* wip
* wip
* wip (need to review IEE comments)
* wip
* wip
* Small refactoring, fixed network-verifier's TestNotaryFlow
* Added command line option to explicitly enable hash agility support
* wip-do-not-push
* wip
* wip
* wip
* aligned merkletree/transaction hash algorithms
* wip
* Added mixed algorithm support for nodes vs leaves and corrected mixed algorithm tests
* moved global computeNonce and componentHash to DigestService
* added comment for failing test to fix
* wip
* Minor cleanups, added deprecated componentHash/computeNonce
* restored exploratory changes to failing SignedTransaction test
* cleaned up and minor rafactoring
* Fixed some tests with hardcoded hash algorithm
* some changes and cleanups following code review
* WIP commit before large change
* WIP Fixed 3 tests
* WIP removed direct references to randomSHA256() and sha256()
* Updated/added liquibase migrations to support larger hash algorithms
* Reviewed, cleanups, comments, fixes
* removing direct references to sha256()
* WIP verifying obligations test errors
* reviewing obligation/attachment issues with sha3_256
* Full review before PR - intermediate commits
* Reviewed and cleaned up
* Futher cleanup
* Fixed partial tree backward compatible json and cleanups
* all tests passing
* Removed couple of unused imports
* Reworked global componentHash function to avoid deprecated warnings
* replaced SHA3s with some alternate SHA2s
* Removed SHA3-256 and SHA3-512 references
* fixed some tests using non ubiquitous hash algorithms
* Fixed ABI compatibility (not for TransactionBuilder)
* Fixed ABI compatibility to TransactionBuilder
* couple of fixes
* fixed DigestService's randomHash
* Removed constructor with loosely typed args for private constructor of LedgerTransaction class (API removal)
* re-introduced LedgerTransaction deprecated ctor for deserialization
* Add possibility to load CustomMessageDigest bypassing JCA (#6798)
* Change api-current for DigestAlgorithm
* disable flaky tests
Co-authored-by: Denis Rekalov <denis.rekalov@r3.com>
Test was flaky because the flow can finish below it can be killed,
therefore failing the test. Sleep for 1 minute instead to give plenty of
time for the test.
Created a database snapshot of a clean Corda OS 4.5.1 database, which can now be used for testing by both the node driver and mock network.
The MockNetwork was changed from using an in memory database to using an on disk database, and makes use of the snapshot to speed up setup times.
The Node Driver was changed from defaulting to an in-memory database to defaulting to an on-disk database. Tests that do not specify the type of database to use will thus use an on-disk database. Tests that opt in for an in-memory database will continue to use an in-memory database as before.
The database snapshots are copied to the node directory inside the build folder, therefore, they should be cleaned up after a build.
Co-authored-by: Ross Nicoll <ross.nicoll@r3.com>
* INFRA-424 linux1 jenkinsfile
* INFRA-424 full run
* INFRA-424 bigger heap size
* Upgraded DJVM to handle BC - latest version of BC is a multirelease JAR.
When reading JKS keystore if a BC EdDSAPrivateKey is returned then swap for a net.i2p EdDSA private key.
* Temporary downgrade of BC
* Removed the BC EdDSA conversion
* INFRA-424 bigger heap size
* Upgrading Quasar to handle openJ9 different fields.
* INFRA-424: Handle lack of SUPPRESSED_SENTINEL in openj9.
* INFRA-424: If BCEdDSA public or private key is generated convert to net.i2p EdDSA form.
* INFRA-424 bigger heap size
* INFRA-424: On openJ9 only getting upto milli resolution.
* INFRA-424: Handle keystore returning a BCEdDSAPrivateKey.
* INFRA-424: Disable test on JDK11, as it requires the custom cordapp to generate JDK8 contract code, which we now check for.
* INFRA-424: Truncated time test to resolution of millis for openj9.
* INFRA-424 disabling log intensive tests until a fix is developed
* INFRA-424 one more test disabled
* INFRA-424: Disabled a couple of tests failing on openj9.
* INFRA-424: Disabling failing openj9 tests.
* INFRA-424: Disabling test failing on openj9.
* INFRA-424: Ignoring another flaky sleep test on openj9.
* INFRA-424 run integrationTests
* INFRA-424 set timeout to 4 hours
* INFRA-424: Cope with exception message from openj9.
* INFRA-424: Handle the coloured text characters openj9 adds.
* INFRA-424: Disabling test as it is generating JDK11 contract code under JDK11. Currently on JDK8 contract code allowed.
* INFRA-424: Commenting test out for openj9. Output of the processs thats read by the test is sometimes garbled.
* INFRA-424 switching to smoke tests
* INFRA-424 switching to slow integration tests
* INFRA-424 full run
* INFRA-424 moving jenkinsfile
* INFRA-424 removing references
* INFRA-424: Created common IS_OPENJ9 func for ignoring tests.
Co-authored-by: Schife <razvan.codreanu@r3.com>
* CORDA-4003: Now cope with file: prefix not being in class path element.
* CORDA-4003: Switched to new URL type filter.
