We add an implicit .0 to the end of l4t versions which do not fulfill
semver, which allows us to always match using comparison operators, such
as < and <=.
Change-type: minor
Signed-off-by: Cameron Diver <cameron@balena.io>
ConfigJson users now don't need to worry about initialization.
It's done lazily on the first public method call.
Implementation is also rewritten to follow async/await pattern.
Change-type: patch
Signed-off-by: Roman Mazur <roman@balena.io>
A compose file can now contain a volume which uses a different driver
from the default one; local.
Change-type: patch
Signed-off-by: Rich Bayliss <rich@balena.io>
If we had it eearlier, it would have prevented #1148.
When init is called, withImagesFromDockerAndDB in images.ts is called as well.
Change-type: patch
Signed-off-by: Roman Mazur <roman@balena.io>
Custom type definitions are removed for mixpanel module since they are embedded
into their npm package.
Change-type: patch
Signed-off-by: Roman Mazur <roman@balena.io>
These contracts can specify an OS version and supervisor version that
they require. If any of the containers in a release have requirements
that are not met, the release is rejected, and the previous release
continues to run.
Change-type: minor
Closes: #1086
Signed-off-by: Cameron Diver <cameron@balena.io>
Various fields returned from the docker daemon don't retain order (for
example the volumes field). We now only select certain array values to
compare taking order into account.
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
With recent changes to local mode behavior, supervisor removes all engine objects
that were not present before entering local mode.
With this change, supervisor also detects its own resources and does not delete them
if it was updated during local mode operations.
Change-type: patch
Signed-off-by: Roman Mazur <roman@balena.io>
That way that this is performed is by first adding a depends_on entry
for the target service if it appears in a network mode. Then when we
generate the docker container for this service, we use the containerId
of the target container and replace the network_mode with
`container:<id>`.
When comparing state, we check that the containerId still points to the
contianerId of the target container, and in this way we ensure that
when a network mode target container changes, we change the dependent
container too.
Change-type: minor
Closes: #851
Signed-off-by: Cameron Diver <cameron@balena.io>
This change makes DeviceState to wait until local mode switch is definitely
completed before actually applying the state, which avoids races in state cleanup.
Change-type: patch
Signed-off-by: Roman Mazur <roman@balena.io>
In local mode, we now update device status on the backend,
but omit applications info in our updates.
Closes: #959
Change-type: minor
Signed-off-by: Roman Mazur <roman@balena.io>
Changes in the node engine related to streams would cause the gzip
streams flush function to be called at the wrong times. The sinon fake
timers were also interacting with this.
We use setImmediate to call the flush function, and remove sinon timers
for the logging tests.
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
When assigning multiple host ports to a single container port before
this change, the supervisor would incorrectly take only the first host
port into consideration. This change makes it so that every host port
per container port is considered.
Closes: #986
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
We add a database table, which holds information about the last
timestamp of a log successfully reported to a backend (local or remote).
We then use this value to calculate from which point in time to start
reporting logs from the container. If this is the first time we've seen
a container, we get all logs, and for every log reported we save the
timestamp. If it is not the first time we've seen a container, we
request all logs since the last reported time, ensuring no interruption
of service.
Change-type: minor
Closes: #937
Signed-off-by: Cameron Diver <cameron@balena.io>
This commit does two related things:
* We make the poll interval a random time between 0.5 and 1.5 times the configured interval.
* We introduce the BALENA_SUPERVISOR_INSTANT_UPDATE_TRIGGER configuration variable, that defaults to true. If this variable is set
to false, then calls to /v1/update are ignored, and on startup the supervisor waits for a poll interval before getting the target state.
This will help especially on cases where there's a large number of devices on a single network. By disabling instant updates and setting a large
poll interval, we can now achieve a sitation where not all devices apply an update at the same time, which can help avoid
overwhelming the network.
Change-type: minor
Signed-off-by: Pablo Carranza Velez <pablo@balena.io>
Before this change, service name resolution would only occur in the
default network. This was because we were not explicitly adding aliases
of the service names to the aliases fields.
We also fix the comparison, which would do funny things based on
container IDs, which was correct but unnecessary.
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
We run the risk of the state engine exiting early when a dependency is
not ready, especially in local mode. This changes forces a noop to be
returned when we are waiting on another service, which is the process
used elsewhere in the state engine.
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
We were not allowing newlines previously by virtue of the regex not
allowing them. The docker daemon and supervisor handling code both
support them, so we allow them in the parsing code too.
