/** * @file * * lwIP Options Configuration */ /* * Copyright (c) 2001-2004 Swedish Institute of Computer Science. * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. The name of the author may not be used to endorse or promote products * derived from this software without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT * SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY * OF SUCH DAMAGE. * * This file is part of the lwIP TCP/IP stack. * * Author: Adam Dunkels * */ #ifndef __LWIPOPTS_H__ #define __LWIPOPTS_H__ /* * Include user defined options first. Anything not defined in these files * will be set to standard values. Override anything you dont like! */ #include "lwip/debug.h" //#define TCP_MSS 2048 //#define TCP_WND 512 /*------------------------------------------------------------------------------ ---------------------------------- Timers -------------------------------------- ------------------------------------------------------------------------------*/ /* these are originally defined in tcp_impl.h */ #ifndef TCP_TMR_INTERVAL /* The TCP timer interval in milliseconds. */ #define TCP_TMR_INTERVAL 250 #endif /* TCP_TMR_INTERVAL */ #ifndef TCP_FAST_INTERVAL /* the fine grained timeout in milliseconds */ #define TCP_FAST_INTERVAL TCP_TMR_INTERVAL #endif /* TCP_FAST_INTERVAL */ #ifndef TCP_SLOW_INTERVALs /* the coarse grained timeout in milliseconds */ #define TCP_SLOW_INTERVAL (2*TCP_TMR_INTERVAL) #endif /* TCP_SLOW_INTERVAL */ /*------------------------------------------------------------------------------ --------------------------- Platform specific locking ------------------------- ------------------------------------------------------------------------------*/ /** * SYS_LIGHTWEIGHT_PROT==1: if you want inter-task protection for certain * critical regions during buffer allocation, deallocation and memory * allocation and deallocation. */ #define SYS_LIGHTWEIGHT_PROT 0 /** * NO_SYS==1: Provides VERY minimal functionality. Otherwise, * use lwIP facilities. */ /* set to 1 so we have no thread behaviour */ #define NO_SYS 1 /* set to 1 so we can use our own timers */ #define NO_SYS_NO_TIMERS 1 /*------------------------------------------------------------------------------ -------------------------------- Memory options -------------------------------- ------------------------------------------------------------------------------*/ #define LWIP_CHKSUM_ALGORITHM 2 /** * MEM_ALIGNMENT: should be set to the alignment of the CPU * 4 byte alignment -> #define MEM_ALIGNMENT 4 * 2 byte alignment -> #define MEM_ALIGNMENT 2 */ #define MEM_ALIGNMENT 1 /** * MEM_SIZE: the size of the heap memory. If the application will send * a lot of data that needs to be copied, this should be set high. */ #define MEM_SIZE 1024 * 1024 * 64 #define TCP_SND_BUF 1024 * 63 /*------------------------------------------------------------------------------ -------------------------- Internal Memory Pool Sizes -------------------------- ------------------------------------------------------------------------------*/ /** * MEMP_NUM_PBUF: the number of memp struct pbufs (used for PBUF_ROM and PBUF_REF). * If the application sends a lot of data out of ROM (or other static memory), * this should be set high. */ #define MEMP_NUM_PBUF 256 /** * MEMP_NUM_RAW_PCB: Number of raw connection PCBs * (requires the LWIP_RAW option) */ #define MEMP_NUM_RAW_PCB 128 /** * MEMP_NUM_UDP_PCB: the number of UDP protocol control blocks. One * per active UDP "connection". * (requires the LWIP_UDP option) */ #define MEMP_NUM_UDP_PCB 4 /** * MEMP_NUM_TCP_PCB: the number of simulatenously active TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB 128 /** * MEMP_NUM_TCP_PCB_LISTEN: the number of listening TCP connections. