mirror of
https://github.com/zerotier/ZeroTierOne.git
synced 2024-12-27 00:21:05 +00:00
86 lines
3.5 KiB
Plaintext
86 lines
3.5 KiB
Plaintext
|
|
tun/tap driver for Mac OS X
|
|
===========================
|
|
|
|
This is an experimental IP tunnel/ethertap driver for Mac OS X/Darwin. It
|
|
provides /dev/tunX and /dev/tapX devices. The maximum number of devices can be
|
|
configured at compile time, it is currently set to 16. That should be enough in
|
|
most cases.
|
|
|
|
The driver ships as two kernel extensions, one for tap and one for tun. They are
|
|
located in /Library/Extensions and can also be loaded and unloaded by hand. If
|
|
you install the startup item, the system will load them automatically at
|
|
startup (tun and tap startup items get installed in /Library/StartupItems).
|
|
|
|
Operation & Programming notes
|
|
=============================
|
|
|
|
tapX are ethertap devices which provide an interface to the kernel's ethernet
|
|
layer. Packets can be read from and written to the /dev/tapX character devices
|
|
one at a time (same name as the interface that shows up in ifconfig).
|
|
|
|
tunX are IP tunnel devices. These can be used to exchange IP packets with the
|
|
kernel. You will get single packets for each read() and should write() packets
|
|
one at a time to /dev/tunX.
|
|
|
|
There are some special ioctls with the tun devices that allow you to have them
|
|
prepend the address family of the packet when reading it from /dev/tunX. Using
|
|
this mode the driver also expects you put this 4-byte address family field
|
|
(network byte order) in front of the packets you write to /dev/tunX.
|
|
|
|
Here are the ioctls to setup up address prepending mode (for convenience there
|
|
also is a header called tun_ioctls.h in the source package that you can use)
|
|
Set the int argument to one if you want to have AF prepending, use 0 if you want
|
|
to switch it off.
|
|
|
|
#define TUNSIFHEAD _IOW('t', 96, int)
|
|
#define TUNGIFHEAD _IOR('t', 97, int)
|
|
|
|
Prepending mode is off by default. Currently it is not recommended to switch the
|
|
mode while packets are in flight on the device.
|
|
|
|
The character devices are always visible in the filesystem as /dev/tunX and
|
|
/dev/tapX. The number of available character devices is a compile time constant
|
|
and is currently fixed to 16. Each character devices is associated with a
|
|
network interface of the same name. The network interfaces are only created when
|
|
the corresponding character device is opened by a program and will be removed
|
|
when the character device is closed.
|
|
|
|
The character devices currently provide a pretty minimal interface. Whole
|
|
packets are read and written using a singe read/write call. File descriptors
|
|
opened on the devices can also be select()ed and support O_NONBLOCK.
|
|
Asynchronous i/o and some ioctls are currently unimplemented, but implementing
|
|
them shouldn't be very hard. Do it yourself or contact me if you can't live
|
|
without.
|
|
|
|
There is another limitation imposed by the Darwin 8 kernel. It concerns the
|
|
poll() system call; Darwin currently does *not* support that for (character)
|
|
devices. Use select() instead.
|
|
|
|
The interfaces can be configured using ifconfig, the tap devices also support
|
|
setting the MAC address to be used. Both tun and tap should be ready for IPv6.
|
|
Just setup addresses and routing as you would do with other interfaces.
|
|
|
|
Please contact me if you find any bugs or have suggestions.
|
|
|
|
Enjoy!
|
|
|
|
Mattias
|
|
<mattias.nissler@gmx.de>
|
|
|
|
|
|
Uninstalling
|
|
============
|
|
|
|
The installer packages for OS X currently don't have support for uninstall as
|
|
the installer doesn't provide it. Remove the following directories if you want
|
|
to completely remove the files installed:
|
|
|
|
/Library/Extensions/tap.kext
|
|
/Library/Extensions/tun.kext
|
|
/Library/StartupItems/tap
|
|
/Library/StartupItems/tun
|
|
|
|
Unload the the kernel extensions or reboot and you're done.
|
|
|