Remove memory leak endurance test as it spends 8 minutes testing a single failure case that's not end user visible,
and ultimately manifests elsewhere in test failures (which is where this came from in the beginning). It was a good
idea to confirm the change fixed the issue, but this isn't critical enough to retain.
Making statemachine not remove COMPLETED flows' checkpoints from the database
if they are started with a clientId, instead they are getting persisted and retained within
the database along with their result (`DBFlowResult`).
On flow start with a client id (`startFlowDynamicWithClientId`), if the client id maps to
a flow that was previously started with the same client id and the flow is now finished,
then fetch the `DBFlowResult` from the database to construct a
`FlowStateMachineHandle` done future and return it back to the client.
Object stored as results must abide by the storage serializer rules. If they fail to do so
the result will not be stored and an exception is thrown to the client to indicate this.
Enable reloading of a flow after every checkpoint is saved. This
includes reloading the checkpoint from the database and recreating the
fiber.
When a flow and its `StateMachineState` is created it checks the node's
config to see if the `reloadCheckpointAfterSuspend` is set to true. If it is
it initialises `StateMachineState.reloadCheckpointAfterSuspendCount`
with the value 0. Otherwise, it remains `null`.
This count represents how many times the flow has reloaded from its
checkpoint (not the same as retrying). It is incremented every time the
flow is reloaded.
When a flow suspends, it processes the suspend event like usual, but
it will now also check if `reloadCheckpointAfterSuspendCount` is not
`null` (that it is activated) and process a
`ReloadFlowFromCheckpointAfterSuspend`event, if and only if
`reloadCheckpointAfterSuspendCount` is greater than
`CheckpointState.numberOfSuspends`.
This means idempotent flows can reload from the start and not reload
again until reaching a new suspension point.
Flows that skip checkpoints can reload from a previously saved
checkpoint (or from the initial checkpoint) and will continue reloading
on reaching the next new suspension point (not the suspension point that
it skipped saving).
If the flow fails to deserialize the checkpoint from the database upon
reloading a `ReloadFlowFromCheckpointException` is throw. This causes
the flow to be kept for observation.
* CORDA-3844: Add new functions to network map client
* CORDA-3844: Apply new fetch logic to nm updater
* CORDA-3844: Fix base url and warnings
* CORDA-3844: Change response object and response validation
In order to make sure that the returned node infos are not maliciously modified, either a signed list response
or a signed reference object would need to be provided. As providing a signed list requires a lot of effort from NM and Signer services,
the signed network map is provided instead, allowing nodes to validate that the list provided conforms to the entries of the signed network map.
* CORDA-3844: Add clarifications and comments
* CORDA-3844: Add error handling for bulk request
* CORDA-3844: Enhance testing
* CORDA-3844: Fix detekt issues
* EG-3844: Apply pr suggestions
* CORDA-3845: Update BC to 1.64
* CORDA-3845: Upgraded log4j to 2.13.3
* We can remove the use of Manifests from the logging package so that when _it_ logs it doesn't error on the fact the stream was already closed by the default Java logger.
* Some more tidy up
* Remove the logging package as a plugin
* latest BC version
* Remove old test
* fix up
* Fix some rebased changes to log file handling
* Fix some rebased changes to log file handling
* Update slf4j too
Co-authored-by: Adel El-Beik <adel.el-beik@r3.com>
* CORDA-3717: Apply custom serializers to checkpoints
* Remove try/catch to fix TooGenericExceptionCaught detekt rule
* Rename exception
* Extract method
* Put calls to the userSerializer on their own lines to improve readability
* Remove unused constructors from exception
* Remove unused proxyType field
* Give field a descriptive name
* Explain why we are looking for two type parameters when we only use one
* Tidy up the fetching of types
* Use 0 seconds when forcing a flow checkpoint inside test
* Add test to check references are restored correctly
* Add CheckpointCustomSerializer interface
* Wire up the new CheckpointCustomSerializer interface
* Use kryo default for abstract classes
* Remove unused imports
* Remove need for external library in tests
* Make file match original to remove from diff
* Remove maySkipCheckpoint from calls to sleep
* Add newline to end of file
* Test custom serializers mapped to interfaces
* Test serializer configured with abstract class
* Move test into its own package
* Rename test
* Move flows and serializers into their own source file
* Move broken map into its own source file
* Delete comment now source file is simpler
* Rename class to have a shorter name
* Add tests that run the checkpoint serializer directly
* Check serialization of final classes
* Register as default unless the target class is final
* Test PublicKey serializer has not been overridden
* Add a broken serializer for EdDSAPublicKey to make test more robust
* Split serializer registration into default and non-default registrations. Run registrations at the right time to preserve Cordas own custom serializers.
* Check for duplicate custom checkpoint serializers
* Add doc comments
* Add doc comments to CustomSerializerCheckpointAdaptor
* Add test to check duplicate serializers are logged
* Do not log the duplicate serializer warning when the duplicate is the same class
* Update doc comment for CheckpointCustomSerializer
* Sort serializers by classname so we are not registering in an unknown or random order
* Add test to serialize a class that references itself
* Store custom serializer type in the Kryo stream so we can spot when a different serializer is being used to deserialize
* Testing has shown that registering custom serializers as default is more robust when adding new cordapps
* Remove new line character
* Remove unused imports
* Add interface net.corda.core.serialization.CheckpointCustomSerializer to api-current.txt
* Remove comment
* Update comment on exception
* Make CustomSerializerCheckpointAdaptor internal
* Revert "Add interface net.corda.core.serialization.CheckpointCustomSerializer to api-current.txt"
This reverts commit b835de79bd.
* Restore "Add interface net.corda.core.serialization.CheckpointCustomSerializer to api-current.txt""
This reverts commit 718873a4e9.
* Pass the class loader instead of the context
* Do less work in test setup
* Make the serialization context unique for CustomCheckpointSerializerTest so we get a new Kryo pool for the test
* Rebuild the Kryo pool for the given context when we change custom serializers
* Rebuild all Kryo pools on serializer change to keep serializer list consistent
* Move the custom serializer list into CheckpointSerializationContext to reduce scope from global to a serialization context
* Remove unused imports
* Make the new checkpointCustomSerializers property default to the empty list
* Delegate implementation using kotlin language feature
Refactor `FlowStateMachineImpl.transientValues` and
`FlowStateMachineImpl.transientState` to stop the fields from exposing
the fact that they are nullable.