* CORDA-4003: Switched to a URL comparison. In the string comparison the scheme was removed in latest version of classgraph.
* CORDA-4003: Moved to latest version of classgraph that has support for + in filenames.
* CORDA-4003: Switched to accept version of the deprecated classgraph methods.
* CORDA-3960: Port MultiRPCClient to OS
* CORDA-3960: Carefully restore serialisation environment in `MultiRpcClientTest` to eliminate side effects on other tests
* CORDA-3960: Move ThreadDumpUtils.kt to `core-utils`
* CORDA-3657 Extract information from state machine
`FlowReadOperations` interface provides functions that extract
information about flows from the state machine manager.
`FlowOperator` implements this interface (along with another currenly
empty interface).
* CORDA-3657 Rename function and use set
* initial test is passing
* wip
* done tests
* additional tests to cover more FlowIORequest variations
* completed tests
* The quasar.jar should nat have been changed
* Fixed issues reported by detekt
* got rid of sync objects, instead relying on nodes being offline
* Added extra grouping test and minor simplification
* Hospital test must use online node which fails on otherside
* Added additional information required for the ENT
* Added tests to cover SEND FlowIORequests
* using node name constants from the core testing module
* Changed flow operator to the query pattern
* made query fields mutable to simply building query
* fixed detekt issue
* Fixed test which had dependency on the order int the result (failed for windows)
* Fixed recommendations in PR
* Moved WrappedFlowExternalOperation and WrappedFlowExternalAsyncOperation to FlowExternalOperation.kt as per PR comment
* Moved extension to FlowAsyncOperation
* removed unnecessarily brackets
Co-authored-by: LankyDan <danknewton@hotmail.com>
* CORDA-3663 MockServices crashes when two of the provided packages to scan are deemed empty in 4.4 RC05
this happends when a given package is not found on the classpath. Now it is handled and an exception is thrown
* replace dummy package names in tests with valid ones
* allow empty package list for CustomCordapps and exclude those from the created jars
* detekt fix
* always true logic fix
* fix to check for empty packages instead of empty classes
* fix for classes and fixups
* logic refactor because of detekt stupidity
* PR related minor refactors
Enable reloading of a flow after every checkpoint is saved. This
includes reloading the checkpoint from the database and recreating the
fiber.
When a flow and its `StateMachineState` is created it checks the node's
config to see if the `reloadCheckpointAfterSuspend` is set to true. If it is
it initialises `StateMachineState.reloadCheckpointAfterSuspendCount`
with the value 0. Otherwise, it remains `null`.
This count represents how many times the flow has reloaded from its
checkpoint (not the same as retrying). It is incremented every time the
flow is reloaded.
When a flow suspends, it processes the suspend event like usual, but
it will now also check if `reloadCheckpointAfterSuspendCount` is not
`null` (that it is activated) and process a
`ReloadFlowFromCheckpointAfterSuspend`event, if and only if
`reloadCheckpointAfterSuspendCount` is greater than
`CheckpointState.numberOfSuspends`.
This means idempotent flows can reload from the start and not reload
again until reaching a new suspension point.
Flows that skip checkpoints can reload from a previously saved
checkpoint (or from the initial checkpoint) and will continue reloading
on reaching the next new suspension point (not the suspension point that
it skipped saving).
If the flow fails to deserialize the checkpoint from the database upon
reloading a `ReloadFlowFromCheckpointException` is throw. This causes
the flow to be kept for observation.
* CORDA-3844: Add new functions to network map client
* CORDA-3844: Apply new fetch logic to nm updater
* CORDA-3844: Fix base url and warnings
* CORDA-3844: Change response object and response validation
In order to make sure that the returned node infos are not maliciously modified, either a signed list response
or a signed reference object would need to be provided. As providing a signed list requires a lot of effort from NM and Signer services,
the signed network map is provided instead, allowing nodes to validate that the list provided conforms to the entries of the signed network map.
* CORDA-3844: Add clarifications and comments
* CORDA-3844: Add error handling for bulk request
* CORDA-3844: Enhance testing
* CORDA-3844: Fix detekt issues
* EG-3844: Apply pr suggestions
* CORDA-3845: Update BC to 1.64
* CORDA-3845: Upgraded log4j to 2.13.3
* We can remove the use of Manifests from the logging package so that when _it_ logs it doesn't error on the fact the stream was already closed by the default Java logger.