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
Adjacent ports are always grouped together by docker when reporting the
container state (from an inspect), so adjacent ports defined in the
compose file would not match as they would not have been normalized.
We make sure to always normalize the input port configuration, so that
it will match the docker output (if it should).
We also don't sort in the fromComposePorts function anymore as that is
handled by the normalize function.
Closes: #897
Change-type: patch
Signed-off-by: Cameron Diver <cameron@balena.io>
We define the type for each config value, and validate the data when
retrieving and setting it.
Change-type: minor
Signed-off-by: Cameron Diver <cameron@balena.io>
We've seen at least one case where the 10ms delay
wasn't enough, causing the tests to fail where they shouldn't.
(Ideally we should find a better way to detect when the streams
have finished propagating, but this will avoid failures in the meantime).
Change-type: patch
Signed-off-by: Pablo Carranza Velez <pablo@balena.io>
This avoids issues on provisioning where the current state
(esp. config.txt) that we want to save is retrieved without
a RESIN_ or BALENA_ prefix, causing those values to be lost.
Change-type: patch
Signed-off-by: Pablo Carranza Velez <pablo@balena.io>
They will take precedence over any existing RESIN_ variables. We strip both namespaces now
whenever we get the target values.
This also fixes preloading with a legacy config (the interface to get the config keys from
the legacy apps.json was broken).
Change-type: minor
Signed-off-by: Pablo Carranza Velez <pablo@balena.io>
But we keep backwards compatibility by normalizing existing io.resin labels
into io.balena ones, and adding both RESIN_ and BALENA_ env vars for these features.
Change-Type: minor
Signed-off-by: Pablo Carranza Velez <pablo@balena.io>
We change the lockfile to /tmp/balena/updates.lock, and the resin-kill-me file to /tmp/balena/handover-complete.
In the host, we change to use /tmp/balena-supervisor instead of /tmp/resin-supervisor.
We add BALENA_ env vars in addition to the RESIN_ env vars.
We keep backwards compatibility by using both paths for the lockfile and handover, and keeping the RESIN_ env vars.
Changelog-entry: Move the handover and lock files to /tmp/balena, rename them, and add BALENA_ env vars
Change-type: minor
Signed-off-by: Pablo Carranza Velez <pablo@resin.io>
This enables the switch to be added to the compose, and the handling of
docker messages has been changed to ensure that the multiplexed logs
which result are handled properly.
Change-type: minor
Signed-off-by: Cameron Diver <cameron@resin.io>
Stability improvements;
* Printing of unsupported compose fields
* Added a lot of tests
* All compose configuration has a default value, enabling better
comparison
Change-type: minor
Signed-off-by: Cameron Diver <cameron@resin.io>
Also change logsChannelSecret value to be queried with the api backend,
so that logs are not shared between instances. This has been implemented
as the first config function provider with mutability.
Change-type: minor
Closes: #675
Signed-off-by: Cameron Diver <cameron@resin.io>
Before this change, port ranges were iterated and stored as an object
per port mapping. Now the port ranges are stored as ranges until they
need to be converted to objects. The need to convert to objects still
exists as this is the format which the docker remote API expects, but
hopefully this should alleviate bugs like #644 by making the memory more
shorter-lived.
Also added more tests.
Change-type: patch
Closes: #644
Signed-of-by: Cameron Diver <cameron@resin.io>
This commit abstracts all of the boot config code out of the
device-config module, ready to extend with different config backends.
Change-type: patch
Signed-off-by: Cameron Diver <cameron@resin.io>
Resin’s delta server supports Balena deltas as version 3 deltas. This commit adds support for triggering delta generation for Balena deltas, and applying them locally to the device via a simple pull.
The delta version to use when updating has been abstracted away as an env var that is user-defined. The default value is still instructing use of rsync deltas (v2).
Change-Type: minor
The supervisor will now check that a source of an application matches
the current source, and only start it if so.
Change-type: patch
Closes: #658
Signed-off-by: Cameron Diver <cameron@resin.io>
We add a bunch of additional unit tests, and also a coverage report using istanbul.
The tests are not meant to cover everything, but they're a first attempt at having *some* unit testing
on the supervisor. There's much to improve but hopefully it helps catch obvious errors.
Change-Type: patch
Signed-off-by: Pablo Carranza Velez <pablo@resin.io>
This is to combat when a working directory is in the compose file for a
service with a trailing slash. Docker will strip this slash and that
means service comparisons will fail going forward - even if they are the
same.
Change-type: patch
Closes: #635
Signed-off-by: Cameron Diver <cameron@resin.io>