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_PCB_LISTEN 128 /** * MEMP_NUM_TCP_SEG: the number of simultaneously queued TCP segments. * (requires the LWIP_TCP option) */ #define MEMP_NUM_TCP_SEG 128 /** * MEMP_NUM_REASSDATA: the number of simultaneously IP packets queued for * reassembly (whole packets, not fragments!) */ #define MEMP_NUM_REASSDATA 1 /** * MEMP_NUM_ARP_QUEUE: the number of simulateously queued outgoing * packets (pbufs) that are waiting for an ARP request (to resolve * their destination address) to finish. * (requires the ARP_QUEUEING option) */ #define MEMP_NUM_ARP_QUEUE 2 /** * MEMP_NUM_SYS_TIMEOUT: the number of simulateously active timeouts. * (requires NO_SYS==0) */ #define MEMP_NUM_SYS_TIMEOUT 3 /** * MEMP_NUM_NETBUF: the number of struct netbufs. * (only needed if you use the sequential API, like api_lib.c) */ #define MEMP_NUM_NETBUF 2 /** * MEMP_NUM_NETCONN: the number of struct netconns. * (only needed if you use the sequential API, like api_lib.c) */ #define MEMP_NUM_NETCONN 4 /** * MEMP_NUM_TCPIP_MSG_API: the number of struct tcpip_msg, which are used * for callback/timeout API communication. * (only needed if you use tcpip.c) */ #define MEMP_NUM_TCPIP_MSG_API 8 /** * MEMP_NUM_TCPIP_MSG_INPKT: the number of struct tcpip_msg, which are used * for incoming packets. * (only needed if you use tcpip.c) */ #define MEMP_NUM_TCPIP_MSG_INPKT 8 /** * PBUF_POOL_SIZE: the number of buffers in the pbuf pool. */ #define PBUF_POOL_SIZE 128 /* was 32 */ /*------------------------------------------------------------------------------ ----------------------------------- ARP options -------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_ARP==1: Enable ARP functionality. */ #define LWIP_ARP 1 /*------------------------------------------------------------------------------ ------------------------------------ IP options--------------------------------- ------------------------------------------------------------------------------*/ /** * IP_FORWARD==1: Enables the ability to forward IP packets across network * interfaces. If you are going to run lwIP on a device with only one network * interface, define this to 0. */ #define IP_FORWARD 0 /** * IP_OPTIONS: Defines the behavior for IP options. * IP_OPTIONS_ALLOWED==0: All packets with IP options are dropped. * IP_OPTIONS_ALLOWED==1: IP options are allowed (but not parsed). */ #define IP_OPTIONS_ALLOWED 1 /** * IP_REASSEMBLY==1: Reassemble incoming fragmented IP packets. Note that * this option does not affect outgoing packet sizes, which can be controlled * via IP_FRAG. */ #define IP_REASSEMBLY 1 /** * IP_FRAG==1: Fragment outgoing IP packets if their size exceeds MTU. Note * that this option does not affect incoming packet sizes, which can be * controlled via IP_REASSEMBLY. */ #define IP_FRAG 1 /** * IP_REASS_MAXAGE: Maximum time (in multiples of IP_TMR_INTERVAL - so seconds, normally) * a fragmented IP packet waits for all fragments to arrive. If not all fragments arrived * in this time, the whole packet is discarded. */ #define IP_REASS_MAXAGE 3 /** * IP_REASS_MAX_PBUFS: Total maximum amount of pbufs waiting to be reassembled. * Since the received pbufs are enqueued, be sure to configure * PBUF_POOL_SIZE > IP_REASS_MAX_PBUFS so that the stack is still able to receive * packets even if the maximum amount of fragments is enqueued for reassembly! */ #define IP_REASS_MAX_PBUFS 4 /** * IP_FRAG_USES_STATIC_BUF==1: Use a static MTU-sized buffer for IP * fragmentation. Otherwise pbufs are allocated and reference the original * packet data to be fragmented. */ #define IP_FRAG_USES_STATIC_BUF 0 /** * IP_DEFAULT_TTL: Default value for Time-To-Live used by transport layers. */ #define IP_DEFAULT_TTL 255 /*------------------------------------------------------------------------------ ------------------------------- ICMP Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_ICMP==1: Enable ICMP module inside the IP stack. * Be careful, disable that make your product non-compliant to RFC1122 */ #define LWIP_ICMP 1 /*------------------------------------------------------------------------------ ------------------------------- RAW Options ------------------------------------ ------------------------------------------------------------------------------*/ /** * LWIP_RAW==1: Enable application layer to hook into the IP