This is done by having private backing fields `transientValuesReference`
and `transientStateReference` that can be null. The nullability is still
needed due to serialisation and deserialisation of flow fibers. The
fields are transient and therefore will be null when reloaded from the
database.
Getters and setters hide the private field, allowing a non-null field to
returned.
There is no point other than in `FlowCreator` where the transient fields
can be null. Therefore the non null checks that are being made are
valid.
Add custom kryo serialisation and deserialisation to `TransientValues`
and `StateMachineState` to ensure that neither of the objects are ever
touched by kryo.
Introducing a new flow start method (`startFlowDynamicWithClientId`) passing in a `clientId`.
Once `startFlowDynamicWithClientId` gets called, the `clientId` gets injected into `InvocationContext` and also pushed to the logging context.
If a new flow starts with this method, then a < `clientId` to flow > pair is kept on node side, even after the flow's lifetime. If `startFlowDynamicWithClientId` is called again with the same `clientId` then the node identifies that this `clientId` refers to an existing < `clientId` to flow > pair and returns back to the rpc client a `FlowStateMachineHandle` future, created out of that pair.
`FlowStateMachineHandle` interface was introduced as a thinner `FlowStateMachine`. All `FlowStateMachine` properties used by call sites are moved into this new interface along with `clientId` and then `FlowStateMachine` extends it.
Introducing an acknowledgement method (`removeClientId`). Calling this method removes the < `clientId` to flow > pair on the node side and frees resources.
* CORDA-3769: Switched attachments class loader cache to use caffeine with original implementation used by determinstic core.
* CORDA-3769: Removed default ctor arguments.
* CORDA-3769: Switched mapping function to Function type to avoid synthetic method being generated.
* CORDA-3769: Now using a cache created from NamedCacheFactory for the attachments class loader cache.
* CORDA-3769: Making detekt happy.
* CORDA-3769: The finality tests now check for UntrustedAttachmentsException which will actually happen in reality.
* CORDA-3769: Refactored after review comments.
* CORDA-3769: Removed the AttachmentsClassLoaderSimpleCacheImpl as DJVM does not need it. Also updated due to review comments.
* CORDA-3769: Removed the generic parameters from AttachmentsClassLoader.
* CORDA-3769: Removed unused imports.
* CORDA-3769: Updates from review comments.
* CORDA-3769: Updated following review comments. MigrationServicesForResolution now uses cache factory. Ctor updated for AttachmentsClassLoaderSimpleCacheImpl.
* CORDA-3769: Reduced max class loader cache size
* CORDA-3769: Fixed the attachments class loader cache size to a fixed default
* CORDA-3769: Switched attachments class loader size to be reduced by fixed value.
Cancel the future being run by a flow when finishing or retrying it. The
cancellation of the future no longer cares about what type of future it
is.
`StateMachineState` has the `future` field, which holds the 3
(currently) possible types of futures:
- sleep
- wait for ledger commit
- async operation / external operation
Move the starting of all futures triggered by actions into
`ActionFutureExecutor`.
* Add schema migration to smoke tests
* Fix driver to work correctly for out-of-proc node with persistent database.
Co-authored-by: Ross Nicoll <ross.nicoll@r3.com>
Changes to `TopLevelTransition` after merging from earlier releases.
When a flow is kept for observation and its checkpoint is saved as
HOSPITALIZED in the database, we must acknowledge the session init and
flow start events so that they are not replayed on node startup.
Otherwise the same flow will be ran twice when the node is restarted,
one from the checkpoint and one from artemis.
Reduce exception_message and stack_trace lengths in table node_flow_exceptions from 4000 to 2000 to fix Oracle failing with: 'ORA-00910: specified length too long for its datatype'
These tests were removed after doing a merge from 4.4. They needed
updating after the changes from 4.4 anyway. These have been included in
this change.
Also fix kill flow tests and send initial tests.
When an uncaught exception propagates all the way to the flow exception
handler, the flow will be forced into observation/hospitalised.
The updating of the checkpoints status is done on a separate thread as
the fiber cannot be relied on anymore. The new thread is needed to allow
database transaction to be created and committed. Failures to the status
update will be rescheduled to ensure that this information is eventually
reflected in the database.
* Move log messages that are not useful in typical usage from info to debug level to reduce log spam.
* Add node startup check before attempting to connect.
In enterprise, `AuthDBTests` picked up a schema from a unit test and
included it in the cordapp it builds. This schema does not have a
migration and therefore fails the integration tests.
`NodeBasedTest` now lets cordapps to be defined and passed in to avoid
this issue. It defaults to making a cordapp from the tests base
directory if none are provided.
When a non-database exception is thrown out of a `withEntityManager`
block, always check if the session needs to be rolled back.
This means if a database error is caught and a new non-database error is
thrown out of the `withEntityManager` block, the transaction is still
rolled back. The flow can then continue progressing as normal.
* CORDA-3722 withEntityManager can rollback its session
Improve the handling of database transactions when using
`withEntityManager` inside a flow.
Extra changes have been included to improve the safety and
correctness of Corda around handling database transactions.
This focuses on allowing flows to catch errors that occur inside an
entity manager and handle them accordingly.
Errors can be caught in two places:
- Inside `withEntityManager`
- Outside `withEntityManager`
Further changes have been included to ensure that transactions are
rolled back correctly.
Errors caught inside `withEntityManager` require the flow to manually
`flush` the current session (the entity manager's individual session).
By manually flushing the session, a `try-catch` block can be placed
around the `flush` call, allowing possible exceptions to be caught.
Once an error is thrown from a call to `flush`, it is no longer possible
to use the same entity manager to trigger any database operations. The
only possible option is to rollback the changes from that session.
The flow can continue executing updates within the same session but they
will never be committed. What happens in this situation should be handled
by the flow. Explicitly restricting the scenario requires a lot of effort
and code. Instead, we should rely on the developer to control complex
workflows.
To continue updating the database after an error like this occurs, a new
`withEntityManager` block should be used (after catching the previous
error).
Exceptions can be caught around `withEntityManager` blocks. This allows
errors to be handled in the same way as stated above, except the need to
manually `flush` the session is removed. `withEntityManager` will
automatically `flush` a session if it has not been marked for rollback
due to an earlier error.
A `try-catch` can then be placed around the whole of the
`withEntityManager` block, allowing the error to be caught while not
committing any changes to the underlying database transaction.
To make `withEntityManager` blocks work like mini database transactions,
save points have been utilised. A new savepoint is created when opening
a `withEntityManager` block (along with a new session). It is then used
as a reference point to rollback to if the session errors and needs to
roll back. The savepoint is then released (independently from
completing successfully or failing).
