddefconfig $(KCONFIG_TOP)
	@$(CT_ECHO) "Done. You may now run 'ct-ng menuconfig' to edit the configuration."

# Always be silent, the stdout an be >.config
extractconfig:
	@$(awk) 'BEGIN { dump=0; }                                                  \
	         dump==1 && $$0~/^\[.....\][[:space:]]+(# )?CT_/ {                  \
	             $$1="";                                                        \
	             gsub("^[[:space:]]","");                                       \
	             print;                                                         \
	         }                                                                  \
	         $$0~/Dumping user-supplied crosstool-NG configuration: done in/ {  \
	             dump=0;                                                        \
	         }                                                                  \
	         $$0~/Dumping user-supplied crosstool-NG configuration$$/ {         \
	             dump=1;                                                        \
	         }'

# Help system
help:: help-head help-config help-samples help-build help-clean help-distrib help-env help-tail

help-head:: version
	@echo  'See below for a list of available actions, listed by category:'

help-config::
	@echo
	@echo  'Configuration actions:'

help-samples::
	@echo
	@echo  'Preconfigured toolchains (#: force number of // jobs):'

help-build::
	@echo
	@echo  'Build actions (#: force number of // jobs):'
	@echo  '  list-steps         - List all build steps'

help-clean::
	@echo
	@echo  'Clean actions:'

help-distrib::
	@echo
	@echo  'Distribution actions:'

help-env::
	@echo
	@if [ -r "@docdir@/manual/4_Building.md" ]; then \
		echo 'Environment variables (see @docdir@/0 - Table of content.txt):'; \
	else \
		echo 'Environment variables (see http://crosstool-ng.github.io/docs/build/)'; \
	fi
	@echo  '  STOP=step          - Stop the build just after this step (list with list-steps)'
	@echo  '  RESTART=step       - Restart the build just before this step (list with list-steps)'

help-tail::
	@echo
	@echo  'Use action "menuconfig" to configure your toolchain'
	@echo  'Use action "build" to build your toolchain'
	@echo  'Use action "version" to see the version'
	@echo  'See "man 1 $(notdir $(CT_NG))" for some help as well'

help-build::
	@echo  '  source             - Download sources for currently configured toolchain'
	@echo  '  build[.#]          - Build the currently configured toolchain'

help-clean::
	@echo  '  clean              - Remove generated files'
	@echo  '  distclean          - Remove generated files, configuration and build directories'

include $(CT_LIB_DIR)/samples/samples.mk
include $(CT_LIB_DIR)/scripts/scripts.mk

help-config::
	@echo  '  menuconfig         - Update current config using a menu based program'
	@echo  '  nconfig            - Update current config using a menu based program'
	@echo  '  oldconfig          - Update current config using a provided .config as base'
	@echo  '  upgradeconfig      - Upgrade config file to current crosstool-NG'
	@echo  '  extractconfig      - Extract to stdout the configuration items from a'
	@echo  '                       build.log file piped to stdin'
	@echo  '  savedefconfig      - Save current config as a mini-defconfig to $${DEFCONFIG}'
	@echo  '  defconfig          - Update config from a mini-defconfig $${DEFCONFIG}'
	@echo  '                       (default: $${DEFCONFIG}=./defconfig)'
	@echo  '  show-tuple         - Print the tuple of the currently configured toolchain'

help-distrib::

help-env::
	@echo  '  V=0|1|2|<unset>    - <unset> show only human-readable messages (default)'
	@echo  '                       0 => do not show commands or human-readable message'
	@echo  '                       1 => show only the commands being executed'
	@echo  '                       2 => show both'

# End help system

.config:
	@echo "There is no existing .config file!"
	@echo "You need to either run 'menuconfig',"
	@echo "or configure an existing sample."
	@false

show-tuple: .config
	$(SILENT)$(bash) $(CT_LIB_DIR)/scripts/show-tuple.sh '$${CT_TARGET}'

# Actual build
source: .config
	$(SILENT)CT_SOURCE=y $(bash) $(CT_LIB_DIR)/scripts/crosstool-NG.sh

build: .config
	$(SILENT)BUILD_NCPUS=`@CPU_COUNT@ 2>/dev/null || echo 0` \
        $(bash) $(CT_LIB_DIR)/scripts/crosstool-NG.sh

build.%:
	$(SILENT)$(MAKE) -rf $(CT_NG) build CT_JOBS=$*

# The _for_build steps are noop for native and cross,
# but are actual steps for canadian and cross-native.
# Please keep the last line with a '\' and keep the following empty line:
# it helps when diffing and merging.
# TBD move kernel headers and unify pass_1/pass_2?
CT_STEPS := \
            companion_tools_for_build  \
            companion_libs_for_build   \
            binutils_for_build         \
            companion_tools_for_host   \
            companion_libs_for_host    \
            binutils_for_host          \
            libc_headers               \
            cc_core_pass_1             \
            kernel_headers             \
            cc_core_pass_2             \
            libc_main                  \
            cc_for_build               \
            cc_for_host                \
            libc_post_cc               \
            companion_libs_for_target  \
            binutils_for_target        \
            debug                      \
            test_suite                 \
            finish                     \

# Keep an empty line above this comment, so the last
# back-slash terminated line works as expected.

# Make the list available to sub-processes (scripts/crosstool-NG.sh needs it)
export CT_STEPS

# Print the steps list
PHONY += list-steps
list-steps:
	@echo  'Available build steps, in order:'
	@for step in $(CT_STEPS); do    \
	     echo "  - $${step}";       \
	 done
	@echo  'Use "<step>" as action to execute only that step.'
	@echo  'Use "+<step>" as action to execute up to that step.'
	@echo  'Use "<step>+" as action to execute from that step onward.'

# ----------------------------------------------------------
# This part deals with executing steps

$(CT_STEPS):
	$(SILENT)$(MAKE) -rf $(CT_NG) V=$(V) RESTART=$@ STOP=$@ build

$(patsubst %,+%,$(CT_STEPS)):
	$(SILENT)$(MAKE) -rf $(CT_NG) V=$(V) STOP=$(patsubst +%,%,$@) build

$(patsubst %,%+,$(CT_STEPS)):
	$(SILENT)$(MAKE) -rf $(CT_NG) V=$(V) RESTART=$(patsubst %+,%,$@) build

PHONY += version
version:
	@echo 'This is crosstool-NG version $(CT_VERSION)'
	@echo
	@echo 'Copyright (C) 2008  Yann E. MORIN <yann.morin.1998@free.fr>'
	@echo 'This is free software; see the source for copying conditions.'
	@echo 'There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A'
	@echo 'PARTICULAR PURPOSE.'
	@echo

PHONY += clean
clean::
	@$(CT_ECHO) "  CLEAN log"
	$(SILENT)rm -f build.log
	@$(CT_ECHO) "  CLEAN build dir"
	$(SILENT)[ ! -d targets ] || chmod -R u+w targets
	$(SILENT)[ ! -d .build  ] || chmod -R u+w .build
	$(SILENT)rm -rf targets .build .build-all

PHONY += distclean
distclean:: clean
	@$(CT_ECHO) "  CLEAN .config"
	$(SILENT)rm -f .config .config.* ..config*