This was achieved by having the hash in the node-info file to be just of the node's X.500 name. This also solves existing duplicate node-info file issues that we've been having.
Also updated the docsite.
* Jolokia agents are loaded dynamically if configured
* Renamed exportJmxTo (never used) to jmxMonitoringHttpPort and take it from config
* Updated documentation and tests
* ENT-1403 Cache node attachments (and attachment content)
* ENT-1403 Make cache sizes configurable
* Update documentation with new config parameters
* Test that non-existence of attachments is not cached
* Remove unneeded defaults in interface
* It turned out we need the defaults on the interface in quite a few tests
* Codereview: typos, size in MB rather than bytes, charset in tests, move concurrencyLevel to a constant
* Codereview: Make the internal config value bytes again, but config file in MB
* Fix example config unit test
* Able to send hand coded messages to an Artemis node inbox
Get startup race condition fixed. Start cleanup work.
Fixup after rebase
Remove SASL hack for now
Minor tweaks. Enable AMQP mode manually.
Add configuration control
Slight clean up
Stop timeouts that don't work with AMQP
Rename class
Get TLS constants from :node-api
Primitive integration test
Put back commented line
Session per bridge to alow rollback on remote rejects.
Add more tests and handle multiple IP adddresses
Reduce logging
Fixup after rebase
Add a test to verify the remote end AMQP rejection logic works and does cause message replay.
Allow Artemis to duplicate after session rollback
Reduce number of threads
Move legacy bridge related code over to CoreBridgeManager
Shared threadpool for bridges
Add a test to confirm that no side effects when using a shared thread pool.
Address PR comments and remove dead lines
Rebase and add some comments
Remove a couple of blank lines
Ensure AMQP bridges are used in tests
Fixup after removal of testNodeConfiguration
Add a couple of doc comments
Add a couple of doc comments
Make things internal and use CordaFuture
Address some PR comments
Change comment type
* Use Artemis 2.2 to fix AMQP problems. Add explicit test of legacy core bridges, as marking the factory class private had silently broken them.
* Fix change due to using Artemis 2.2
* Extend unit test on RPCSecurityManager
* Fix corner cases in permission parsing and bug in tryAuthenticate
* Rework docsite page
* Add missing ChangeLog entry
* JMX Jolokia instrumentation WIP (driverDSL, webserver, cordformation, hibernate statistics, access policy config file hardening)
* Cordformation changes to support jolokia agent instrumentation at JVM startup.
* Minor updates to reflect usage of Jolokia 1.3.7 (which uses slightly different .war naming)
* Use relative path reference in -javaagent to prevent problem with long path names with spaces.
* Fixed incorrect regex pattern and added assertion to test.
* Enable JMX monitoring.
* Reporting of Hibernate JMX statistics is configurable (by default, only switched on in devMode)
* Make Artemis JMX enablement configurable.
* Re-instate banning of java serialization.
* Improve JUnit.
* Fixes following rebase from master.
* Re-instated correct regex for picking up Jolokia agent jar.
* Fixed broken integration test.
* Updated documentation
* Updated following PR review feedback.
* Fixed compilation error caused by change in DriverDSL argument type.
* Fixed compilation error caused by change in DriverDSL argument type.
* Fail fast if jolokia-agent-jvm.jar is not located.
* Applied changes in cordformation following review feedback from CA.
Main differences preserved in Enterprise version:
* constants.properties: platform version 1 (OS has 2)
* gradle-wrapper.properties: higher Gradle version gradle-4.3.1 (OS has gradle-4.3)
* Driver.kt - setting system property "user.dir"
* Coin selection for SQL Server/Azure
* Transaction isolation level change for updateInfoDB in PersistentNetworkMapCache from "repeatableRead" to "readCommitted"
* Configuration option to prefix all Hibernate generated SQL with a schema name via a configuration property `database.schema`
* Fix negative value in SELECT TOP query (fix for Oracle db)
* Network map cache using Network map client instead of artemis. -- WIP
* fix up after rebase
* address PR issues, split network map update test, added todos to remove sleeps
* move jimfs and baseDir to field variable
network-parameters file read in by the node at startup, of which only the list of notaries is used. For now, the driver and MockNetwork have been updated to require notaries to be started first. This is so that the same set of network parameters can be defined for all the nodes.
CN in the legal name is not longer disallowed since it's no longer reserved for distributed notary names.
Single-node notaries now only have one identity, their main identity. Nodes part of a cluster continue to have two.
(Based off Kasia's work)
* Check array size before accessing
* Review fixes
* CORDA-540: Make Verifier work in AMQP mode (#1870)
* reference to finance module via not hardcoded group ID (#1515)
* generic way to reference to group id when loading finance.jar via cordapp
* Fixed the node shell to work with the DataFeed class
* Attempt to make NodeStatePersistenceTests more stable (#1895)
By ensuring that the nodes are properly started and aware of each other before firing any flows through them.
Also minor refactoring.
* Disable unstable test on Windows (#1899)
* CORDA-530 Don't soft-lock non-fungible states (#1794)
* Don't run unlock query if nothing was locked
* Constructors should not have side-effects
* [CORDA-442] let Driver run without network map (#1890)
* [CORDA-442] let Driver run without network map
- Nodes started by driver run without a networkMapNode.