* Some more tidy up
* Remove the logging package as a plugin
* latest BC version
* Remove old test
* fix up
* Fix some rebased changes to log file handling
* Fix some rebased changes to log file handling
* Update slf4j too
Co-authored-by: Adel El-Beik <adel.el-beik@r3.com>
* CORDA-3717: Apply custom serializers to checkpoints
* Remove try/catch to fix TooGenericExceptionCaught detekt rule
* Rename exception
* Extract method
* Put calls to the userSerializer on their own lines to improve readability
* Remove unused constructors from exception
* Remove unused proxyType field
* Give field a descriptive name
* Explain why we are looking for two type parameters when we only use one
* Tidy up the fetching of types
* Use 0 seconds when forcing a flow checkpoint inside test
* Add test to check references are restored correctly
* Add CheckpointCustomSerializer interface
* Wire up the new CheckpointCustomSerializer interface
* Use kryo default for abstract classes
* Remove unused imports
* Remove need for external library in tests
* Make file match original to remove from diff
* Remove maySkipCheckpoint from calls to sleep
* Add newline to end of file
* Test custom serializers mapped to interfaces
* Test serializer configured with abstract class
* Move test into its own package
* Rename test
* Move flows and serializers into their own source file
* Move broken map into its own source file
* Delete comment now source file is simpler
* Rename class to have a shorter name
* Add tests that run the checkpoint serializer directly
* Check serialization of final classes
* Register as default unless the target class is final
* Test PublicKey serializer has not been overridden
* Add a broken serializer for EdDSAPublicKey to make test more robust
* Split serializer registration into default and non-default registrations. Run registrations at the right time to preserve Cordas own custom serializers.
* Check for duplicate custom checkpoint serializers
* Add doc comments
* Add doc comments to CustomSerializerCheckpointAdaptor
* Add test to check duplicate serializers are logged
* Do not log the duplicate serializer warning when the duplicate is the same class
* Update doc comment for CheckpointCustomSerializer
* Sort serializers by classname so we are not registering in an unknown or random order
* Add test to serialize a class that references itself
* Store custom serializer type in the Kryo stream so we can spot when a different serializer is being used to deserialize
* Testing has shown that registering custom serializers as default is more robust when adding new cordapps
* Remove new line character
* Remove unused imports
* Add interface net.corda.core.serialization.CheckpointCustomSerializer to api-current.txt
* Remove comment
* Update comment on exception
* Make CustomSerializerCheckpointAdaptor internal
* Revert "Add interface net.corda.core.serialization.CheckpointCustomSerializer to api-current.txt"
This reverts commit b835de79bd.
* Restore "Add interface net.corda.core.serialization.CheckpointCustomSerializer to api-current.txt""
This reverts commit 718873a4e9.
* Pass the class loader instead of the context
* Do less work in test setup
* Make the serialization context unique for CustomCheckpointSerializerTest so we get a new Kryo pool for the test
* Rebuild the Kryo pool for the given context when we change custom serializers
* Rebuild all Kryo pools on serializer change to keep serializer list consistent
* Move the custom serializer list into CheckpointSerializationContext to reduce scope from global to a serialization context
* Remove unused imports
* Make the new checkpointCustomSerializers property default to the empty list
* Delegate implementation using kotlin language feature
Introducing a new flow start method (`startFlowDynamicWithClientId`) passing in a `clientId`.
Once `startFlowDynamicWithClientId` gets called, the `clientId` gets injected into `InvocationContext` and also pushed to the logging context.
If a new flow starts with this method, then a < `clientId` to flow > pair is kept on node side, even after the flow's lifetime. If `startFlowDynamicWithClientId` is called again with the same `clientId` then the node identifies that this `clientId` refers to an existing < `clientId` to flow > pair and returns back to the rpc client a `FlowStateMachineHandle` future, created out of that pair.
`FlowStateMachineHandle` interface was introduced as a thinner `FlowStateMachine`. All `FlowStateMachine` properties used by call sites are moved into this new interface along with `clientId` and then `FlowStateMachine` extends it.
Introducing an acknowledgement method (`removeClientId`). Calling this method removes the < `clientId` to flow > pair on the node side and frees resources.
* CORDA-3769: Switched attachments class loader cache to use caffeine with original implementation used by determinstic core.
* CORDA-3769: Removed default ctor arguments.
* CORDA-3769: Switched mapping function to Function type to avoid synthetic method being generated.
* CORDA-3769: Now using a cache created from NamedCacheFactory for the attachments class loader cache.
* CORDA-3769: Making detekt happy.
* CORDA-3769: The finality tests now check for UntrustedAttachmentsException which will actually happen in reality.
* CORDA-3769: Refactored after review comments.
* CORDA-3769: Removed the AttachmentsClassLoaderSimpleCacheImpl as DJVM does not need it. Also updated due to review comments.
* CORDA-3769: Removed the generic parameters from AttachmentsClassLoader.
* CORDA-3769: Removed unused imports.
* CORDA-3769: Updates from review comments.
* CORDA-3769: Updated following review comments. MigrationServicesForResolution now uses cache factory. Ctor updated for AttachmentsClassLoaderSimpleCacheImpl.
* CORDA-3769: Reduced max class loader cache size
* CORDA-3769: Fixed the attachments class loader cache size to a fixed default
* CORDA-3769: Switched attachments class loader size to be reduced by fixed value.
Wait for log file to indicate that a driver node process is running, instead of trying to open a socket on the port the node is attempting to binding on. This means the driver is more responsive to the node being ready, as well as removing a race condition where the binding test could block the node from starting.
As sometimes nodes do not log this information, after 20 seconds we presume the node is up.
* Add schema migration to smoke tests
* Fix driver to work correctly for out-of-proc node with persistent database.
Co-authored-by: Ross Nicoll <ross.nicoll@r3.com>