Using save points means, that either all the statements inside the
entity manager are executed, or none of them are.
- A new session is created every time an entity manager is requested,
but this does not replace the flow's main underlying database session.
- `CordaPersistence.transaction` can now determine whether it needs
to execute its extra error handling code. This is needed to allow errors
escape `withEntityManager` blocks while allowing some of our exception
handling around subscribers (in `NodeVaultService`) to continue to work.
## Summary
This change deals with multiple issues:
* Errors that occur during flow initialisation.
* Errors that occur when handling the outcome of an existing flow error.
* Failures to rollback and close a database transaction when an error
occurs in `TransitionExecutorImpl`.
* Removal of create and commit transaction actions around retrying a flow.
## Errors that occur during flow initialisation
Flow initialisation has been moved into the try/catch that exists inside
`FlowStateMachineImpl.run`. This means if an error is thrown all the way
out of `initialiseFlow` (which should rarely happen) it will be caught
and move into a flow's standard error handling path. The flow should
then properly terminate.
`Event.Error` was changed to make the choice to rollback be optional.
Errors during flow initialisation cause the flow to not have a open
database transaction. Therefore there is no need to rollback.
## Errors that occur when handling the outcome of an existing flow error
When an error occurs a flow goes to the flow hospital and is given an
outcome event to address the original error. If the transition that was
processing the error outcome event (`StartErrorPropagation` and
`RetryFlowFromSafePoint`) has an error then the flow aborts and
nothing happens. This means that the flow is left in a runnable state.
To resolve this, we now retry the original error outcome event whenever
another error occurs doing so.
This is done by adding a new staff member that looks for
`ErrorStateTransitionException` thrown in the error code path of
`TransitionExecutorImpl`. It then takes the last outcome for that flow
and schedules it to run again. This scheduling runs with a backoff.
This means that a flow will continually retry the original error outcome
event until it completes it successfully.
## Failures to rollback and close a database transaction when an error occurs in `TransitionExecutorImpl`
Rolling back and closing the database transaction inside of
`TransitionExecutorImpl` is now done inside individual try/catch blocks
as this should not prevent the flow from continuing.
## Removal of create and commit transaction actions around retrying a flow
The database commit that occurs after retrying a flow can fail which
required some custom code just for that event to prevent inconsistent
behaviour. The transaction was only needed for reading checkpoints from
the database, therefore the transaction was moved into
`retryFlowFromSafePoint` instead and the commit removed.
If we need to commit data inside of `retryFlowFromSafePoint` in the
future, a commit should be added directly to `retryFlowFromSafePoint`.
The commit should occur before the flow is started on a new fiber.
The state machines state is held within `InnerState` which lived inside
the SMM. `InnerState` has been extracted out of the SMM to allow the SMM
to be refactored in the future. Smaller classes can now be made that
focus on a single goal as the locking of the state can be accessed from
external classes. To achieve this, pass the `InnerState` into the class
and request a lock if needed.
The locking of `InnerState` has been made a property of the `InnerState`
itself. It has a `lock` field that allows locks to be taken out when
needed.
An inline `withLock` function has been added to tidy up the code and not
harm performance.
Some classes have been made internal to prevent invalid usage of purely
node internal classes.
As part of this change, flow timeouts have been extracted out into
`FlowTimeoutScheduler`.
Only hit the database if `StateMachineState.isAnyCheckpointPersisted`
returns true. Otherwise, there will be no checkpoint to retrieve from the
database anyway. This can prevent errors due to a transient loss of
connection to the database.
Update tests after merging to 4.6
* Decouple DatabaseConfig and CordaPersistence etc.
* Add schema sync to schema migration + test
* Add command line parameters for synchronising schema
Only hit the database if `StateMachineState.isAnyCheckpointPersisted`
returns true. Otherwise, there will be no checkpoint to retrieve from the
database anyway. This can prevent errors due to a transient loss of
connection to the database.
* CORDA-3578 add corda prefix to conf file names as original issue was having non-corda reference.conf files on classpath causes DriverDSLImp failure
it is better to have this naming convention and avoid further conflicts of conf files.
* fixed weird duplicates
* revert renaming changes for web-reference.conf and loadtest-reference.conf
* Ensure logs directory is written to correct location
* Remove a superfluous set of log path property
* Add a unit test to catch bad log paths
* Address detekt issues
* checking for unsigned cordapps in prod mode and shutting down if it the contracts are not signed
* inheriting from CordaRuntimeException instead of Exception
* had the same tests twice, removed the shutdown for minimumplatformversion, modified some of the tests
* shut down when we get invalid platformversion and modified the test according to this
* making the message more accurate
* CORDA-3176 Inefficient query generated on vault queries with custom paging
a check added to avoid self joins
local postgres db tests were executed on large volume test data (50k states) to ensure that the DB optimizes the suspicious query and so it does not cuase performance issues.
A test added to check that a pagination query on large volume of sorted data is completed in a reasonable time
* foreach detekt fix
Adding to the query -explicitly- the flow's locked states resolved the SQL Deadlocks in SQL server. The SQL Deadlocks would come up from `softLockRelease` when only the `lockId` was passed in as argument. In that case the query optimizer would use `lock_id_idx(lock_id, state_status)` to search and update entries in `VAULT_STATES` table.
However, all rest of the queries would follow the opposite direction meaning they would use PK's `index(output_index, transaction_id)` but they would also update the `lock_id` column and therefore the `lock_id_idx` as well, because `lock_id` is a part of it. That was causing a circular locking among the different transactions (SQL processes) within the database.
To resolve this, whenever a flow attempts to reserve soft locks using their flow id (remember the flow id is always the flow id for the very first flow in the flow stack), we then save these states to the fiber. Then, upon releasing soft locks the fiber passes that set to the release soft locks query. That way the database query optimizer will use the primary key index of VAULT_STATES table, instead of lock_id_idx in order to search rows to update. That way the query will be aligned with the rest of the queries that are following that route as well (i.e. making use of the primary key), and therefore its locking order of resources within the database will be aligned with the rest queries' locking orders (solving SQL deadlocks).
* Fixed SQL deadlocks caused from softLockRelease, by saving locked states per fiber; NodeVaultService.softLockRelease query then uses VAULT_STATES PK index instead of lock_id_idx
Speed up SQL server by breaking down queries with > 16 elements in their IN clause, into sub queries with 16 elements max in their IN clauses
* Allow softLockedStates to remove states
* Add to softLockedStates only states soft locked under our flow id
* Fix softLockRelease not to take into account flowStateMachineImpl.softLockedStates when using lockId != ourFlowId
* Moved CriteriaBuilder.executeUpdate at the bottom of the file
Performance tuning of the new checkpoint schema;
- Checkpoint tables are now using `flowId` as join keys.