- Driver does not take a networkMapStartStrategy anymore
- a new parameter in the configuration "noNetworkMapServiceMode" allows for a node not to be a networkMapNode nor to connect to one.
- Driver now waits for each node to write its own NodeInfo file to disk and then copies it into each other node.
- When driver starts a node N, it waits for every node to be have N nodes in their network map.
Note: the code to copy around the NodeInfo files was already in DemoBench, the NodeInfoFilesCopier class was just moved from DemoBench into core (I'm very open to core not being the best place, please advise)
* Added missing cordappPackage dependencies. (#1894)
* Eliminate circular dependency of NodeSchedulerService on ServiceHub. (#1891)
* Update customSchemas documentation. (#1902)
* [CORDA-694] Commands visibility for Oracles (without sacrificing privacy) (#1835)
new checkCommandVisibility feature for Oracles
* CORDA-599 PersistentNetworkMapCache no longer circularly depends on SH (#1652)
* CORDA-725 - Change AMQP identifier to officially assigned value
This does change our header format so pre-cached test files need
regenerating
* CORDA-725 - update changelog
* CORDA-680 Update cordapp packages documentation (#1901)
* Introduce MockNetworkParameters
* Cordformation in Kotlin (#1873)
Cordformation rewritten in kotlin.
* Kotlin migration
* Review Comments
* CORDA-704: Implement `@DoNotImplement` annotation (#1903)
* Enhance the API Scanner plugin to monitor class annotations.
* Implement @DoNotImplement annotation, and apply it.
* Update API definition.
* Update API change detection to handle @DoNotImplement.
* Document the `@DoNotImplement` annotation.
* Experimental support for PostgreSQL (#1525)
* Cash selection refactoring such that 3d party DB providers are only required to implement Coin Selection SQL logic.
* Re-added debug logging statement.
* Updated to include PR review feedback from VK
* Refactoring following rebase from master.
* Fix broken JUnits following rebase.
* Use JDBC ResultSet getBlob() and added custom serializer to address concern raised by tomtau in PR.
* Fix failing JUnits.
* Experimental support for PostgreSQL: CashSelection done using window functions
* Moved postgresql version information into corda/build.gradle
* Using a PreparedStatement in CashSelectionPostgreSQLImpl
* Changed the PostgreSQL Cash Selection implementation to use the new refactored AbstractCashSelection
* * Retire MockServiceHubInternal (#1909)
* Introduce rigorousMock
* Add test-utils and node-driver to generated documentation
* Fix-up: Bank Of Corda sample (#1912)
In the previous version when running with `--role ISSUER` the application failed to start.
The reason was that in spite of `quantity` and `currency` were optional,
un-necessary `requestParams` been constructed regardless.
* move SMM
* Interface changes for multi-threading
* CORDA-351: added dependency check plugin to gradle build script (#1911)
* CORDA-351: added dependency check plugin to gradle build script
* CORDA-351: Added suppression stub file with example
* CORDA-351: added suppresionFile property
* CORDA-435 - Ensure Kryo only tests use Kryo serializatin context
Also correct lambda typos (from lamba)
* Network map service REST API wrapper (#1907)
* Network map client - WIP
* Java doc and doc for doc site
* remove javax.ws dependency
* NetworkParameter -> NetworkParameters
* move network map client to node
* Fix jetty test dependencies
* NetworkParameter -> NetworkParameters
* Address PR issues
* Address PR issues and unit test fix
* Address PR issues
* Fixing Bank-Of-Corda Demo in `master` (#1922)
* Fix-up: Bank Of Corda sample
Use correct CorDapp packages to scan
(cherry picked from commit 2caa134)
* Set adequate permissions for the nodes such that NodeExplorer can connect
(cherry picked from commit ae88242)
* Set adequate permissions for the nodes such that NodeExplorer can connect
(cherry picked from commit ae88242)
* Correct run configuration
* Fix-up port numbers
* CORDA-435 - AMQP serialisation cannot work with private vals
They won't be reported as properties by the introspector and thus we
will fail to find a constructor for them. This makes sense as we will be
unable to serialise an object whose members we cannot read
* CORDA-435 - AMQP enablement fixes
AMQP has different serialization rules than Kryo surrounding the way we
introspect objects to work out how to construct them
* [CORDA-442] make MockNetwork not start a networkmap node (#1908)
* [CORDA-442] make MockNetwork not start a networkmap node
Now MockNetwork will put the appropriate NodeInfos inside each running node networkMapCache.
Tests relating to networkmap node starting and interaction have been removed since they where relaying on MockNetwork
* Minor fix for api checker script to support macOS
* Retrofit changes from Enterprise PR #61 (#1934)
* Introduce MockNodeParameters/Args (#1923)
* CORDA-736 Add some new features to corda.jar via node.conf for testing (#1926)
* CORDA-699 Add injection or modification of memory network messages (#1920)
* Updated API stability changeset to reflect new schema attribute name.
* Fixed AbstractNode to load custom notary services properly.
Added a custom notary sample.
* Prevent multiple custom notaries from being loaded
* Throw if more than once custom notary service is loaded
