Ren Jie
21656ba015
Update controller README.md
...
Sync make parameter with code.
2016-01-12 22:51:08 +08:00
Adam Ierymenko
436c1fac1d
Selectively move over changes from "edge" to "dev" excluding netcon.
2015-12-21 16:15:39 -08:00
Adam Ierymenko
523412edfb
Abort backup in progress if thread is told to shut down.
2015-11-03 16:03:00 -08:00
Adam Ierymenko
f7a407ffa0
Tweak timings and use lock in backup to make it a bit faster and still permit main thread to work.
2015-11-03 15:56:24 -08:00
Adam Ierymenko
7903f24a8f
Create periodic backup copies of controller.db in network controller from the main process itself to facilitate easier and safer backups of controller.db.
2015-11-03 15:52:10 -08:00
Adam Ierymenko
eff1fe3c61
Create files for each hop (more convenient) and fix a packet parse bug.
2015-10-09 16:22:34 -07:00
Adam Ierymenko
7d01fab132
Reorg fields to be in same order as FS scheme.
2015-10-09 15:18:01 -07:00
Adam Ierymenko
aec13b50fd
Be a bit more verbose in circuit test reports to more clearly track current and upstream hop in graph traversal history.
2015-10-09 15:05:26 -07:00
Adam Ierymenko
a95fa379cc
Circuit tests basically work but need some tweaks, and fix some issues found with valgrind.
2015-10-09 14:51:38 -07:00
Adam Ierymenko
6b5bb0b278
Eliminate format string warnings.
2015-10-09 12:22:13 -07:00
Adam Ierymenko
59da8b2a4b
Logging of circuit test results to disk.
2015-10-08 15:44:06 -07:00
Adam Ierymenko
a3876353ca
Abiltiy to post a test via the controller web API, and parsing of CIRCUIT_TEST_REPORT messages.
2015-10-08 13:25:38 -07:00
Adam Ierymenko
7394ec6f6a
Prep in controller code to run tests.
2015-10-06 15:56:18 -07:00
Adam Ierymenko
a7bd1eaa40
Never assign v4 IPs ending in .255 even within range.
2015-09-28 15:28:30 -07:00
Adam Ierymenko
ddf3d1f949
Controller side support for IPv6 assignment.
2015-09-18 13:35:00 -07:00
Adam Ierymenko
610ab0750c
Drop Sqlite-based Log table for now and switch to an in-memory log for recent activity. Log table gets too big on busy nodes. Should probably support push of events to some kind of event system later.
2015-09-15 10:59:23 -07:00
Adam Ierymenko
ef316ced3b
Fix JSON.
2015-09-14 11:59:43 -07:00
Adam Ierymenko
cd005341c5
Extra statement to clean up Members -- cascade did not seem to work, possibly due to dual key.
2015-09-11 15:02:26 -07:00
Adam Ierymenko
a35fa7ac93
Add expansion of netconf in _test field.
2015-09-10 15:14:10 -07:00
Adam Ierymenko
bebe3d7cfa
Fix deadlock in test mode.
2015-09-10 14:47:04 -07:00
Adam Ierymenko
1f7a41cff8
Fix to allowing identity to be populated if not present.
2015-09-10 14:37:34 -07:00
Adam Ierymenko
4fbcad2468
Allow identity to be populated for newly inserted Member objects to permit transfer from old network controller and testing.
2015-09-08 13:02:42 -07:00
Adam Ierymenko
0d386f1c31
Add a bit of useful testing instrumentation to SqliteNetworkController.
2015-09-08 11:35:55 -07:00
Adam Ierymenko
2aa1b5d9b7
Add clock helper field to both member and network to permit time duration calculation easily.
2015-08-24 12:44:07 -07:00
Adam Ierymenko
9a5be0a092
typo
2015-08-24 11:24:33 -07:00
Adam Ierymenko
4da794b389
Add authorizedMemberCount to controller network config records.
2015-08-19 11:43:56 -07:00
Adam Ierymenko
0a5429cab0
Lookup of member must be a left outer join in case the member is being manually inserted before we see the node.
2015-08-17 21:08:02 +00:00
Adam Ierymenko
fcc5bf1e66
Go ahead and spec out controller DB support for AuthToken -- GitHub issue #211 -- even though full implementation won't make it into 1.0.4.
2015-07-29 15:09:23 -07:00
Adam Ierymenko
d57ea671d7
Add version to log.