- Indexes consist of a PK's index on `node_checkpoints(flow_id)` and then unique indexes on `node_checkpoint_blobs(flow_id)` and `node_flow_metadata(flow_id)`.
- Serialization of `checkpointState` is being done with `CHECKPOINT_CONTEXT` so that we can have compression. This is needed when messages get passed into `checkpointState.sessions` therefore `checkpointState` grows in size upon serialized and
saved into the database.
* Deserialize checkpointState with CHECKPOINT_CONTEXT
* Align tests with schema update; We cannot add and update a checkpoint in the same session now, ends up with hibernate complaining: two different objects with same identifier
* Fix indentation and format
* Ignore tests that assert DBFlowResult or DBFlowException
* Set DBFlowCheckpoint.blob to null whenever the flow errors or hospitalizes; this way we save an extra SELECT in such cases;
* Fix test; cleared Hibernate session, it would fail at checkpoint with 'org.hibernate.NonUniqueObjectException'
* Changing VARCHAR to NVARCHAR
* Rename v17 liquibase scripts to v19 to resolve collision with ENT v17 scripts
* CORDA-3750: Use hand-written sandbox Crypto object that delegates to the node.
* CORDA-3750: Add integration test for deterministic CashIssueAndPayment flow.
* Tidy up generics for Array instances.
* Upgrade to DJVM 1.1-RC04.
When a flow is missing its database transaction the _real_ stacktrace
of the exception is missing in the logs. This is due to the normal error
handling path way does not work due the transaction being missing. When
it goes to process the next error event (due to the original transaction
context missing error) it will fail for the same error as it needs the
context to be able to process the error event.
The extra logging should help diagnose future errors.
Removing the ability to initialise schema from the node config, and add a new sub-command to initialise the schema (that does not do anything else and exits afterwards).
Also adding a command line flag that allow app schema to be maintained by hibernate for legacy cordapps, tests or rapid development.
Patching up mock net and driver test frameworks so they create the required schemas for tests to work, defaulting schema migration and hibernate schema management to true to match pre-existing behaviour.
Modified network bootstrapper to run an initial schema set-up so it can register nodes.
* Fix erroneous sql statement for oracle; It was failing tests with 'ORA-00933: SQL command not properly ended'
* Fixed flaky test; it didn't wait for counter party flow to get hospitalized as the test implied
Added command-line option: `--pause-all-flows` to the Node to control this.
This mode causes all checkpoints to be set to status PAUSED when the
state machine starts up (in StartMode.Safe mode).
Changed the state machine so that PAUSED checkpoints are loaded into
memory (the checkpoint is deserialised but the flow state is left serialised)
but not started.
Messages from peers are queued whilst the flow is paused and processed
once the flow is resumed.
When a non-database exception is thrown out of a `withEntityManager`
block, always check if the session needs to be rolled back.
This means if a database error is caught and a new non-database error is
thrown out of the `withEntityManager` block, the transaction is still
rolled back. The flow can then continue progressing as normal.
* CORDA-3715: When loading cordapps now check that contract classes have class version between 49 and 52
* CORDA-3715: Now check class version when contract verification takes place.
* CORDA-3715: Making detekt happy with number of levels in func
* CORDA-3715: Make use of new ClassGraph release which provides class file major version number.
* CORDA-3715: Changed package name in test jars
* CORDA-3715: Use ClassGraph when loading attachments.
* CORDA-3715: Reverted file to 4.5 version
* CORDA-3715: Updating method to match non deterministic version.
* CORDA-3715: Added in default param.
* CORDA-3715: Adjusted min JDK version to 1.1
* CORDA-3715: Switching check to JDK 1.2
* CORDA-3715: Now version check SerializationWhitelist classes.
* CORDA-3715: Switched default to null for range.
* [EG-438] First commit of error code interface
* [EG-438] Implement error reporter and a few error codes
* [EG-438] Add unit tests and default properties files
* [EG-438] Add the error table builder
* [EG-438] Update initial properties files
* [EG-438] Add some Irish tests and the build.gradle
* [EG-438] Fall back for aliases and use different resource strategy
* [EG-438] Define the URL using a project-specific context
* [EG-438] Tidy up initialization code
* [EG-438] Add testing to generator and tidy up
* [EG-438] Remove direct dependency on core and add own logging config
* [EG-438] Fix compiler warnings and tidy up logging
* [EG-438] Fix detekt warnings
* [EG-438] Improve error messages
* [EG-438] Address first set of review comments
* [EG-438] Use enums and a builder for the reporter
* [EG-438] Address first set of review comments
* [EG-438] Use enums and a builder for the reporter
* [EG-438] Add kdocs for error resource static methods
* [EG-440] Add error code for duplicate CorDapp loading
* [EG-438] Handle enums defined with underscores
* [EG-440] Add errors for some CorDapp loading scenarios
* [EG-440] Finish adding errors for CorDapp loading
* [EG-440] Fix up errors in properties files
* [EG-440] Start change to error code definition
* [EG-440] Update error code definition and add resource generation tool
* [EG-440] Tidy up error resource generation tool frontend
* [EG-440] Small refactorings and add kdocs
* [EG-440] Generate all missing resources
* [EG-440] Some refactoring and start writing a test
* [EG-440] Update unit test for resource generator
* [EG-440] Renaming of various parts of the error tool
* [EG-440] Add testing for errors and fix an issue in resource generation
* [EG-440] Add a kdoc for context provider API
* [EG-440] Remove old code from repository
* [EG-440] Address some review comments
* CORDA-3291 `isKilled` flag and session errors for killed flows
## Summary
Two major improvements have been worked on:
- A new flag named `isKilled` has been added to `FlowLogic` to allow
developers to break out of loops without suspension points.
- Killed flows now send session errors to their counter parties allowing
their flows to also terminate without further coordination.
Achieving these changes required a __fundamental__ change to how flows are
killed as well as how they sleep.
## `isKilled` flag
The addition of `FlowLogic.isKilled` allows flows to check if the
current flow has been killed. They can then throw an exception to lead
to the flow's termination (following the standard error pathway). They
can also perform some extra logic or not throw an exception if they
really wanted to.
No matter what, once the flag is set, the flow will terminate. Due to
timing, a killed flow might successfully process its next suspension
event, but it will then process a killed transition and terminate.
