Creating a Cordapp

A Cordapp is an application that runs on the Corda platform using the platform APIs and plugin system. They are self contained in separate JARs from the node server JAR that are created and distributed.

App Plugins

Note

Currently apps are only supported for JVM languages.

To create an app plugin you must you must extend from CordaPluginRegistry. The JavaDoc contains specific details of the implementation, but you can extend the server in the following ways:

  1. Required protocols: Specify which protocols will be whitelisted for use in your web APIs.
  2. Service plugins: Register your services (see below).
  3. Web APIs: You may register your own endpoints under /api/ of the built-in web server.
  4. Static web endpoints: You may register your own static serving directories for serving web content.

Services

Services are classes which are constructed after the node has started. It is provided a ServiceHubInternal which allows a richer API than the ServiceHub exposed to contracts. It enables adding protocols, registering message handlers and more. The service does not run in a separate thread, so the only entry point to the service is during construction, where message handlers should be registered and threads started.

Starting Nodes

To use an app you must also have a node server. To create a node server run the gradle deployNodes task.

This will output the node JAR to build/libs/corda.jar and several sample/standard node setups to build/nodes. For now you can use the build/nodes/nodea configuration as a template.

Each node server by default must have a node.conf file in the current working directory. After first execution of the node server there will be many other configuration and persistence files created in a node workspace directory. This is specified as the basedir property of the node.conf file, or else can be overidden using --base-directory=<workspace>.

Note

Outside of development environments do not store your node directories in the build folder.

Warning

Also note that the bootstrapping process of the corda.jar unpacks the Corda dependencies into a temporary folder. It is therefore suggested that the CAPSULE_CACHE_DIR environment variable be set before starting the process to control this location.

Installing Apps

Once you have created your app JAR you can install it to a node by adding it to <node_dir>/plugins/. In this case the node_dir is the location where your node server’s JAR and configuration file is.

Note

If the directory does not exist you can create it manually.

Starting your Node

Now you have a node server with your app installed, you can run it by navigating to <node_dir> and running

java -jar corda.jar

The plugin should automatically be registered and the configuration file used.

Warning

If your working directory is not <node_dir> your plugins and configuration will not be used.

The configuration file and workspace paths can be overidden on the command line e.g.

java -jar corda.jar --config-file=test.conf --base-directory=/opt/r3corda/nodes/test.

Otherwise the workspace folder for the node is created based upon the basedir property in the node.conf file and if this is relative it is applied relative to the current working path.

Debugging your Node

To enable remote debugging of the corda process use a command line such as:

java -Dcapsule.jvm.args="-agentlib:jdwp=transport=dt_socket,server=y,suspend=y,address=5005" -jar corda.jar

This command line will start the debugger on port 5005 and pause the process awaiting debugger attachment.

Viewing persisted state of your Node

To make examining the persisted contract states of your node or the internal node database tables easier, and providing you are using the default database configuration used for demos, you should be able to connect to the internal node database over a JDBC connection at the URL that is output to the logs at node start up. That URL will be of the form jdbc:h2:tcp://<host>:<port>/node.

The user name and password for the login are as per the node data source configuration.

The name and column layout of the internal node tables is in a state of flux and should not be relied upon to remain static at the present time, and should certainly be treated as read-only.

Building Against Corda

Warning

This feature is subject to rapid change

Corda now supports publishing to Maven local to build against it. To publish to Maven local run the following in the root directory of Corda

./gradlew install

This will publish corda-$version.jar, finance-$version.jar, core-$version.jar and node-$version.jar to the group net.corda. You can now depend on these as you normally would a Maven dependency.

Gradle Plugins for Cordapps

There are several Gradle plugins that reduce your build.gradle boilerplate and make development of Cordapps easier. The available plugins are in the gradle-plugins directory of the Corda repository.

Building Gradle Plugins

To install to your local Maven repository the plugins that Cordapp gradle files require, run the following from the root of the Corda project:

./gradlew install

The plugins will now be installed to your local Maven repository in ~/.m2 on Unix and %HOMEPATH%.m2 on Windows.

Using Gradle Plugins

To use the plugins, if you are not already using the Cordapp template project, you must modify your build.gradle. Add the following segments to the relevant part of your build.gradle.

Template build.gradle

To build against Corda and the plugins that cordapps use, update your build.gradle to contain the following:

buildscript {
    ext.corda_version = '<enter the corda version you build against here>'
    ... your buildscript ...

    repositories {
        ... other repositories ...
        mavenLocal()
    }

    dependencies {
        ... your dependencies ...
        classpath "net.corda.plugins:cordformation:$corda_version"
        classpath "net.corda.plugins:quasar-utils:$corda_version"
        classpath "net.corda.plugins:publish-utils:$corda_version"
    }
}

apply plugin: 'net.corda.plugins.cordformation'
apply plugin: 'net.corda.plugins.quasar-utils'
apply plugin: 'net.corda.plugins.publish-utils'

repositories {
    mavenLocal()
    ... other repositories here ...
}

dependencies {
    compile "net.corda.core:$corda_version"
    compile "net.corda.finance:$corda_version"
    compile "net.corda.node:$corda_version"
    compile "net.corda.corda:$corda_version"
    ... other dependencies here ...
}

... your tasks ...

// Sets the classes for Quasar to scan. Loaded by the the quasar-utils plugin.
quasarScan.dependsOn('classes', ... your dependent subprojects...)

// Standard way to publish Cordapps to maven local with the maven-publish and publish-utils plugin.
publishing {
    publications {
        jarAndSources(MavenPublication) {
            from components.java
            // The two lines below are the tasks added by this plugin.
            artifact sourceJar
            artifact javadocJar
        }
    }
}

Cordformation

Cordformation is the local node deployment system for Cordapps, the nodes generated are intended to be used for experimenting, debugging, and testing node configurations and setups but not intended for production or testnet deployment.

To use this gradle plugin you must add a new task that is of the type net.corda.plugins.Cordform to your build.gradle and then configure the nodes you wish to deploy with the Node and nodes configuration DSL. This DSL is specified in the JavaDoc. An example of this is in the template-cordapp and below is a three node example;

task deployNodes(type: net.corda.plugins.Cordform, dependsOn: ['build']) {
    directory "./build/nodes" // The output directory
    networkMap "Controller" // The artemis address of the node named here will be used as the networkMapAddress on all other nodes.
    node {
        name "Controller"
        dirName "controller"
        nearestCity "London"
        advertisedServices = [ "corda.notary.validating" ]
        artemisPort 12345
        webPort 12346
        cordapps []
    }
    node {
        name "NodeA"
        dirName "nodea"
        nearestCity "London"
        advertisedServices = []
        artemisPort 31337
        webPort 31339
        cordapps []
    }
    node {
        name "NodeB"
        dirName "nodeb"
        nearestCity "New York"
        advertisedServices = []
        artemisPort 31338
        webPort 31340
        cordapps []
    }
}

You can create more configurations with new tasks that extend Cordform.

New nodes can be added by simply adding another node block and giving it a different name, directory and ports. When you run this task it will install the nodes to the directory specified and a script will be generated (for UNIX users only at present) to run the nodes with one command (runnodes). On MacOS X this script will run each node in a new terminal tab, and on Linux it will open up a new XTerm for each node. On Windows the (runnodes.bat) script will run one node per window.

Other cordapps can also be specified if they are already specified as classpath or compile dependencies in your build.gradle.