2015-07-24 09:59:17 -07:00
Adam Ierymenko
d647a587a1
(1) Fix updating of network revision counter on member change.
...
(2) Go back to timestamp as certificate revision number. This is simpler
and more robust than using the network revision number for this and
forcing network revision fast-forward, which could cause some peers
to fall off the horizon when you don't want them to.
2015-07-23 17:18:20 -07:00
Adam Ierymenko
b3516c599b
Add a rate limiting circuit breaker to the network controller to prevent flooding attacks and race conditions.
2015-07-23 10:10:17 -07:00
Adam Ierymenko
3ba54c7e35
Eliminate some poorly thought out optimizations from the netconf/controller interaction,
...
and go ahead and bump version to 1.0.4.
For a while in 1.0.3 -dev I was trying to optimize out repeated network controller
requests by using a ratcheting mechanism. If the client received a network config
that was indeed different from the one it had, it would respond by instantlly
requesting it again.
Not sure what I was thinking. It's fundamentally unsafe to respond to a message
with another message of the same type -- it risks a race condition. In this case
that's exactly what could happen.
It just isn't worth the added complexity to avoid a tiny, tiny amount of network
overhead, so I've taken this whole path out.
A few extra bytes every two minutes isn't worth fretting about, but as I recall
the reason for this optimization was to save CPU on the controller. This can be
achieved by just caching responses in memory *there* and serving those same
responses back out if they haven't changed.
I think I developed that 'ratcheting' stuff before I went full time on this. It's
hard to develop stuff like this without hours of sustained focus.
2015-07-23 09:50:10 -07:00
Adam Ierymenko
e2a2993b18
Add a Log table to log queries for debugging and security logging. No JSON API support for querying the log yet, but will probably come via /network/###/member/###/log/... or something.
2015-07-22 14:01:49 -07:00
Kees Bos
53c7f61f98
Fix for output of empty (no members) network
2015-07-05 13:27:27 +02:00
Adam Ierymenko
7c761dea72
Fix to member listing: I wanted an object with member IDs as keys and member revisions as values, not an array.
2015-07-21 14:12:22 -07:00
Adam Ierymenko
3f8a5b8b76
List members in the form of a hash of member ID and member revision so code can quickly detect which members have changed.
2015-07-21 13:38:59 -07:00
Adam Ierymenko
a061aa3d87
Remove "members" from Network record and instead enumerate members via specific query to /network/nwid/member sub-path. More RESTful, scalable, and compatible with how OnePoint code works.
2015-07-21 12:57:01 -07:00
Adam Ierymenko
b343eac10d
Fix IP auto-assign bug due to missing subnet routes.
2015-07-21 12:42:43 -07:00
Adam Ierymenko
649a12472b
Report controllerInstanceId in all objects so that controller resets can be easily detected by whatever is using the service.
2015-07-21 10:39:29 -07:00
Adam Ierymenko
cac6be87ba
Fix bug in rules JSON output.
2015-07-20 16:31:37 -07:00
Adam Ierymenko
38d34a7495
Proper handling of NULL entry for etherType in rules table.
2015-07-20 15:11:53 -07:00
Adam Ierymenko
fb4c3dd8d4
Fix string overwrite bug.
2015-07-20 14:31:33 -07:00
Adam Ierymenko
1ffd67e014
Get rid of false foreign key in Relay.
2015-07-20 14:28:30 -07:00
Adam Ierymenko
bca8886ff8
IP assignment pool range bug fix.
2015-07-17 15:09:28 -07:00
Adam Ierymenko
1f7bb67069
Fix some SQL and make instanceId more robustly random.
2015-07-17 13:09:53 -07:00
Adam Ierymenko
712e2785f2
Fix bad JSON in response.
2015-07-17 12:24:42 -07:00
Adam Ierymenko
5515909c1e
Add a concept of an "instanceId" to the controller, which the OnePoint can use to determine whether it is the same running database instance it already knows.
2015-07-17 10:47:21 -07:00
Adam Ierymenko
0db7c94c90
Add memberRevision stuff to JSON output, and update docs.
2015-07-16 17:42:47 -07:00
Adam Ierymenko
99969b186b
Add a concept of a member revision counter to networks. This can be used to select all members that have been added or changed since a given point.
2015-07-16 17:34:03 -07:00
Adam Ierymenko
f9f7de0ec7
Networks don't need their ID as a default name.
2015-07-14 15:54:56 -07:00