## Send session errors when killing a flow
A flow will now send session errors to all of its counter parties. They
are transferred as `UnexpectedFlowEndException`s. This allows initiated
flows to handle these errors as they see fit, although they should
probably just terminate.
## How flows are killed
### Before
Originally we were relying on Quasar to interrupt a flow's fiber, we
could then handle the resulting `InterruptedException`. The problem with
this solution is that it only worked when a flow was already suspended
or when a flow moved into suspension. Flows stuck in loops did not work.
### After
We now *do not* use Quasar to interrupt a flow's fiber. Instead, we
switch `FlowStateMachine.isKilled` to true and schedule a new event.
Any event that is processed after switching this flag will now cause a
`KilledFlowTransition`. This transition follows similar logic to how
error propagation works. Note, the extra event allows a suspended flow
to be killed without waiting for the event that it was _really_ waiting
for.
This allows a lot of the tidy up code in `StateMachineManager.killFlow`
to be removed as tidy up is executed as part of removing a flow.
Deleting a flow's checkpoint and releasing related soft locks is still
handled manually in case of infinite loops but also triggered as part
of the actions executed in a transition.
This required flow sleeping to be changed as we no longer rely on
quasar.
## How flows now sleep
The reliance on Quasar to make a flow sleep has been removed.
Instead, when a flow sleeps we create a `ScheduledFuture` that is
delayed for the requested sleep duration. When the future executes it
schedules a `WakeUpFromSleep` event that wakes up the flow... Duh.
`FlowSleepScheduler` handles the future logic. It also uses the same
scheduled thread pool that timed flows uses.
A future field was added to `StateMachineState`. This removes the
need for concurrency control around flow sleeps as the code path does
not need to touch any concurrent data structures.
To achieve this:
- `StateMachineState.future` added as a `var`
- When the `ScheduledFuture` is created to wake up the flow the passed
in `StateMachineState` has its `future` value changed
- When resumed `future` and `isWaitingForFuture` are set to `null` and
`false` respectively
- When cancelling a sleeping flow, the `future` is cancelled and nulled
out. `isWaitingForFuture` is not changed since the flow is ending anyway
so really the value of the field is not important.
* [EG-438] First commit of error code interface
* [EG-438] Implement error reporter and a few error codes
* [EG-438] Add unit tests and default properties files
* [EG-438] Add the error table builder
* [EG-438] Update initial properties files
* [EG-438] Add some Irish tests and the build.gradle
* [EG-438] Fall back for aliases and use different resource strategy
* [EG-438] Define the URL using a project-specific context
* [EG-438] Tidy up initialization code
* [EG-438] Add testing to generator and tidy up
* [EG-438] Remove direct dependency on core and add own logging config
* [EG-438] Fix compiler warnings and tidy up logging
* [EG-438] Fix detekt warnings
* [EG-438] Improve error messages
* [EG-438] Address first set of review comments
* [EG-438] Use enums and a builder for the reporter
* [EG-438] Add kdocs for error resource static methods
* [EG-438] Handle enums defined with underscores
* [EG-438] Slight refactoring of startup code
* [EG-438] Port changes to error reporting code from future branch
* [EG-438] Also port test changes
* [EG-438] Suppress a deliberately unused parameter
* CORDA-3722 withEntityManager can rollback its session
## Summary
Improve the handling of database transactions when using
`withEntityManager` inside a flow.
Extra changes have been included to improve the safety and
correctness of Corda around handling database transactions.
This focuses on allowing flows to catch errors that occur inside an
entity manager and handle them accordingly.
Errors can be caught in two places:
- Inside `withEntityManager`
- Outside `withEntityManager`
Further changes have been included to ensure that transactions are
rolled back correctly.
## Catching errors inside `withEntityManager`
Errors caught inside `withEntityManager` require the flow to manually
`flush` the current session (the entity manager's individual session).
By manually flushing the session, a `try-catch` block can be placed
around the `flush` call, allowing possible exceptions to be caught.
Once an error is thrown from a call to `flush`, it is no longer possible
to use the same entity manager to trigger any database operations. The
only possible option is to rollback the changes from that session.
The flow can continue executing updates within the same session but they
will never be committed. What happens in this situation should be handled
by the flow. Explicitly restricting the scenario requires a lot of effort
and code. Instead, we should rely on the developer to control complex
workflows.
To continue updating the database after an error like this occurs, a new
`withEntityManager` block should be used (after catching the previous
error).
## Catching errors outside `withEntityManager`
Exceptions can be caught around `withEntityManager` blocks. This allows
errors to be handled in the same way as stated above, except the need to
manually `flush` the session is removed. `withEntityManager` will
automatically `flush` a session if it has not been marked for rollback
due to an earlier error.
A `try-catch` can then be placed around the whole of the
`withEntityManager` block, allowing the error to be caught while not
committing any changes to the underlying database transaction.
## Savepoints / Transactionality
To make `withEntityManager` blocks work like mini database transactions,
save points have been utilised. A new savepoint is created when opening
a `withEntityManager` block (along with a new session). It is then used
as a reference point to rollback to if the session errors and needs to
roll back. The savepoint is then released (independently from
completing successfully or failing).
Using save points means, that either all the statements inside the
entity manager are executed, or none of them are.
## Some implementation details
- A new session is created every time an entity manager is requested,
but this does not replace the flow's main underlying database session.
- `CordaPersistence.transaction` can now determine whether it needs
to execute its extra error handling code. This is needed to allow errors
escape `withEntityManager` blocks while allowing some of our exception
handling around subscribers (in `NodeVaultService`) to continue to work.
On node start, load CordaServices before starting the NotaryService,
so that the NotaryService can check that the services it requires are
available when starting.
Resolves#6172.
* CORDA-3762: Integration test exposing the problem reported
* CORDA-3726: Additional logging
* CORDA-3726: Prevent thread leaks
* CORDA-3726: New `journalBufferTimeout` parameter
* CORDA-3726: Override `journalBufferTimeout` parameter
* CORDA-3726: Making Detekt happier
* CORDA-3276: Account for extra thread user in MockNetwork
For real node this does not matter as `shutdown` can safely be called multiple times, which is not true for server thread provided by MockNetwork
* CORDA-3276: Do not make SMM shutdown "executor" as it belongs to AbstractNode
* CORDA-3276: Address input from @rick-r3
* CORDA-3276: Fix test after rebase
* adding blocked functions ro RestrictedEntityManager and creating RestrictedConnection class
* adding flow tests and fixing issues regarding the review
* adding quasar util to gradle
* updating flow tests
* adding space before } at .isThrownBy()
* adding spaces
* [EG-503] Spent state audit tool
Fixes
* Refinements to notary query interfaces. Feature complete.
