crosstool-NG(1)

NAME
@@CT_PROG_NAME@@, crosstool-NG - Build cross-toolchains

SYNOPSIS
@@CT_PROG_NAME@@ ACTION

DESCRIPTION
Building a cross-toolchain can be a real pain.

crosstool-NG makes it easy to build cross-toolchains, and allows you to take all the juice out of your target by configuring the different components of the toolchain according to the targeted processor.

ACTIONS
Here are the most commonly used actions. For other actions, please see @@CT_DOCDIR@@/0 - Table of content.txt

help
    Prints a little help text.

menuconfig
    Configures crosstool-NG using a configurator menu very similar to that of the Linux kernel.

oldconfig
    Apply options found in an existing .config file, and ask for newer options if there are any.

saveconfig
    Save the current crosstool-NG configuration, and associated components' config files, into a sample. Samples are saved in their own sub-directory, named after the target's tuple, in the samples sub-directory of the current directory. If that was not clear: `pwd`/samples/${CT_TARGET}/ Samples can be later recalled by calling @@CT_PROG_NAME@@ with the target tuple they represent.

savedefconfig
    Save the current configuration to a mini-defconfig file, that contains only the strictly required symbols to reproduce the configuration. defconfig files are much smaller than a complete .config, so it is easy to send by mail. As only non-default symbols are present in a defconfig, it easy to spot the meaningful values. Also, it is easy to use defconfig files with newer versions of crosstool-NG. By default the mini-defconfig is saved to a file named defconfig, unless the variable $DEFCONFIG is set, in which case the mini-defconfig will be saved to the file referenced by $DEFCONFIG. Note: only the .config file for crosstool-NG is saved. Config files for the components are not saved. Use saveconfig for that

defconfig
    Configure crosstool-NG using a mini-defconfig file (previously saved with savedefconfig or manually edited). The default mini-defconfig is read from the file defconfig, unless the variable $DEFCONFIG is set, in which case the mini-defconfig will be read from the file referenced by $DEFCONFIG

build
    Builds the configured toolchain.

clean
    Remove files generated by crosstool-NG for itself (these are mostly the configurators' binaries).

distclean
    Same as clean , but also removes the toolchain build directory, the downloaded files and the .config configuration file. The generated toolchain is left untouched, as well as samples which are not removed.

regtest
    Calls the crosstool-NG regression test suite. All samples are build, and the regression test suite is run against every one of them.

updatetools
    Updates the config.guess and config.sub scripts. These scripts are used by crosstool-NG to canonicalise the machines' name (host, build and target machines).

ENVIRONMENT

STOP, START
    Respectively stops and restarts the build just before this step. To restart a step, a previous build should have run at least to that step, or further. The list of steps is viewable with the action list-steps.

EXIT VALUE
The @@CT_PROG_NAME@@ frontend is in fact a make(1) script. See the man page for make(1) to have the meaning of the exit values.

BUGS
As of today (@@CT_DATE@@), building tarballs is broken. It is difficult to foresee how all parts of crosstool-NG are going to be installed. Each part is needed to build a tarball, as it contains all that is needed to rebuild the toolchain from scratch: toolchain components' sources, crosstool-NG configuration, but also all crosstool-NG scripts.

SECURITY
Don't run as root! Great care has been taken to avoid mistakes, but bug-free programs don't exist. During normal operation, crosstool-NG removes entire directories. If you run as root, and there is a bug or you mis-configured crosstool-NG, entire important directories could be removed (eg. /usr), although crosstool-NG will refuse to install toolchains in some well known critical directories.

AUTHORS
Please consult the file @@CT_DOCDIR@@/A - Credits.txt for a list of contributors.

SEE ALSO
You can find more in-depth documentation in @@CT_DOCDIR@@/0 - Table of content.txt. Please have a look at the