layer itself. */ #define LWIP_RAW 1 /*------------------------------------------------------------------------------ ------------------------------- DHCP Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_DHCP==1: Enable DHCP module. */ #define LWIP_DHCP 0 /*------------------------------------------------------------------------------ ------------------------------ AUTOIP Options ---------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_AUTOIP==1: Enable AUTOIP module. */ #define LWIP_AUTOIP 0 /*------------------------------------------------------------------------------ ------------------------------- SNMP Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_SNMP==1: Turn on SNMP module. UDP must be available for SNMP * transport. */ #define LWIP_SNMP 0 /*------------------------------------------------------------------------------ ------------------------------- IGMP Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_IGMP==1: Turn on IGMP module. */ #define LWIP_IGMP 0 /*------------------------------------------------------------------------------ -------------------------------- DNS Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_DNS==1: Turn on DNS module. UDP must be available for DNS * transport. */ #define LWIP_DNS 0 /*------------------------------------------------------------------------------ -------------------------------- UDP Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_UDP==1: Turn on UDP. */ #define LWIP_UDP 1 /*------------------------------------------------------------------------------ -------------------------------- TCP Options ----------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_TCP==1: Turn on TCP. */ #define LWIP_TCP 1 #define LWIP_LISTEN_BACKLOG 0 /*------------------------------------------------------------------------------ -------------------------------- Pbuf Options ---------------------------------- ------------------------------------------------------------------------------*/ /** * PBUF_LINK_HLEN: the number of bytes that should be allocated for a * link level header. The default is 14, the standard value for * Ethernet. */ #define PBUF_LINK_HLEN 16 /** * PBUF_POOL_BUFSIZE: the size of each pbuf in the pbuf pool. The default is * designed to accomodate single full size TCP frame in one pbuf, including * TCP_MSS, IP header, and link header. * */ #define PBUF_POOL_BUFSIZE LWIP_MEM_ALIGN_SIZE(TCP_MSS+40+PBUF_LINK_HLEN) /*------------------------------------------------------------------------------ --------------------------------- LOOPIF Options ------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_HAVE_LOOPIF==1: Support loop interface (127.0.0.1) and loopif.c */ #define LWIP_HAVE_LOOPIF 0 /*------------------------------------------------------------------------------ ---------------------------- Sequential Layer Options -------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_NETCONN==1: Enable Netconn API (require to use api_lib.c) */ #define LWIP_NETCONN 0 /*------------------------------------------------------------------------------ --------------------------------- Socket Options ------------------------------- ------------------------------------------------------------------------------*/ /** * LWIP_SOCKET==1: Enable Socket API (require to use sockets.c) */ #define LWIP_SOCKET 0 /*------------------------------------------------------------------------------ ------------------------------ Statistics Options ------------------------------ ------------------------------------------------------------------------------*/ /** * LWIP_STATS==1: Enable statistics collection in lwip_stats. */ #define LWIP_STATS 1 /*------------------------------------------------------------------------------ --------------------------------- PPP Options ---------------------------------- ------------------------------------------------------------------------------*/ /** * PPP_SUPPORT==1: Enable PPP. */ #define PPP_SUPPORT 0 /* Misc */ #define MEM_LIBC_MALLOC 1 #define MEMP_MEM_MALLOC 0 #endif /* __LWIPOPTS_H__ */