* EG-503: Introduce optional `notaryService` in `ServiceHubCoreInternal`
* Remove redundant logic following change to use extensions API
Co-authored-by: Viktor Kolomeyko <viktor.kolomeyko@r3.com>
* CORDA-3696: Temporary update to enable JDK11 build and test. Will eventually be switchable.
* CORDA-3696: Filter out the Nashorn warning.
* CORDA-3696: Add JDK11 classifier.
* CORDA-3696: Updated match string to cope with JDK11.
* CORDA-3696: Filtering out SPHINCS256_SHA256 where failing due to JDK11.
* CORDA-3696: Now remove SPHINCS256_SHA256 only if JDK11.
* CORDA-3696: Fix test failure - switch to regex matching.
* CORDA-3696: Hide the illegal access warnings.
* CORDA-3696: Check for Java11 when disabling Java11 warnings.
* CORDA-3696: Fix unneccessary non null check.
* CORDA-3696: Reverting build env to JDK8
* CORDA-3696: Revert hiding of illegal access warnings via Unsafe class.
* CORDA-3696: Remove internal access warnings and new JDK11 version checker.
* CORDA-3696: Updated build file for OS
* CORDA-3696: Removed typo
* CORDA-3696: Fixed space typo.
* CORDA-3696: Open modules to remove the illegal access warnings.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
* CORDA-3691 Delete checkpoint when flow finishes
The checkpoint and its related records in joined tables should be deleted
when a flow finishes.
Keeping these flows around will be completed in the future.
* CORDA-3691 Ignore some flow metadata tests
Ignore tests around recording the finish time of flow metadata records
since we are not currently keeping COMPLETED flows in the database.
Flows that are kept for overnight observation:
- Save their Checkpoint.status as 'HOSPITALIZED' in the database
- Save the error that caused the hospitalization in the database
A new Event was added for this reason. Whenever the hospital determines
a flow for hospitalization, it adds this Event in the flow's fiber queue.
When processed it creates a new DB transaction, stores the checkpoint status along with
the error, and it adds a 'FlowContinuation.ProcessEvents' continuation so that the fiber keeps
processing events (effectively since there are no more events in the fiber's channel, the fiber will suspend).
Flows that error:
- Their checkpoints are kept in the database
- Save their Checkpoint.status as 'FAILED'
- Save the error that caused the error in the database
Upon erroring, the flow's Checkpoint.status gets updated('FAILED') and the checkpoint is stored
in the database instead of getting removed. The flow then propagates the error to counterparties,
sets its future with the error and gets removed from memory.
* ENT-4967: Require no classifier for corda-node-djvm, corda-deserializers-djvm.
* Also remove classifiers from core, serialization and finance-contracts.
* Compile corda-serialization-djvm for Java 8 and remove its classifier.
Added a new field Completed to the in-memory object FlowState.
FlowState.Completed is corresponds to flow_state=Null in the DB.
This change will save disk space.
* Run serialisation tests with both in-process and out-of-process nodes.
* Add custom serialisers and whitelists to Driver's AMQPServerSerializationScheme.
* Run serialisation tests with both in-process and out-of-process nodes.
* Add custom serialisers and whitelists to Driver's AMQPServerSerializationScheme.
* CORDA-3601 Record a flow's finish time
Record a flow's finish time by updating its metadata record. It is set
in `updateCheckpoint` by checking the status of the checkpoint. If it is
`COMPLETED` it will set the `finishInstant` on the metadata object and
update it.
* CORDA-3601 Record flow finish time for all finished statuses
Update the flow finish time for the following statuses:
- COMPLETED
- KILLED
- FAILED
* CORDA-3601 Use platform clock in `DBCheckpointStorage`
* CORDA-3669 Do not execute `ExecuteAsyncOperation` multiple times
When a `FlowExternalOperation` or `FlowExternalAsyncOperation` executes
and completes a flag (`isFlowResumed`) is switched to true.
This flag was used inside of `DoRemainingWorkTransition` to decide
whether to skip over the execution of an event.
Since this flag was being switched to true when the external operation's
future completed, it was possible for _unexpected_ events to be placed
in the fiber's queue that would retrigger the
`FlowIORequest.ExecuteAsyncOperation`, that is held as the checkpoint's
next `FlowIORequest`to process.
By using the existing `StateMachineState.isTransactionTracked` (and
renaming it to `isWaitingForFuture`) we can decide to not process the
`FlowIORequest.ExecuteAsyncOperation` if it has already been called
before. This moves this code path in line with
`FlowIORequest.WaitForLedgerCommit`.
Random `DoRemainingWork` events can now be pushed to the fiber's queue
without causing the `FlowIORequest.ExecuteAsyncOperation` to execute
again.
* CORDA-3596 Record flow metadata
Record flow metadata during the zero'th checkpoint that occurs before
calling the flow's `call` function.
This required adding an RPC call's arguments to the `InvocationContext`
that gets created. These arguments are then accessible within the
statemachine and from the `Checkpoint` class. The arguments are then
extracted when recording a flow's metadata inside of
`DBCheckpointStorage`.
Updated the size of the started by column to 128 since it was not long
enough to hold the fully qualified class of a service that started a
flow.
* CORDA-3596 Remove arguments from in-memory checkpoint
When executing a flows first real suspend (from flow code) the arguments
contained in the `InvocationContext` are removed. This saves holding
these arguments for the whole lifecyle of a flow.
* CORDA-3596 Increase `cordapp_name` column to 128
* CORDA-3596 Join metadata by `flow_id`
Due to changes in where metadata is recorded, there is no need for
having `invocation_id` as the metadata table's primary key. The
`flow_id` is now the primary key of the table and is used to join to the
main checkpoints table.
The `invocation_id` has been removed from the checkpoints table since it
is not needed for the join anymore.
* CORDA-3596 Remove `received_time` from metadata table
* CORDA-3596 Remove unused `StartReason` enum
* CORDA-3596 Simple `DBCheckpointStorageTests` for metadata
* CORDA-3596 Truncate really long flow names
* CheckpointStorage.getAllCheckpoints will not fetch COMPLETED, FAILED and KILLED flows by default
* Rename getAllCheckpoints to getAllRunnableCheckpoints for clarity
* Fix Detekt issue
* Rename getAllRunnableCheckpoints to getRunnableCheckpoints
* Minor kdoc update
* Bring back in CheckpointStorage.getAllCheckpoints to co-exist with getRunnableCheckpoints
* Add progress tracker information to checkpoint
The checkpoint Datebase is updated when the statemachine suspends
with the progress trackers current step name. This is truncated if
it is longer than the Database column.
* Minor rename in statemachine for clarity
* Set/ Reset Checkpoint.status to RUNNABLE after when suspending
* Removing/ Moving comment as it makes no longer sense to be there since, we now always create a new Checkpoint object in SingleThreadedStateMachineManager.createFlowFromCheckpoint through tryDeserializeCheckpoint
* Set -in memory- Checkpoint.status to RUNNABLE when a flow is retrying from Checkpoint
Due to a change in how messaging works, `ActionExecutorImpl
.executeSendInitial` was no longer being called. Changing the byteman
script to throw exception on hits to `ActionExecutorImpl
.executeSendMultiple` allowed the tests to pass.
When a flow is finished do not delete the checkpoint from the DB.
Instead, the FlowStatus is marked as Completed in the DB.
Updated numerous tests which relied on the flow being removed
when finished.
* Update Checkpoint DB to update flow io request
* Modify flow monitor to update Checkpoint DB with waiting flows
This happens periodically.
* Refactored code to avoid looping twice and updated tests
* Fix tests after rebasing
* Fix MR comments (non-functional refactor of tests + FlowMonitor).
* Made visible for testing method private in DBCheckpointStorage
This is not needed anymore.
* Explicity check if ioRequestType has changed in update method
* Fix shadowing warning
* Import non deprecated Assert into test
* Use AssertEquals not assert in test
* Address more comments (minor refactor) of DBCheckpointStorage
* Minor fix use it instead of referencing object explicitly
* Add null check to DBCheckpointStorage
* Revert changes to Flow Monitor.
We will instead store the information in the main thread of the
state machine.
* Remove now uneeded API and make statemachine update ioRequest
* Add Integration Test to check statemachine updates DB on Recieve
* Use simpleName in checkpoint storage instead of class.
Hibernate was previously resetting the class field this is now
set to null (when getting checkpoint form DB) and a new method
for getting back the simple name as a string.
* Update StateMachineState to store simple name.
* Fix after rebase broke stuff + renamed test
* Fix Detekt issue
* Remove uneeded null assertion
* [CORDA-3628] - Implement sendAll API
* detekt
* Some minor refactorings and docs
* Eliminate warnings
* Address Rick's comments
* Switch sendAll to use a set
Do not cascade updates to checkpoint error and result tables to hopefully
improve database performance moving forward. Because the joined tables
are no longer being updated by updating the main `DBFlowCheckpoint` entity,
they must be created/updated/deleted manually.
The checkpoint blobs still cascade as they pretty much always evolve in
tandem with the main checkpoint table.
* CORDA-3651: addManifest now uses separate files for reading and writing.
* CORDA-3651: The jar scanning loader now closes itsself.
Co-authored-by: Adel El-Beik <adelel-beik@19LDN-MAC108.local>
* Split out node-api tests that require test-utils/node-driver
* Add node-api test artefacts to publication list.
* Make test-common a transient dependency - downstream tests assume that it's available.
* Switch dependencies to java-library
* Fix magic package name for cordapp scanning in test
* CORDA-3644: Scan the CorDapp classloader directly for SerializationWhitelist.
* CORDA-3644: Filter CorDapps from out-of-process node classpaths by their manifest attributes. Also exclude directories and blatant test artifacts.
* Fix IRS Demo - its "tests" artifact had a non-standard classifier of "test".
* Remove unused dependencies from test-common
* Explicit imports and formatting
* Add core-test-utils project
* Add dependency
* Move Kryo serialization context to node-api (not serialization as we do not want to pull kryo into the serialization lib)
* Move AMQP server serialization scheme to node api
* Move serialization tests to node-api
* Move internal test helpers without further dependencies.
* Move out some types from RPCClientProxyHandler to node-api in preparation for moving the AMQP scheme
* Move client AMQP context to node-api so we can move the test serialization rule out.
* Move InternalSerializationTestHelpers to core-test-utils
* Moved testing.core to core-test-utils
* Make detekt happy
* Add api-scanner to core-test-utils
* Remove inlined package names introduced by IntelliJ refactoring
* Update api-current.txt to account for reordering.
* Add core-test-utils to list of published artifacts.
* Add missing import
* Location of things in api text has moved again (publish name of artefact?)
* Revert all additions to the API, leaving just the reordering
* Code review: fix up core-test-utils build.gradle and introduce kryo version constant.
* Remove OpenSsl flag from ssl config stub (can't be used from node-api)
* Suppress detekt warning
* Move core test util tests to the right module
* Expose kotlin test as a transient dependency - projects have come to rely on that.
* Fix typo in package name
* Replace old Checkpoint table with new one.
Adds some of the new fields into the table where needed (I have
guessed this stuff but we can update it as we go along).
* Fix database constraints + name table correctly opps.
* Fixed typos in Liquidbase script
Also corrected constraints and added missed fields in hibernate
checkpoint class and liquibase scripts.
* Update CheckpointStorage to pass in serialization context.
This is cleaner than passing both the checkpoint and the
serialized checkpoint into the methods. Also fixed
CordaPersistanceServiceTests which I accidentally broke.
* Fix detekt problem
* Revert "Update CheckpointStorage to pass in serialization context."
This reverts commit b71e78f202.
* Fix test broken by reverting commit
* CORDA-3597 Update metadata join, timestamp columns and serialization
- Change the metadata join to the checkpoints table to use
`invocation_id` instead of `flow_id`. There were issues joining
between the tables because `flow_id` was not the primary key of the
metadata table. Switching over to `invocation_id` has at least allowed
us to bypass this issue. The information about the `invocation_id` is
stored in the `Checkpoint` class which makes it simple to save at
runtime.
- Some of timestamp columns were nullable when they should always be
populated, the nullable flags have now been removed.
- Previously the whole checkpoint was being serialized and stored into
the `checkpoints_blob.checkpoint` column. This meant duplicated saving
as the `flow_state` was contained in this object. Only the
`CheckpointState` property of `Checkpoint` is now being serialized and
saved to this field. Furthermore, it now uses the default
`STORAGE_CONTEXT` serialization (AMQP) instead of Kryo (which is only
used for serializing the `flow_state` / flow stack).
- The checkpoint database performance metrics recording has been
abstracted to its own class.
* CORDA-3597 Make metadata join non optional
Remove the nullable declaration on the metadata field of
`DBFlowCheckpoint`
* CORDA-3597 Rename `node_checkpoints_blobs` to `node_checkpoint_blobs`
* CORDA-3597 Update some kdocs
Co-authored-by: Dan Newton <danknewton@hotmail.com>
* CORDA-3484: Now cope with 2 contract jars with same hash but different name, we just select one and use that.
* ENT-3584: Contract jars are now generated on the fly.
* CORDA-3584: Reverted changes to CordappProviderImpl. Exception is raised if node started with multiple jars with same hash.
* ENT-3584: Fixing test failure.
* CORDA-3584: Switch to test extension method instead of reflection to access internal member.
* ENT-3584: Address review comment. Dont fully qualify exception.
* CORDA-3584: Address review comment and converted lazy to a resettable one.
* CORDA-3584: Removed unused logger.
* CORDA-3584: Fixed visibility.
* CORDA-3584: Removed synchronized
* CORDA-3584: Removed CordappResolver
* CORDA-3584: Reverted change in gradle file and fixed test.
* CORDA-3584: Removed V3 from test description as it wasn't actually V3 specific.
* CORDA-3584: Address review comment. Let classes be garbage collected.
* Throw SQLException or PersistenceException plain, that may come out of an unsafe subscriber
* Add explanatory comment about why we changed Observer.tee to use unsafe subscribe
* Introducing not unsubscribing version of Rx.Subscriber
* Wrap PublishSubjects with FlowSafeSubjects in all tests that test Observer.tee
* Minor code formatting
* Make rawUpdates Rx.Observers not unsubscribe when accessed from CordaServices - Do not allow rawUpdates subscribing from flows
* Warning fix: Add else block to when statement
* Revert "Wrap PublishSubjects with FlowSafeSubjects in all tests that test Observer.tee"
This reverts commit e419af86
* Correcting log message
* Improve log message
* Add fiber's id to log message and exception message
* Added test, asserting FlowSafeSubscriber is alive and re-accessed upon flow retry
* Logging flow name instead of flow id at VaultService.rawUpdates subscribing error
* Add kdoc to OnNextFailedException
* Minor text correction
* Update kdocs of FlowSafeSubject/ PreventSubscriptionsSubject
* Moved FlowSafeSubject under package node.internal as it is only used by NodeVaultService
* Add comment and update kdoc explaining how to subscribe with SafeSubscriber to FlowSafeSubject
* Change PreventSubscriptionsSubject#errorAction to be more specific; to return an Exception
* Minor text update
* Update messy comment
* Replace assertThat with assertEquals
* Splitting heartBeat to heartBeat1 and hearBeat2 for more clear asserting
* Correcting comment
* Update messy comment
* Splitting heartBeat into heartBeatOnNext and heartBeatOnError
* Update test name
* Add explanatory comment to test
* Update test name
* Update test and add test comment
* Moving NotarisedTxs from SendStateFlow to VaultObserverExceptionTest inside NodeHandle.getNotarisedTransactionIds
* Moving SubscribingRawUpdatesFlow from ErrorHandling to VaultObserverExceptionTest
* Update kdoc of FlowSafeSubscriber and FlowSafeSubscriber.onNext
* Make kdoc more clear
* Throw exception upon accessing VaultService.rawUpdates from within a flow
* Changing exception thrown when accessing VaultService.rawUpdates from within a flow to a CordaRuntimeException
* Minor kdoc update
* Update test comment
* Update kdoc of FlowSafeSubscriber
* Introducing Observable.flowSafeSubscribe public API method to subscribe with -non unsubscribing- Rx.Subscribers to Observables. It also replaced FlowSafeSubject
* Move CustomSafeSubscriber outside test methods
* Minor text update
* Add timeout to tests
* Update kdoc of flowSafeSubscribe
* Update kdoc of flowSafeSubscribe
* Update kdoc of flowSafeSubscribe
* Move FlowSafeSubscriber and flowSafeSubscribe under their own package
* Fix detekt issue
* Update Detekt baseline
* Revert "Update Detekt baseline"
This reverts commit 793a8ed9
* Fix Detekt issue
* Moved strictMode flag from flowSafeSubscribe to OnFlowSafeSubscribe
Moved OnFlowSafeSubscribe into internal package
Integration tested flowSafeLooseSubscribe
* Suppress Rx Deprecation
* Rename flowSafeSubscribe to flowSafeObservable
* Renaming flowSafeObservable to continueOnError and FlowSafeSubscriber to ResilientSubscriber
* Split StateMachine State into 2 classes
The idea is this better reflects the database structure. Added a
few helper methods to copy and update state.
* Doc + Improve Checkpoint API
* Rename methods to be more clear
* [NOTICK] Add a custom detekt rule for tests with no timeout, and fix remaining missing timeouts
* [NOTICK] Add a test for custom detekt rules and tidying
* add timeout annotation to new test
Co-authored-by: Stefano Franz <roastario@gmail.com>
* [EG-140] Allow system property paths with multiple keys to be specified in node.conf
* [EG-140] Split property paths to remove quotes
* [EG-140] Quote system properties in docs
* [EG-140] Rename path to key
* TM-197 Setting bouncy castle provider in order for the test to pass
* TM-197 setting timeout for all builds at 3 hours
* TM-197 ignoring unstable tests
* TM-197 switching 4.3 to use local k8s instances and also make the maximum duration of builds 3 hours, fix 1 test and ignore 2 flaky ones
* update to use local-k8s version of the plugin
Co-authored-by: Stefano Franz <roastario@gmail.com>
* CORDA-3565: `ServiceStateSupport` and supporting classes
* CORDA-3565:Plug `ServiceLifecycleSupport` into `MessagingService`
* CORDA-3565: Detekt baseline update
* CORDA-3565: React to MessagingServer going up and addition logging for up/down
Co-authored-by: Matthew Nesbit <matthew.nesbit@r3.com>
* Make tee not wrap PublishSubjects in SafeSubscribers, otherwise a non Rx exception from an unsafe observer shuts down all other observers under the same PublishSubject
* Throw SQLException or PersistenceException plain, that may come out of an unsafe subscriber
* Revert "Throw SQLException or PersistenceException plain, that may come out of an unsafe subscriber"
This reverts commit c7b8af3fa6.
* Update Detekt baseline
* Just passing in the exception was printing the entire stacktrace to the log, now we just pring the exception and message
* Updating exception message
